All of lore.kernel.org
 help / color / mirror / Atom feed
From: trix@redhat.com
To: joyce.ooi@intel.com, davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Tom Rix <trix@redhat.com>
Subject: [PATCH] net: ethernet: altera: cleanup comments
Date: Tue, 15 Feb 2022 13:38:02 -0800	[thread overview]
Message-ID: <20220215213802.3043178-1-trix@redhat.com> (raw)

From: Tom Rix <trix@redhat.com>

Replacements:
queueing to queuing
trasfer to transfer
aditional to additional
adaptor to adapter
transactino to transaction

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/net/ethernet/altera/altera_sgdma.c    | 2 +-
 drivers/net/ethernet/altera/altera_tse_main.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/altera/altera_sgdma.c b/drivers/net/ethernet/altera/altera_sgdma.c
index db97170da8c7..7f247ccbe6ba 100644
--- a/drivers/net/ethernet/altera/altera_sgdma.c
+++ b/drivers/net/ethernet/altera/altera_sgdma.c
@@ -513,7 +513,7 @@ static int sgdma_txbusy(struct altera_tse_private *priv)
 {
 	int delay = 0;
 
-	/* if DMA is busy, wait for current transactino to finish */
+	/* if DMA is busy, wait for current transaction to finish */
 	while ((csrrd32(priv->tx_dma_csr, sgdma_csroffs(status))
 		& SGDMA_STSREG_BUSY) && (delay++ < 100))
 		udelay(1);
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 993b2fb42961..a3816264c35c 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -72,7 +72,7 @@ MODULE_PARM_DESC(dma_tx_num, "Number of descriptors in the TX list");
  */
 #define ALTERA_RXDMABUFFER_SIZE	2048
 
-/* Allow network stack to resume queueing packets after we've
+/* Allow network stack to resume queuing packets after we've
  * finished transmitting at least 1/4 of the packets in the queue.
  */
 #define TSE_TX_THRESH(x)	(x->tx_ring_size / 4)
@@ -390,7 +390,7 @@ static int tse_rx(struct altera_tse_private *priv, int limit)
 				   "RCV pktstatus %08X pktlength %08X\n",
 				   pktstatus, pktlength);
 
-		/* DMA trasfer from TSE starts with 2 aditional bytes for
+		/* DMA transfer from TSE starts with 2 additional bytes for
 		 * IP payload alignment. Status returned by get_rx_status()
 		 * contains DMA transfer length. Packet is 2 bytes shorter.
 		 */
@@ -1044,7 +1044,7 @@ static void altera_tse_set_mcfilterall(struct net_device *dev)
 		csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + i * 4);
 }
 
-/* Set or clear the multicast filter for this adaptor
+/* Set or clear the multicast filter for this adapter
  */
 static void tse_set_rx_mode_hashfilter(struct net_device *dev)
 {
@@ -1064,7 +1064,7 @@ static void tse_set_rx_mode_hashfilter(struct net_device *dev)
 	spin_unlock(&priv->mac_cfg_lock);
 }
 
-/* Set or clear the multicast filter for this adaptor
+/* Set or clear the multicast filter for this adapter
  */
 static void tse_set_rx_mode(struct net_device *dev)
 {
-- 
2.26.3


             reply	other threads:[~2022-02-15 21:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-15 21:38 trix [this message]
2022-02-17  4:40 ` [PATCH] net: ethernet: altera: cleanup comments patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220215213802.3043178-1-trix@redhat.com \
    --to=trix@redhat.com \
    --cc=davem@davemloft.net \
    --cc=joyce.ooi@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.