All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: gustavo.pimentel@synopsys.com, hongxing.zhu@nxp.com,
	l.stach@pengutronix.de, linux-imx@nxp.com,
	linux-pci@vger.kernel.org, lznuaa@gmail.com
Cc: vkoul@kernel.org, lorenzo.pieralisi@arm.com, robh@kernel.org,
	kw@linux.com, bhelgaas@google.com, shawnguo@kernel.org,
	manivannan.sadhasivam@linaro.org
Subject: [PATCH v2 5/5] PCI: endpoint: functions/pci-epf-test: Support PCI controller DMA
Date: Thu,  3 Mar 2022 12:46:35 -0600	[thread overview]
Message-ID: <20220303184635.2603-5-Frank.Li@nxp.com> (raw)
In-Reply-To: <20220303184635.2603-1-Frank.Li@nxp.com>

Designware provided DMA support in controller. This enabled use
this DMA controller to transfer data.

The whole flow align with standard DMA usage module

1. Using dma_request_channel() and filter function to find correct
RX and TX Channel.
2. dmaengine_slave_config() config remote side physcial address.
3. using dmaengine_prep_slave_single() create transfer descriptor
4. tx_submit();
5. dma_async_issue_pending();

Tested at i.MX8DXL platform.

root@imx8qmmek:~# /usr/bin/pcitest -d -w
WRITE ( 102400 bytes):          OKAY
root@imx8qmmek:~# /usr/bin/pcitest -d -r
READ ( 102400 bytes):           OKAY

WRITE => Size: 102400 bytes DMA: YES  Time: 0.000180145 seconds Rate: 555108 KB/s
READ => Size: 102400 bytes  DMA: YES  Time: 0.000194397 seconds Rate: 514411 KB/s

READ => Size: 102400 bytes  DMA: NO   Time: 0.013532597 seconds Rate: 7389 KB/s
WRITE => Size: 102400 bytes DMA: NO   Time: 0.000857090 seconds Rate: 116673 KB/s

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v1 to v2
 - none

 drivers/pci/endpoint/functions/pci-epf-test.c | 106 ++++++++++++++++--
 1 file changed, 96 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 90d84d3bc868f..22ae420c30693 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -52,9 +52,11 @@ struct pci_epf_test {
 	enum pci_barno		test_reg_bar;
 	size_t			msix_table_offset;
 	struct delayed_work	cmd_handler;
-	struct dma_chan		*dma_chan;
+	struct dma_chan		*dma_chan_tx;
+	struct dma_chan		*dma_chan_rx;
 	struct completion	transfer_complete;
 	bool			dma_supported;
+	bool			dma_private;
 	const struct pci_epc_features *epc_features;
 };
 
@@ -105,14 +107,17 @@ static void pci_epf_test_dma_callback(void *param)
  */
 static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 				      dma_addr_t dma_dst, dma_addr_t dma_src,
-				      size_t len)
+				      size_t len, dma_addr_t remote,
+				      enum dma_transfer_direction dir)
 {
 	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
-	struct dma_chan *chan = epf_test->dma_chan;
+	struct dma_chan *chan = (dir == DMA_DEV_TO_MEM) ? epf_test->dma_chan_tx : epf_test->dma_chan_rx;
 	struct pci_epf *epf = epf_test->epf;
 	struct dma_async_tx_descriptor *tx;
 	struct device *dev = &epf->dev;
 	dma_cookie_t cookie;
+	struct dma_slave_config	sconf;
+	dma_addr_t local = (dir == DMA_MEM_TO_DEV) ? dma_src : dma_dst;
 	int ret;
 
 	if (IS_ERR_OR_NULL(chan)) {
@@ -120,7 +125,20 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 		return -EINVAL;
 	}
 
-	tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
+	if (epf_test->dma_private) {
+		memset(&sconf, 0, sizeof(sconf));
+		sconf.direction = dir;
+		if (dir == DMA_MEM_TO_DEV)
+			sconf.dst_addr = remote;
+		else
+			sconf.src_addr = remote;
+
+		dmaengine_slave_config(chan, &sconf);
+		tx = dmaengine_prep_slave_single(chan, local, len, dir, flags);
+	} else {
+		tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
+	}
+
 	if (!tx) {
 		dev_err(dev, "Failed to prepare DMA memcpy\n");
 		return -EIO;
@@ -148,6 +166,23 @@ static int pci_epf_test_data_transfer(struct pci_epf_test *epf_test,
 	return 0;
 }
 
+struct epf_dma_filter {
+	struct device *dev;
+	u32 dma_mask;
+};
+
+static bool epf_dma_filter_fn(struct dma_chan *chan, void *node)
+{
+	struct epf_dma_filter *filter = node;
+	struct dma_slave_caps caps;
+
+	memset(&caps, 0, sizeof(caps));
+	dma_get_slave_caps(chan, &caps);
+
+	return chan->device->dev == filter->dev
+		&& (filter->dma_mask & caps.directions);
+}
+
 /**
  * pci_epf_test_init_dma_chan() - Function to initialize EPF test DMA channel
  * @epf_test: the EPF test device that performs data transfer operation
@@ -160,8 +195,42 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
 	struct device *dev = &epf->dev;
 	struct dma_chan *dma_chan;
 	dma_cap_mask_t mask;
+	struct epf_dma_filter filter;
 	int ret;
 
+	filter.dev = epf->epc->dev.parent;
+	filter.dma_mask = BIT(DMA_DEV_TO_MEM);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
+	if (IS_ERR(dma_chan)) {
+		dev_info(dev, "Failure get built-in DMA channel, fail back to try allocate general DMA channel\n");
+		goto fail_back_tx;
+	}
+
+	epf_test->dma_chan_rx = dma_chan;
+
+	filter.dma_mask = BIT(DMA_MEM_TO_DEV);
+	dma_chan = dma_request_channel(mask, epf_dma_filter_fn, &filter);
+
+	if (IS_ERR(dma_chan)) {
+		dev_info(dev, "Failure get built-in DMA channel, fail back to try allocate general DMA channel\n");
+		goto fail_back_rx;
+	}
+
+	epf_test->dma_chan_tx = dma_chan;
+	epf_test->dma_private = true;
+
+	init_completion(&epf_test->transfer_complete);
+
+	return 0;
+
+fail_back_rx:
+	dma_release_channel(epf_test->dma_chan_rx);
+	epf_test->dma_chan_tx = NULL;
+
+fail_back_tx:
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_MEMCPY, mask);
 
@@ -174,7 +243,7 @@ static int pci_epf_test_init_dma_chan(struct pci_epf_test *epf_test)
 	}
 	init_completion(&epf_test->transfer_complete);
 
-	epf_test->dma_chan = dma_chan;
+	epf_test->dma_chan_tx = epf_test->dma_chan_rx = dma_chan;
 
 	return 0;
 }
@@ -190,8 +259,17 @@ static void pci_epf_test_clean_dma_chan(struct pci_epf_test *epf_test)
 	if (!epf_test->dma_supported)
 		return;
 
-	dma_release_channel(epf_test->dma_chan);
-	epf_test->dma_chan = NULL;
+	dma_release_channel(epf_test->dma_chan_tx);
+	if (epf_test->dma_chan_tx == epf_test->dma_chan_rx) {
+		epf_test->dma_chan_tx = NULL;
+		epf_test->dma_chan_rx = NULL;
+		return;
+	}
+
+	dma_release_channel(epf_test->dma_chan_rx);
+	epf_test->dma_chan_rx = NULL;
+
+	return;
 }
 
 static void pci_epf_test_print_rate(const char *ops, u64 size,
@@ -280,8 +358,14 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 			goto err_map_addr;
 		}
 
+		if (epf_test->dma_private) {
+			dev_err(dev, "Cannot transfer data using DMA\n");
+			ret = -EINVAL;
+			goto err_map_addr;
+		}
+
 		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
-						 src_phys_addr, reg->size);
+						 src_phys_addr, reg->size, 0, DMA_MEM_TO_MEM);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 	} else {
@@ -363,7 +447,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
 
 		ktime_get_ts64(&start);
 		ret = pci_epf_test_data_transfer(epf_test, dst_phys_addr,
-						 phys_addr, reg->size);
+						 phys_addr, reg->size,
+						 reg->src_addr, DMA_DEV_TO_MEM);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 		ktime_get_ts64(&end);
@@ -453,8 +538,9 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
 		}
 
 		ktime_get_ts64(&start);
+
 		ret = pci_epf_test_data_transfer(epf_test, phys_addr,
-						 src_phys_addr, reg->size);
+						 src_phys_addr, reg->size, reg->dst_addr, DMA_MEM_TO_DEV);
 		if (ret)
 			dev_err(dev, "Data transfer failed\n");
 		ktime_get_ts64(&end);
-- 
2.24.0.rc1


  parent reply	other threads:[~2022-03-03 18:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 18:46 [PATCH v2 1/5] dmaengine: dw-edma: fix dw_edma_probe() can't be call globally Frank Li
2022-03-03 18:46 ` [PATCH v2 2/5] dmaengine: dw-edma-pcie: don't touch internal struct dw_edma Frank Li
2022-03-03 18:46 ` [PATCH v2 3/5] dmaengine: dw-edma: add flags at struct dw_edma_chip Frank Li
2022-03-04 16:19   ` Manivannan Sadhasivam
2022-03-04 17:16     ` Zhi Li
2022-03-07 13:59       ` Manivannan Sadhasivam
2022-03-04 21:31   ` Bjorn Helgaas
2022-03-03 18:46 ` [PATCH v2 4/5] PCI: imx6: add PCIe embedded DMA support Frank Li
2022-03-04 21:33   ` Bjorn Helgaas
2022-03-05  1:31     ` Zhi Li
2022-03-09 12:01   ` Manivannan Sadhasivam
2022-03-09 18:31     ` Zhi Li
2022-03-09 18:42       ` Manivannan Sadhasivam
2022-03-09 19:14         ` Zhi Li
2022-03-09 20:48           ` Zhi Li
2022-03-10  4:45           ` Manivannan Sadhasivam
2022-03-03 18:46 ` Frank Li [this message]
2022-03-10 22:07 ` [PATCH v2 1/5] dmaengine: dw-edma: fix dw_edma_probe() can't be call globally Zhi Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220303184635.2603-5-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lznuaa@gmail.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.