From: Jeevan B <jeevan.b@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t] tests/kms_extended: Add test for extended mode
Date: Wed, 9 Feb 2022 20:37:59 +0530 [thread overview]
Message-ID: <20220209150759.4845-1-jeevan.b@intel.com> (raw)
Add test for validation of extended mode.
Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
tests/kms_extended.c | 244 +++++++++++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
2 files changed, 245 insertions(+)
create mode 100644 tests/kms_extended.c
diff --git a/tests/kms_extended.c b/tests/kms_extended.c
new file mode 100644
index 00000000..7d8cd85d
--- /dev/null
+++ b/tests/kms_extended.c
@@ -0,0 +1,244 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Jeevan B <jeevan.b@intel.com>
+ */
+#include "config.h"
+
+#include "igt.h"
+#include <cairo.h>
+#include <errno.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/time.h>
+#include <math.h>
+
+static int drm_fd;
+static drmModeRes *resources;
+
+struct test_output {
+ int mode_valid;
+ drmModeModeInfo kmode[4];
+ drmModeEncoder *kencoder[4];
+ drmModeConnector *kconnector[4];
+ uint32_t _connector[4];
+ uint32_t _crtc[4];
+ int _pipe[4];
+ int count; /* 1:1 mapping between crtc:connector */
+ int pipe; /* primary pipe for vblank */
+ unsigned int fb_width;
+ unsigned int fb_height;
+ unsigned int fb_ids[3];
+ struct igt_fb fb_info[3];
+};
+
+static void free_test_output(struct test_output *o)
+{
+ int i;
+
+ for (i = 0; i < o->count; i++) {
+ drmModeFreeEncoder(o->kencoder[i]);
+ drmModeFreeConnector(o->kconnector[i]);
+ }
+}
+
+static bool mode_compatible(const drmModeModeInfo *a, const drmModeModeInfo *b)
+{
+ int d_refresh;
+
+ if (a->hdisplay != b->hdisplay)
+ return false;
+
+ if (a->vdisplay != b->vdisplay)
+ return false;
+
+ d_refresh = a->vrefresh - b->vrefresh;
+ if (d_refresh < -1 || d_refresh > 1)
+ return false;
+
+ return true;
+}
+
+static void connector_find_compatible_mode(int crtc_idx0, int crtc_idx1,
+ struct test_output *o)
+{
+ struct kmstest_connector_config config[2];
+ drmModeModeInfo *mode[2];
+ int n, m;
+
+ if (!kmstest_get_connector_config(drm_fd, o->_connector[0],
+ 1 << crtc_idx0, &config[0]))
+ return;
+
+ if (!kmstest_get_connector_config(drm_fd, o->_connector[1],
+ 1 << crtc_idx1, &config[1])) {
+ kmstest_free_connector_config(&config[0]);
+ return;
+ }
+
+ mode[0] = &config[0].default_mode;
+ mode[1] = &config[1].default_mode;
+ if (!mode_compatible(mode[0], mode[1])) {
+ for (n = 0; n < config[0].connector->count_modes; n++) {
+ mode[0] = &config[0].connector->modes[n];
+ for (m = 0; m < config[1].connector->count_modes; m++) {
+ mode[1] = &config[1].connector->modes[m];
+ if (mode_compatible(mode[0], mode[1]))
+ goto found;
+ }
+ }
+
+ mode[1] = mode[0] = &config[0].default_mode;
+ }
+
+found:
+ o->pipe = config[0].pipe;
+ o->fb_width = mode[0]->hdisplay;
+ o->fb_height = mode[0]->vdisplay;
+ o->mode_valid = 1;
+
+ o->kconnector[0] = config[0].connector;
+ o->kencoder[0] = config[0].encoder;
+ o->_crtc[0] = config[0].crtc->crtc_id;
+ o->_pipe[0] = config[0].pipe;
+ o->kmode[0] = *mode[0];
+
+ o->kconnector[1] = config[1].connector;
+ o->kencoder[1] = config[1].encoder;
+ o->_crtc[1] = config[1].crtc->crtc_id;
+ o->_pipe[1] = config[1].pipe;
+ o->kmode[1] = *mode[1];
+
+ drmModeFreeCrtc(config[0].crtc);
+ drmModeFreeCrtc(config[1].crtc);
+}
+
+
+static int run_extendedmode_basic(void)
+{
+ int i, j, m, n, modes = 0, ret = 0;
+ struct test_output o;
+
+ resources = drmModeGetResources(drm_fd);
+ igt_require(resources);
+
+ /* Find a pair of connected displays*/
+ for (i = 0; i < resources->count_connectors; i++) {
+ for (n = 0; n < resources->count_crtcs; n++) {
+ for (j = i + 1; j < resources->count_connectors; j++) {
+ for (m = n + 1; m < resources->count_crtcs; m++) {
+ memset(&o, 0, sizeof(o));
+ o.count = 2;
+ o._connector[0] = resources->connectors[i];
+ o._connector[1] = resources->connectors[j];
+
+ connector_find_compatible_mode(n, m, &o);
+ if (o.mode_valid)
+ modes++;
+
+ free_test_output(&o);
+
+ }
+ }
+ }
+ }
+
+ /* If we have fewer than 2 connected outputs then we won't have any
+ * configuration at all. So skip in that case. */
+ igt_require_f(modes, "At least two displays required\n");
+
+ /* Find a pair of connected displays */
+ for (i = 0; i < resources->count_connectors; i++) {
+ for (n = 0; n < resources->count_crtcs; n++) {
+ for (j = i + 1; j < resources->count_connectors; j++) {
+ for (m = n + 1; m < resources->count_crtcs; m++) {
+ int crtc_idxs[2];
+
+ memset(&o, 0, sizeof(o));
+ o.count = 2;
+ o._connector[0] = resources->connectors[i];
+ o._connector[1] = resources->connectors[j];
+
+ crtc_idxs[0] = n;
+ crtc_idxs[1] = m;
+
+ connector_find_compatible_mode(crtc_idxs[0], crtc_idxs[1], &o);
+ if (!o.mode_valid)
+ return 1;
+ igt_assert_eq(o.count, 2);
+
+ igt_debug("Running Extended Mode on Pipe %s & %s Connector-%s%d-%s%d\n",
+ kmstest_pipe_name(o._pipe[0]), kmstest_pipe_name(o._pipe[1]),
+ kmstest_connector_type_str(o.kconnector[0]->connector_type),
+ o.kconnector[0]->connector_type_id,
+ kmstest_connector_type_str(o.kconnector[1]->connector_type),
+ o.kconnector[1]->connector_type_id);
+
+ o.fb_ids[0] = igt_create_color_pattern_fb(drm_fd,
+ o.fb_width, o.fb_height, DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_MOD_LINEAR, 0, 0, 1, &o.fb_info[0]);
+ igt_assert(o.fb_ids[0]);
+
+ o.fb_ids[1] = igt_create_color_pattern_fb(drm_fd,
+ o.fb_width, o.fb_height, DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_MOD_LINEAR, 0, 0, 1, &o.fb_info[1]);
+ igt_assert(o.fb_ids[1]);
+
+ ret = drmModePageFlip(drm_fd, o._crtc[0], o.fb_ids[0], DRM_MODE_PAGE_FLIP_EVENT, NULL);
+ igt_assert_eq(ret, 0);
+
+ ret = drmModePageFlip(drm_fd, o._crtc[1], o.fb_ids[1], DRM_MODE_PAGE_FLIP_EVENT, NULL);
+ igt_assert_eq(ret, 0);
+
+ igt_remove_fb(drm_fd, &o.fb_info[1]);
+ igt_remove_fb(drm_fd, &o.fb_info[0]);
+
+ free_test_output(&o);
+
+ return 0;
+ }
+ }
+ }
+ }
+
+ drmModeFreeResources(resources);
+ return 1;
+}
+
+igt_main
+{
+
+ igt_fixture {
+ drm_fd = drm_open_driver_master(DRIVER_ANY);
+ igt_enable_connectors(drm_fd);
+ kmstest_set_vt_graphics_mode();
+ }
+
+ igt_describe("This test is to validate pageflip on extended mode");
+ igt_subtest("extended-mode-basic") {
+ run_extendedmode_basic();
+ }
+
+ igt_fixture {
+ drmModeFreeResources(resources);
+ close(drm_fd);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index 7003d064..15825a4a 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -28,6 +28,7 @@ test_progs = [
'kms_dither',
'kms_dp_aux_dev',
'kms_dp_tiled_display',
+ 'kms_extended',
'kms_flip',
'kms_flip_event_leak',
'kms_force_connector_basic',
--
2.17.1
next reply other threads:[~2022-02-09 15:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 15:07 Jeevan B [this message]
2022-02-09 15:49 ` [igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_extended: Add test for extended mode Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220209150759.4845-1-jeevan.b@intel.com \
--to=jeevan.b@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.