From: Roger Pau Monne <roger.pau@citrix.com>
To: <xen-devel@lists.xenproject.org>
Cc: Roger Pau Monne <roger.pau@citrix.com>,
Jan Beulich <jbeulich@suse.com>,
Alex Olson <this.is.a0lson@gmail.com>
Subject: [PATCH v4] vpci/msix: fix PBA accesses
Date: Mon, 7 Mar 2022 17:37:44 +0100 [thread overview]
Message-ID: <20220307163744.74030-1-roger.pau@citrix.com> (raw)
Map the PBA in order to access it from the MSI-X read and write
handlers. Note that previously the handlers would pass the physical
host address into the {read,write}{l,q} handlers, which is wrong as
those expect a linear address.
Map the PBA using ioremap when the first access is performed. Note
that 32bit arches might want to abstract the call to ioremap into a
vPCI arch handler, so they can use a fixmap range to map the PBA.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
---
Cc: Alex Olson <this.is.a0lson@gmail.com>
---
Changes since v3:
- Use {read,write}_atomic for accessing msix pba field.
- Shrink locked section.
- Constify pba.
Changes since v2:
- Use helper function to map PBA.
- Mark memory as iomem.
Changes since v1:
- Also handle writes.
I don't seem to have a box with a driver that will try to access the
PBA, so I would consider this specific code path only build tested. At
least it doesn't seem to regress the current state of vPCI.
---
xen/drivers/vpci/msix.c | 64 ++++++++++++++++++++++++++++++++++++++---
xen/drivers/vpci/vpci.c | 2 ++
xen/include/xen/vpci.h | 2 ++
3 files changed, 64 insertions(+), 4 deletions(-)
diff --git a/xen/drivers/vpci/msix.c b/xen/drivers/vpci/msix.c
index a1fa7a5f13..63f162cf5a 100644
--- a/xen/drivers/vpci/msix.c
+++ b/xen/drivers/vpci/msix.c
@@ -182,6 +182,38 @@ static struct vpci_msix_entry *get_entry(struct vpci_msix *msix,
return &msix->entries[(addr - start) / PCI_MSIX_ENTRY_SIZE];
}
+static void __iomem *get_pba(struct vpci *vpci)
+{
+ struct vpci_msix *msix = vpci->msix;
+ /*
+ * PBA will only be unmapped when the device is deassigned, so access it
+ * without holding the vpci lock.
+ */
+ void __iomem *pba = read_atomic(&msix->pba);
+
+ if ( likely(pba) )
+ return pba;
+
+ pba = ioremap(vmsix_table_addr(vpci, VPCI_MSIX_PBA),
+ vmsix_table_size(vpci, VPCI_MSIX_PBA));
+ if ( !pba )
+ return read_atomic(&msix->pba);
+
+ spin_lock(&vpci->lock);
+ if ( !msix->pba )
+ {
+ write_atomic(&msix->pba, pba);
+ spin_unlock(&vpci->lock);
+ }
+ else
+ {
+ spin_unlock(&vpci->lock);
+ iounmap(pba);
+ }
+
+ return read_atomic(&msix->pba);
+}
+
static int cf_check msix_read(
struct vcpu *v, unsigned long addr, unsigned int len, unsigned long *data)
{
@@ -200,6 +232,10 @@ static int cf_check msix_read(
if ( VMSIX_ADDR_IN_RANGE(addr, msix->pdev->vpci, VPCI_MSIX_PBA) )
{
+ struct vpci *vpci = msix->pdev->vpci;
+ unsigned int idx = addr - vmsix_table_addr(vpci, VPCI_MSIX_PBA);
+ const void __iomem *pba = get_pba(vpci);
+
/*
* Access to PBA.
*
@@ -207,14 +243,22 @@ static int cf_check msix_read(
* guest address space. If this changes the address will need to be
* translated.
*/
+ if ( !pba )
+ {
+ gprintk(XENLOG_WARNING,
+ "%pp: unable to map MSI-X PBA, report all pending\n",
+ msix->pdev);
+ return X86EMUL_OKAY;
+ }
+
switch ( len )
{
case 4:
- *data = readl(addr);
+ *data = readl(pba + idx);
break;
case 8:
- *data = readq(addr);
+ *data = readq(pba + idx);
break;
default:
@@ -275,19 +319,31 @@ static int cf_check msix_write(
if ( VMSIX_ADDR_IN_RANGE(addr, msix->pdev->vpci, VPCI_MSIX_PBA) )
{
+ struct vpci *vpci = msix->pdev->vpci;
+ unsigned int idx = addr - vmsix_table_addr(vpci, VPCI_MSIX_PBA);
+ const void __iomem *pba = get_pba(vpci);
if ( !is_hardware_domain(d) )
/* Ignore writes to PBA for DomUs, it's behavior is undefined. */
return X86EMUL_OKAY;
+ if ( !pba )
+ {
+ /* Unable to map the PBA, ignore write. */
+ gprintk(XENLOG_WARNING,
+ "%pp: unable to map MSI-X PBA, write ignored\n",
+ msix->pdev);
+ return X86EMUL_OKAY;
+ }
+
switch ( len )
{
case 4:
- writel(data, addr);
+ writel(data, pba + idx);
break;
case 8:
- writeq(data, addr);
+ writeq(data, pba + idx);
break;
default:
diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
index f3b32d66cb..9fb3c05b2b 100644
--- a/xen/drivers/vpci/vpci.c
+++ b/xen/drivers/vpci/vpci.c
@@ -51,6 +51,8 @@ void vpci_remove_device(struct pci_dev *pdev)
xfree(r);
}
spin_unlock(&pdev->vpci->lock);
+ if ( pdev->vpci->msix && pdev->vpci->msix->pba )
+ iounmap(pdev->vpci->msix->pba);
xfree(pdev->vpci->msix);
xfree(pdev->vpci->msi);
xfree(pdev->vpci);
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index bcad1516ae..67c9a0c631 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -127,6 +127,8 @@ struct vpci {
bool enabled : 1;
/* Masked? */
bool masked : 1;
+ /* PBA map */
+ void __iomem *pba;
/* Entries. */
struct vpci_msix_entry {
uint64_t addr;
--
2.34.1
next reply other threads:[~2022-03-07 16:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-07 16:37 Roger Pau Monne [this message]
2022-03-08 8:31 ` [PATCH v4] vpci/msix: fix PBA accesses Jan Beulich
2022-03-08 9:05 ` Roger Pau Monné
2022-03-08 10:46 ` Jan Beulich
2022-03-08 12:37 ` Roger Pau Monné
2022-03-08 18:19 ` Alex Olson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220307163744.74030-1-roger.pau@citrix.com \
--to=roger.pau@citrix.com \
--cc=jbeulich@suse.com \
--cc=this.is.a0lson@gmail.com \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.