From: Colin Foster <colin.foster@in-advantage.com>
To: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Jakub Kicinski <kuba@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
"UNGLinuxDriver@microchip.com" <UNGLinuxDriver@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>
Subject: Re: [PATCH v6 net-next 5/5] net: mscc: ocelot: use bulk reads for stats
Date: Thu, 10 Feb 2022 06:37:23 -0800 [thread overview]
Message-ID: <20220210143723.GA354478@euler> (raw)
In-Reply-To: <20220210103636.gtkky2l2q7jyn7y5@skbuf>
On Thu, Feb 10, 2022 at 10:36:37AM +0000, Vladimir Oltean wrote:
> On Wed, Feb 09, 2022 at 08:13:45PM -0800, Colin Foster wrote:
> > Create and utilize bulk regmap reads instead of single access for gathering
> > stats. The background reading of statistics happens frequently, and over
> > a few contiguous memory regions.
> >
> > High speed PCIe buses and MMIO access will probably see negligible
> > performance increase. Lower speed buses like SPI and I2C could see
> > significant performance increase, since the bus configuration and register
> > access times account for a large percentage of data transfer time.
> >
> > Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
> > ---
> > drivers/net/ethernet/mscc/ocelot.c | 79 +++++++++++++++++++++++++-----
> > include/soc/mscc/ocelot.h | 8 +++
> > 2 files changed, 75 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> > index ab36732e7d3f..fdbd31149dfc 100644
> > --- a/drivers/net/ethernet/mscc/ocelot.c
> > +++ b/drivers/net/ethernet/mscc/ocelot.c
> > @@ -1738,25 +1738,36 @@ void ocelot_get_strings(struct ocelot *ocelot, int port, u32 sset, u8 *data)
> > EXPORT_SYMBOL(ocelot_get_strings);
> >
> > /* Caller must hold &ocelot->stats_lock */
> > -static void ocelot_update_stats_for_port(struct ocelot *ocelot, int port)
> > +static int ocelot_update_stats_for_port(struct ocelot *ocelot, int port)
> > {
> > - int j;
> > + unsigned int idx = port * ocelot->num_stats;
> > + struct ocelot_stats_region *region;
> > + int err, j;
> >
> > /* Configure the port to read the stats from */
> > ocelot_write(ocelot, SYS_STAT_CFG_STAT_VIEW(port), SYS_STAT_CFG);
> >
> > - for (j = 0; j < ocelot->num_stats; j++) {
> > - u32 val;
> > - unsigned int idx = port * ocelot->num_stats + j;
> > + list_for_each_entry(region, &ocelot->stats_regions, node) {
> > + err = ocelot_bulk_read_rix(ocelot, SYS_COUNT_RX_OCTETS,
> > + region->offset, region->buf,
> > + region->count);
> > + if (err)
> > + return err;
> >
> > - val = ocelot_read_rix(ocelot, SYS_COUNT_RX_OCTETS,
> > - ocelot->stats_layout[j].offset);
> > + for (j = 0; j < region->count; j++) {
> > + u64 *stat = &ocelot->stats[idx + j];
> > + u64 val = region->buf[j];
> >
> > - if (val < (ocelot->stats[idx] & U32_MAX))
> > - ocelot->stats[idx] += (u64)1 << 32;
> > + if (val < (*stat & U32_MAX))
> > + *stat += (u64)1 << 32;
> > +
> > + *stat = (*stat & ~(u64)U32_MAX) + val;
> > + }
> >
> > - ocelot->stats[idx] = (ocelot->stats[idx] & ~(u64)U32_MAX) + val;
> > + idx += region->count;
> > }
> > +
> > + return err;
> > }
> >
> > static void ocelot_check_stats_work(struct work_struct *work)
> > @@ -1777,12 +1788,14 @@ static void ocelot_check_stats_work(struct work_struct *work)
> >
> > void ocelot_get_ethtool_stats(struct ocelot *ocelot, int port, u64 *data)
> > {
> > - int i;
> > + int i, err;
> >
> > mutex_lock(&ocelot->stats_lock);
> >
> > /* check and update now */
> > - ocelot_update_stats_for_port(ocelot, port);
> > + err = ocelot_update_stats_for_port(ocelot, port);
>
> ocelot_check_stats_work() should also check for errors.
Worthy enough for a resend. I'll send the fix patch to net with your
correct email and send this update once that gets merged through.
Thanks!
>
> > + if (err)
> > + dev_err(ocelot->dev, "Error %d updating ethtool stats\n", err);
> >
> > /* Copy all counters */
> > for (i = 0; i < ocelot->num_stats; i++)
> > @@ -1801,6 +1814,41 @@ int ocelot_get_sset_count(struct ocelot *ocelot, int port, int sset)
> > }
> > EXPORT_SYMBOL(ocelot_get_sset_count);
> >
> > +static int ocelot_prepare_stats_regions(struct ocelot *ocelot)
> > +{
> > + struct ocelot_stats_region *region = NULL;
> > + unsigned int last;
> > + int i;
> > +
> > + INIT_LIST_HEAD(&ocelot->stats_regions);
> > +
> > + for (i = 0; i < ocelot->num_stats; i++) {
> > + if (region && ocelot->stats_layout[i].offset == last + 1) {
> > + region->count++;
> > + } else {
> > + region = devm_kzalloc(ocelot->dev, sizeof(*region),
> > + GFP_KERNEL);
> > + if (!region)
> > + return -ENOMEM;
> > +
> > + region->offset = ocelot->stats_layout[i].offset;
> > + region->count = 1;
> > + list_add_tail(®ion->node, &ocelot->stats_regions);
> > + }
> > +
> > + last = ocelot->stats_layout[i].offset;
> > + }
> > +
> > + list_for_each_entry(region, &ocelot->stats_regions, node) {
> > + region->buf = devm_kcalloc(ocelot->dev, region->count,
> > + sizeof(*region->buf), GFP_KERNEL);
> > + if (!region->buf)
> > + return -ENOMEM;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > int ocelot_get_ts_info(struct ocelot *ocelot, int port,
> > struct ethtool_ts_info *info)
> > {
> > @@ -2801,6 +2849,13 @@ int ocelot_init(struct ocelot *ocelot)
> > ANA_CPUQ_8021_CFG_CPUQ_BPDU_VAL(6),
> > ANA_CPUQ_8021_CFG, i);
> >
> > + ret = ocelot_prepare_stats_regions(ocelot);
> > + if (ret) {
> > + destroy_workqueue(ocelot->stats_queue);
> > + destroy_workqueue(ocelot->owq);
> > + return ret;
> > + }
> > +
> > INIT_DELAYED_WORK(&ocelot->stats_work, ocelot_check_stats_work);
> > queue_delayed_work(ocelot->stats_queue, &ocelot->stats_work,
> > OCELOT_STATS_CHECK_DELAY);
> > diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> > index 312b72558659..d3291a5f7e88 100644
> > --- a/include/soc/mscc/ocelot.h
> > +++ b/include/soc/mscc/ocelot.h
> > @@ -542,6 +542,13 @@ struct ocelot_stat_layout {
> > char name[ETH_GSTRING_LEN];
> > };
> >
> > +struct ocelot_stats_region {
> > + struct list_head node;
> > + u32 offset;
> > + int count;
> > + u32 *buf;
> > +};
> > +
> > enum ocelot_tag_prefix {
> > OCELOT_TAG_PREFIX_DISABLED = 0,
> > OCELOT_TAG_PREFIX_NONE,
> > @@ -673,6 +680,7 @@ struct ocelot {
> > struct regmap_field *regfields[REGFIELD_MAX];
> > const u32 *const *map;
> > const struct ocelot_stat_layout *stats_layout;
> > + struct list_head stats_regions;
> > unsigned int num_stats;
> >
> > u32 pool_size[OCELOT_SB_NUM][OCELOT_SB_POOL_NUM];
> > --
> > 2.25.1
> >
next prev parent reply other threads:[~2022-02-10 14:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 4:13 [PATCH v6 net-next 0/5] use bulk reads for ocelot statistics Colin Foster
2022-02-10 4:13 ` [PATCH v6 net-next 1/5] net: mscc: ocelot: fix mutex lock error during ethtool stats read Colin Foster
2022-02-10 9:50 ` Vladimir Oltean
2022-02-10 4:13 ` [PATCH v6 net-next 2/5] net: mscc: ocelot: remove unnecessary stat reading from ethtool Colin Foster
2022-02-10 10:34 ` Vladimir Oltean
2022-02-10 4:13 ` [PATCH v6 net-next 3/5] net: ocelot: align macros for consistency Colin Foster
2022-02-10 4:13 ` [PATCH v6 net-next 4/5] net: mscc: ocelot: add ability to perform bulk reads Colin Foster
2022-02-10 4:13 ` [PATCH v6 net-next 5/5] net: mscc: ocelot: use bulk reads for stats Colin Foster
2022-02-10 10:36 ` Vladimir Oltean
2022-02-10 14:37 ` Colin Foster [this message]
2022-02-10 15:21 ` Colin Foster
2022-02-10 15:27 ` Vladimir Oltean
2022-02-10 15:35 ` Colin Foster
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220210143723.GA354478@euler \
--to=colin.foster@in-advantage.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.