From: Denys Dmytriyenko <denis@denix.org>
To: Jon Mason <jdmason@kudzu.us>
Cc: meta-arm@lists.yoctoproject.org, Sumit Garg <sumit.garg@linaro.org>
Subject: Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
Date: Tue, 22 Mar 2022 15:27:50 -0400 [thread overview]
Message-ID: <20220322192750.GM23554@denix.org> (raw)
In-Reply-To: <CAPoiz9y0MxwurDc0_mHV5_J6knjUW0AAsuyztggvuj_nFsY5cg@mail.gmail.com>
On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> After a minor change and using -M25%
Thanks! The patch is obviously malformed as it was sent as a reply, but
otherwise looks good to me.
Feel free to add to the real patch:
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
> diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> index 838342a1c572..394ce4131b9f 100755
> --- a/ci/get-binary-toolchains
> +++ b/ci/get-binary-toolchains
> @@ -2,7 +2,7 @@
> set -u
>
> HOST_ARCH=$(uname -m)
> -VER="10.3-2021.07"
> +VER="11.2-2022.02"
>
> DOWNLOAD_DIR=$1
> TOOLCHAIN_DIR=$2
> @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> #AArch64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-none-linux-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> +
> + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> elif [ $HOST_ARCH = "x86_64" ]; then
> #x86_64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-linux-none-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
>
> #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
>
> #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> else
> echo "ERROR - Unknown build arch of $HOST_ARCH"
> exit 1
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> similarity index 61%
> rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> index 02b5b43bdd7e..a9e6b581a50e 100644
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
>
> LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> -LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> -LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> +LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
>
> -PROVIDES = "virtual/aarch64-none-elf-gcc"
> +PROVIDES = "virtual/${BINNAME}-gcc"
>
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> -SRC_URI[gnu-a-aarch64.sha256sum] =
> "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> -SRC_URI[gnu-a-x86_64.sha256sum] =
> "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> +SRC_URI[gnu-a-aarch64.sha256sum] =
> "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> +SRC_URI[gnu-a-x86_64.sha256sum] =
> "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
>
> S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
>
> -UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> +UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> similarity index 35%
> rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> index ad7e81617d74..930bb5261be8 100644
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
>
> -LIC_FILES_CHKSUM =
> "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> +LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
>
> -PROVIDES = "virtual/arm-none-eabi-gcc"
> +PROVIDES = "virtual/${BINNAME}-gcc"
>
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> -SRC_URI[gnu-rm-aarch64.sha256sum] =
> "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> -SRC_URI[gnu-rm-x86_64.sha256sum] =
> "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> +SRC_URI[gnu-rm-aarch64.sha256sum] =
> "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> +SRC_URI[gnu-rm-x86_64.sha256sum] =
> "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
>
> -UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> +
> +UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> >
> > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > There is a new and unified version of the toolchains (no longer the RM
> > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > location.
> > >
> > > NOTE: with this change, the binary toolchains do not appear to work
> > >
> > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > ---
> > > ci/get-binary-toolchains | 13 ++++++----
> > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> >
> > Any chance to lower the similarity threshold to make it a diff for review,
> > instead of remove/add?
> >
> >
> > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > index 838342a1c572..394ce4131b9f 100755
> > > --- a/ci/get-binary-toolchains
> > > +++ b/ci/get-binary-toolchains
> > > @@ -2,7 +2,7 @@
> > > set -u
> > >
> > > HOST_ARCH=$(uname -m)
> > > -VER="10.3-2021.07"
> > > +VER="11.2-2022.02"
> > >
> > > DOWNLOAD_DIR=$1
> > > TOOLCHAIN_DIR=$2
> > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > #AArch64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > +
> > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > #x86_64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > else
> > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > exit 1
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > similarity index 61%
> > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > >
> > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > >
> > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > >
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > >
> > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > >
> > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > deleted file mode 100644
> > > index ad7e81617d74..000000000000
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > +++ /dev/null
> > > @@ -1,20 +0,0 @@
> > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > -
> > > -require arm-binary-toolchain.inc
> > > -
> > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > -
> > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > -
> > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > -
> > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > -
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > -
> > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > new file mode 100644
> > > index 000000000000..4e9fe35789f9
> > > --- /dev/null
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > @@ -0,0 +1,24 @@
> > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > +
> > > +require arm-binary-toolchain.inc
> > > +
> > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > +
> > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > +
> > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > +
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > +
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > +
> > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > +
> > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > --
> > > 2.30.2
> > >
> >
> > --
> > Regards,
> > Denys Dmytriyenko <denis@denix.org>
> > PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
> > Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
>
--
Regards,
Denys Dmytriyenko <denis@denix.org>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
next prev parent reply other threads:[~2022-03-22 19:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-22 13:43 [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02 Jon Mason
2022-03-22 17:30 ` [meta-arm] " Denys Dmytriyenko
2022-03-22 19:20 ` Jon Mason
2022-03-22 19:27 ` Denys Dmytriyenko [this message]
2022-03-22 21:08 ` Jon Mason
2022-03-30 20:15 ` Denys Dmytriyenko
2022-04-04 13:44 ` Sumit Garg
2022-04-07 15:34 ` Jon Mason
2022-04-28 12:36 ` Sumit Garg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220322192750.GM23554@denix.org \
--to=denis@denix.org \
--cc=jdmason@kudzu.us \
--cc=meta-arm@lists.yoctoproject.org \
--cc=sumit.garg@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.