From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [PULL 01/50] crypto: perform permission checks under BQL
Date: Fri, 4 Mar 2022 17:46:22 +0100 [thread overview]
Message-ID: <20220304164711.474713-2-kwolf@redhat.com> (raw)
In-Reply-To: <20220304164711.474713-1-kwolf@redhat.com>
From: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/block_int.h | 14 ++++++++++++++
block/amend.c | 25 +++++++++++++++++++++++++
block/crypto.c | 33 +++++++++++++++++++++++++++++++++
tests/qemu-iotests/296 | 8 ++++++--
tests/qemu-iotests/296.out | 17 +++++------------
5 files changed, 83 insertions(+), 14 deletions(-)
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 27008cfb22..31bd788919 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -124,6 +124,20 @@ struct BlockDriver {
* on those children.
*/
bool is_format;
+
+ /*
+ * This function is invoked under BQL before .bdrv_co_amend()
+ * (which in contrast does not necessarily run under the BQL)
+ * to allow driver-specific initialization code that requires
+ * the BQL, like setting up specific permission flags.
+ */
+ int (*bdrv_amend_pre_run)(BlockDriverState *bs, Error **errp);
+ /*
+ * This function is invoked under BQL after .bdrv_co_amend()
+ * to allow cleaning up what was done in .bdrv_amend_pre_run().
+ */
+ void (*bdrv_amend_clean)(BlockDriverState *bs);
+
/*
* Return true if @to_replace can be replaced by a BDS with the
* same data as @bs without it affecting @bs's behavior (that is,
diff --git a/block/amend.c b/block/amend.c
index 392df9ef83..f465738665 100644
--- a/block/amend.c
+++ b/block/amend.c
@@ -53,10 +53,29 @@ static int coroutine_fn blockdev_amend_run(Job *job, Error **errp)
return ret;
}
+static int blockdev_amend_pre_run(BlockdevAmendJob *s, Error **errp)
+{
+ if (s->bs->drv->bdrv_amend_pre_run) {
+ return s->bs->drv->bdrv_amend_pre_run(s->bs, errp);
+ }
+
+ return 0;
+}
+
+static void blockdev_amend_clean(Job *job)
+{
+ BlockdevAmendJob *s = container_of(job, BlockdevAmendJob, common);
+
+ if (s->bs->drv->bdrv_amend_clean) {
+ s->bs->drv->bdrv_amend_clean(s->bs);
+ }
+}
+
static const JobDriver blockdev_amend_job_driver = {
.instance_size = sizeof(BlockdevAmendJob),
.job_type = JOB_TYPE_AMEND,
.run = blockdev_amend_run,
+ .clean = blockdev_amend_clean,
};
void qmp_x_blockdev_amend(const char *job_id,
@@ -113,5 +132,11 @@ void qmp_x_blockdev_amend(const char *job_id,
s->bs = bs,
s->opts = QAPI_CLONE(BlockdevAmendOptions, options),
s->force = has_force ? force : false;
+
+ if (blockdev_amend_pre_run(s, errp)) {
+ job_early_fail(&s->common);
+ return;
+ }
+
job_start(&s->common);
}
diff --git a/block/crypto.c b/block/crypto.c
index c8ba4681e2..70b2f07351 100644
--- a/block/crypto.c
+++ b/block/crypto.c
@@ -777,6 +777,37 @@ block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
return spec_info;
}
+static int
+block_crypto_amend_prepare(BlockDriverState *bs, Error **errp)
+{
+ BlockCrypto *crypto = bs->opaque;
+ int ret;
+
+ /* apply for exclusive read/write permissions to the underlying file */
+ crypto->updating_keys = true;
+ ret = bdrv_child_refresh_perms(bs, bs->file, errp);
+ if (ret < 0) {
+ /* Well, in this case we will not be updating any keys */
+ crypto->updating_keys = false;
+ }
+ return ret;
+}
+
+static void
+block_crypto_amend_cleanup(BlockDriverState *bs)
+{
+ BlockCrypto *crypto = bs->opaque;
+ Error *errp = NULL;
+
+ /* release exclusive read/write permissions to the underlying file */
+ crypto->updating_keys = false;
+ bdrv_child_refresh_perms(bs, bs->file, &errp);
+
+ if (errp) {
+ error_report_err(errp);
+ }
+}
+
static int
block_crypto_amend_options_generic_luks(BlockDriverState *bs,
QCryptoBlockAmendOptions *amend_options,
@@ -931,6 +962,8 @@ static BlockDriver bdrv_crypto_luks = {
.bdrv_get_specific_info = block_crypto_get_specific_info_luks,
.bdrv_amend_options = block_crypto_amend_options_luks,
.bdrv_co_amend = block_crypto_co_amend_luks,
+ .bdrv_amend_pre_run = block_crypto_amend_prepare,
+ .bdrv_amend_clean = block_crypto_amend_cleanup,
.is_format = true,
diff --git a/tests/qemu-iotests/296 b/tests/qemu-iotests/296
index 099a3eeaa5..f80ef3434a 100755
--- a/tests/qemu-iotests/296
+++ b/tests/qemu-iotests/296
@@ -174,8 +174,12 @@ class EncryptionSetupTestCase(iotests.QMPTestCase):
}
result = vm.qmp('x-blockdev-amend', **args)
- assert result['return'] == {}
- vm.run_job('job0')
+ iotests.log(result)
+ # Run the job only if it was created
+ event = ('JOB_STATUS_CHANGE',
+ {'data': {'id': 'job0', 'status': 'created'}})
+ if vm.events_wait([event], timeout=0.0) is not None:
+ vm.run_job('job0')
# test that when the image opened by two qemu processes,
# neither of them can update the encryption keys
diff --git a/tests/qemu-iotests/296.out b/tests/qemu-iotests/296.out
index 42205cc981..609826eaa0 100644
--- a/tests/qemu-iotests/296.out
+++ b/tests/qemu-iotests/296.out
@@ -1,11 +1,9 @@
-{"execute": "job-dismiss", "arguments": {"id": "job0"}}
{"return": {}}
-Job failed: Failed to get shared "consistent read" lock
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
{"return": {}}
-Job failed: Failed to get shared "consistent read" lock
-{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"error": {"class": "GenericError", "desc": "Failed to get shared \"consistent read\" lock"}}
+{"error": {"class": "GenericError", "desc": "Failed to get shared \"consistent read\" lock"}}
{"return": {}}
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
{"return": {}}
@@ -13,14 +11,9 @@ qemu-img: Failed to get shared "consistent read" lock
Is another process using the image [TEST_DIR/test.img]?
.
-Job failed: Block node is read-only
-{"execute": "job-dismiss", "arguments": {"id": "job0"}}
-{"return": {}}
-Job failed: Failed to get shared "consistent read" lock
-{"execute": "job-dismiss", "arguments": {"id": "job0"}}
-{"return": {}}
-Job failed: Failed to get shared "consistent read" lock
-{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"error": {"class": "GenericError", "desc": "Block node is read-only"}}
+{"error": {"class": "GenericError", "desc": "Failed to get shared \"consistent read\" lock"}}
+{"error": {"class": "GenericError", "desc": "Failed to get shared \"consistent read\" lock"}}
{"return": {}}
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
{"return": {}}
--
2.35.1
next prev parent reply other threads:[~2022-03-04 16:49 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 16:46 [PULL 00/50] Block layer patches Kevin Wolf
2022-03-04 16:46 ` Kevin Wolf [this message]
2022-03-04 16:46 ` [PULL 02/50] crypto: distinguish between main loop and I/O in block_crypto_amend_options_generic_luks Kevin Wolf
2022-03-04 16:46 ` [PULL 03/50] block: introduce bdrv_activate Kevin Wolf
2022-03-04 16:46 ` [PULL 04/50] block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and test_sync_op_invalidate_cache Kevin Wolf
2022-03-04 16:46 ` [PULL 05/50] block: move BQL logic of bdrv_co_invalidate_cache in bdrv_activate Kevin Wolf
2022-03-04 16:46 ` [PULL 06/50] tls: add macros for coroutine-safe TLS variables Kevin Wolf
2022-03-04 16:46 ` [PULL 07/50] util/async: replace __thread with QEMU TLS macros Kevin Wolf
2022-03-04 16:46 ` [PULL 08/50] rcu: use coroutine " Kevin Wolf
2022-03-04 16:46 ` [PULL 09/50] cpus: use coroutine TLS macros for iothread_locked Kevin Wolf
2022-03-04 16:46 ` [PULL 10/50] os-posix: Add os_set_daemonize() Kevin Wolf
2022-03-04 16:46 ` [PULL 11/50] qsd: Add pre-init argument parsing pass Kevin Wolf
2022-03-04 16:46 ` [PULL 12/50] qsd: Add --daemonize Kevin Wolf
2022-03-04 16:46 ` [PULL 13/50] iotests/185: Add post-READY quit tests Kevin Wolf
2022-03-04 16:46 ` [PULL 14/50] main-loop.h: introduce qemu_in_main_thread() Kevin Wolf
2022-03-04 16:46 ` [PULL 15/50] main loop: macros to mark GS and I/O functions Kevin Wolf
2022-03-04 16:46 ` [PULL 16/50] include/block/block: split header into I/O and global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 17/50] assertions for block " Kevin Wolf
2022-03-04 16:46 ` [PULL 18/50] IO_CODE and IO_OR_GS_CODE for block I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 19/50] block/export/fuse.c: allow writable exports to take RESIZE permission Kevin Wolf
2022-03-04 16:46 ` [PULL 20/50] include/sysemu/block-backend: split header into I/O and global state (GS) API Kevin Wolf
2022-03-04 16:46 ` [PULL 21/50] block/block-backend.c: assertions for block-backend Kevin Wolf
2022-03-16 12:44 ` Philippe Mathieu-Daudé
2022-03-16 12:53 ` Philippe Mathieu-Daudé
2022-03-16 14:46 ` Emanuele Giuseppe Esposito
2022-03-16 15:25 ` Philippe Mathieu-Daudé
2022-03-16 16:02 ` Kevin Wolf
2022-03-16 12:54 ` Emanuele Giuseppe Esposito
2022-03-04 16:46 ` [PULL 22/50] IO_CODE and IO_OR_GS_CODE for block-backend I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 23/50] block.c: assertions to the block layer permissions API Kevin Wolf
2022-03-04 16:46 ` [PULL 24/50] include/block/block_int: split header into I/O and global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 25/50] assertions for block_int " Kevin Wolf
2022-03-04 16:46 ` [PULL 26/50] IO_CODE and IO_OR_GS_CODE for block_int I/O API Kevin Wolf
2022-03-04 16:46 ` [PULL 27/50] block: introduce assert_bdrv_graph_writable Kevin Wolf
2022-03-04 16:46 ` [PULL 28/50] include/block/blockjob_int.h: split header into I/O and GS API Kevin Wolf
2022-03-04 16:46 ` [PULL 29/50] GS and IO CODE macros for blockjob_int.h Kevin Wolf
2022-03-04 16:46 ` [PULL 30/50] block.c: add assertions to static functions Kevin Wolf
2022-03-04 16:46 ` [PULL 31/50] include/block/blockjob.h: global state API Kevin Wolf
2022-03-04 16:46 ` [PULL 32/50] assertions for blockjob.h " Kevin Wolf
2022-03-04 16:46 ` [PULL 33/50] include/sysemu/blockdev.h: " Kevin Wolf
2022-03-04 16:46 ` [PULL 34/50] assertions for blockdev.h " Kevin Wolf
2022-03-04 16:46 ` [PULL 35/50] include/block/snapshot: global state API + assertions Kevin Wolf
2022-03-04 16:46 ` [PULL 36/50] block/copy-before-write.h: " Kevin Wolf
2022-03-04 16:46 ` [PULL 37/50] block/coroutines: I/O and "I/O or GS" API Kevin Wolf
2022-03-04 16:46 ` [PULL 38/50] block_int-common.h: split function pointers in BlockDriver Kevin Wolf
2022-03-04 16:47 ` [PULL 39/50] block_int-common.h: assertions in the callers of BlockDriver function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 40/50] block_int-common.h: split function pointers in BdrvChildClass Kevin Wolf
2022-03-04 16:47 ` [PULL 41/50] block_int-common.h: assertions in the callers of BdrvChildClass function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 42/50] block-backend-common.h: split function pointers in BlockDevOps Kevin Wolf
2022-03-04 16:47 ` [PULL 43/50] job.h: split function pointers in JobDriver Kevin Wolf
2022-03-04 16:47 ` [PULL 44/50] job.h: assertions in the callers of JobDriver function pointers Kevin Wolf
2022-03-04 16:47 ` [PULL 45/50] block: Make bdrv_refresh_limits() non-recursive Kevin Wolf
2022-03-04 16:47 ` [PULL 46/50] iotests: Allow using QMP with the QSD Kevin Wolf
2022-03-04 16:47 ` [PULL 47/50] iotests/graph-changes-while-io: New test Kevin Wolf
2022-03-04 16:47 ` [PULL 48/50] tests/qemu-iotests: Rework the checks and spots using GNU sed Kevin Wolf
2022-03-04 16:47 ` [PULL 49/50] block/amend: Always call .bdrv_amend_clean() Kevin Wolf
2022-03-04 16:47 ` [PULL 50/50] block/amend: Keep strong reference to BDS Kevin Wolf
2022-03-05 14:43 ` [PULL 00/50] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220304164711.474713-2-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.