From: "Pali Rohár" <pali@kernel.org>
To: "Stefan Roese" <sr@denx.de>, "Marek Behún" <marek.behun@nic.cz>,
"Konstantin Porotchkin" <kostap@marvell.com>,
"Vladimir Vid" <vladimir.vid@sartura.hr>
Cc: u-boot@lists.denx.de
Subject: [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards
Date: Thu, 17 Feb 2022 10:26:16 +0100 [thread overview]
Message-ID: <20220217092619.1445-3-pali@kernel.org> (raw)
In-Reply-To: <20220217092619.1445-1-pali@kernel.org>
Allows to read OTP bits via U-Boot fuse command on all Armada 3720 boards.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
configs/mvebu_db-88f3720_defconfig | 2 ++
configs/mvebu_espressobin-88f3720_defconfig | 2 ++
configs/turris_mox_defconfig | 2 ++
configs/uDPU_defconfig | 2 ++
4 files changed, 8 insertions(+)
diff --git a/configs/mvebu_db-88f3720_defconfig b/configs/mvebu_db-88f3720_defconfig
index b600217692f1..6cc90fa54266 100644
--- a/configs/mvebu_db-88f3720_defconfig
+++ b/configs/mvebu_db-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3f0000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -24,6 +25,7 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 4b8206a38f1b..f8196eab82e5 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=1
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x3F0000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -26,6 +27,7 @@ CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/turris_mox_defconfig b/configs/turris_mox_defconfig
index 84a0b4c2b20e..25e417c94562 100644
--- a/configs/turris_mox_defconfig
+++ b/configs/turris_mox_defconfig
@@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_TURRIS_MOX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x180000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -31,6 +32,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_CMD_SHA1SUM=y
CONFIG_CMD_CLK=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
index b5f2115e6332..7698e080e2a2 100644
--- a/configs/uDPU_defconfig
+++ b/configs/uDPU_defconfig
@@ -4,6 +4,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_MVEBU_EFUSE=y
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x180000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -29,6 +30,7 @@ CONFIG_SYS_PROMPT="uDPU>> "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
--
2.20.1
next prev parent reply other threads:[~2022-02-17 9:27 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-17 9:26 [PATCH u-boot-mvebu 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 9:26 ` [PATCH u-boot-mvebu 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-17 14:10 ` Marek Behún
2022-02-17 9:26 ` Pali Rohár [this message]
2022-02-17 14:11 ` [PATCH u-boot-mvebu 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-17 14:11 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-17 14:16 ` Marek Behún
2022-02-17 17:13 ` Pali Rohár
2022-02-17 18:40 ` Marek Behún
2022-02-17 9:26 ` [PATCH u-boot-mvebu 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 14:31 ` Marek Behún
2022-02-17 16:50 ` Pali Rohár
2022-02-17 18:39 ` Marek Behún
2022-02-22 20:47 ` Pali Rohár
2022-02-23 14:50 ` Marek Behún
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-18 14:15 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-18 14:16 ` Stefan Roese
2022-02-17 18:50 ` [PATCH u-boot-mvebu v2 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-02-17 20:54 ` Marek Behún
2022-02-18 14:16 ` Stefan Roese
2022-02-22 20:51 ` Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 1/5] arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 2/5] arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 3/5] arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 4/5] arm: mvebu: a37xx: Extend mbox_do_cmd() code Pali Rohár
2022-02-23 13:15 ` [PATCH u-boot-mvebu v3 5/5] arm: mvebu: a37xx: Add support for reading Security OTP values Pali Rohár
2022-03-08 11:42 ` [PATCH u-boot-mvebu v3 0/5] arm: mvebu: a37xx: Add support for reading OTP Pali Rohár
2022-03-08 11:57 ` Stefan Roese
2022-04-20 18:22 ` Pali Rohár
2022-04-21 6:25 ` Stefan Roese
2022-04-21 14:03 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220217092619.1445-3-pali@kernel.org \
--to=pali@kernel.org \
--cc=kostap@marvell.com \
--cc=marek.behun@nic.cz \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=vladimir.vid@sartura.hr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.