From: Andre Przywara <andre.przywara@arm.com>
To: Jesse Taube <mr.bossman075@gmail.com>
Cc: u-boot@lists.denx.de, jagan@amarulasolutions.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, jernej.skrabec@gmail.com, hs@denx.de,
samuel@sholland.org, arnaud.ferraris@gmail.com,
giulio.benetti@benettiengineering.com,
thirtythreeforty@gmail.com
Subject: Re: [PATCH v2 00/12] Add support for SUNIV and F1C100s.
Date: Sat, 29 Jan 2022 02:40:34 +0000 [thread overview]
Message-ID: <20220129024034.78c2f30a@slackpad.fritz.box> (raw)
In-Reply-To: <20220126135329.2997430-1-Mr.Bossman075@gmail.com>
On Wed, 26 Jan 2022 08:53:17 -0500
Jesse Taube <mr.bossman075@gmail.com> wrote:
Hi Jesse,
> This patch set aims to add support for the SUNIV and F1C100s.
> Support has been in linux for a while now, but not in u-boot.
>
> This patchset contains:
> - CPU specific initialization code
> - SUNIV dram driver
> - SUNIV clock driver adaption
> - SUNIV gpio driver adaption
> - SUNIV uart driver adaption
> - F1C100s basic support
>
> The SUNIV seems to be similar to sun6i and sun4i, so we use code from
> both platforms. We also add suniv to the cpu dircetory as it uses arm926ejs.
>
> NOTE: To work this will need patchset "sunxi: remove lowlevel_init".
So I think I am done with reviewing this version. Please send an
updated version. If there are smaller issues left, I will probably just
fix them up while committing.
Thanks for your good and prompt work on this!
Cheers,
Andre
>
> Icenowy Zheng (11):
> arm: arm926ej-s: start.S: port save_boot_params support from armv7
> code
> arm: arm926ej-s: Add sunxi code
> dt-bindings: clock: Add initial suniv headers
> dt-bindings: reset: Add initial suniv headers
> ARM: sunxi: Add clock and uart to sunxi headers
> sunxi: Add F1C100s DRAM initial support
> sunxi: board: Add support for SUNIV
> configs: sunxi: Add common SUNIV header
> mach-sunxi: Add support for SUNIV architecture
> ARM: dts: suniv: Add device tree files for F1C100s
> configs: sunxi: Add support for Lichee Pi Nano
>
> Jesse Taube (1):
> mach-sunxi: Move timer code to mach folder
>
> arch/arm/cpu/arm926ejs/Makefile | 1 +
> arch/arm/cpu/arm926ejs/start.S | 19 +
> arch/arm/cpu/arm926ejs/sunxi/Makefile | 5 +
> arch/arm/cpu/arm926ejs/sunxi/config.mk | 6 +
> arch/arm/cpu/arm926ejs/sunxi/fel_utils.S | 33 ++
> arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds | 48 ++
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/suniv-f1c100s-licheepi-nano.dts | 29 ++
> arch/arm/dts/suniv-f1c100s.dtsi | 6 +
> arch/arm/dts/suniv.dtsi | 160 +++++++
> arch/arm/include/asm/arch-sunxi/clock.h | 2 +-
> arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 13 +
> arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 +
> arch/arm/include/asm/arch-sunxi/dram.h | 2 +
> arch/arm/include/asm/arch-sunxi/dram_suniv.h | 46 ++
> arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> arch/arm/mach-sunxi/Kconfig | 16 +-
> arch/arm/mach-sunxi/Makefile | 5 +
> arch/arm/mach-sunxi/board.c | 28 +-
> arch/arm/mach-sunxi/clock.c | 3 +-
> arch/arm/mach-sunxi/clock_sun6i.c | 46 +-
> arch/arm/mach-sunxi/cpu_info.c | 2 +
> arch/arm/mach-sunxi/dram_helpers.c | 4 +
> arch/arm/mach-sunxi/dram_suniv.c | 420 ++++++++++++++++++
> .../{cpu/armv7/sunxi => mach-sunxi}/timer.c | 7 +-
> board/sunxi/board.c | 4 +-
> configs/licheepi_nano_defconfig | 15 +
> include/configs/suniv.h | 14 +
> include/configs/sunxi-common.h | 59 ++-
> include/dt-bindings/clock/suniv-ccu.h | 69 +++
> include/dt-bindings/reset/suniv-ccu.h | 37 ++
> 31 files changed, 1080 insertions(+), 28 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/config.mk
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/fel_utils.S
> create mode 100644 arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds
> create mode 100644 arch/arm/dts/suniv-f1c100s-licheepi-nano.dts
> create mode 100644 arch/arm/dts/suniv-f1c100s.dtsi
> create mode 100644 arch/arm/dts/suniv.dtsi
> create mode 100644 arch/arm/include/asm/arch-sunxi/dram_suniv.h
> create mode 100644 arch/arm/mach-sunxi/dram_suniv.c
> rename arch/arm/{cpu/armv7/sunxi => mach-sunxi}/timer.c (97%)
> create mode 100644 configs/licheepi_nano_defconfig
> create mode 100644 include/configs/suniv.h
> create mode 100644 include/dt-bindings/clock/suniv-ccu.h
> create mode 100644 include/dt-bindings/reset/suniv-ccu.h
>
next prev parent reply other threads:[~2022-01-29 2:40 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 13:53 [PATCH v2 00/12] Add support for SUNIV and F1C100s Jesse Taube
2022-01-26 13:53 ` [PATCH v2 01/12] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-26 13:53 ` [PATCH v2 02/12] mach-sunxi: Move timer code to mach folder Jesse Taube
2022-01-27 10:21 ` Andre Przywara
2022-01-27 20:40 ` Jesse Taube
2022-01-28 0:41 ` Andre Przywara
2022-01-28 4:51 ` Jesse Taube
2022-01-28 14:28 ` Andre Przywara
2022-01-28 22:40 ` Jesse Taube
2022-01-26 13:53 ` [PATCH v2 03/12] arm: arm926ej-s: Add sunxi code Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-29 2:42 ` Jesse Taube
2022-01-29 11:22 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 04/12] dt-bindings: clock: Add initial suniv headers Jesse Taube
2022-01-29 2:05 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 05/12] dt-bindings: reset: " Jesse Taube
2022-01-26 13:53 ` [PATCH v2 06/12] ARM: sunxi: Add clock and uart to sunxi headers Jesse Taube
2022-01-29 2:11 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 07/12] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-26 13:53 ` [PATCH v2 08/12] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-26 13:53 ` [PATCH v2 09/12] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 17:43 ` Jesse Taube
2022-01-29 2:18 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 10/12] mach-sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 13:53 ` [PATCH v2 11/12] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-29 2:25 ` Andre Przywara
2022-01-29 2:31 ` Jesse Taube
2022-01-29 2:37 ` Andre Przywara
2022-01-29 3:01 ` Jesse Taube
2022-01-29 11:25 ` Andre Przywara
2022-01-26 13:53 ` [PATCH v2 12/12] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-29 2:40 ` Andre Przywara [this message]
2022-01-29 2:44 ` [PATCH v2 00/12] Add support for SUNIV and F1C100s Jesse Taube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220129024034.78c2f30a@slackpad.fritz.box \
--to=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=marek.behun@nic.cz \
--cc=mr.bossman075@gmail.com \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.