From: Teng Long <dyroneteng@gmail.com>
To: me@ttaylorr.com
Cc: avarab@gmail.com, derrickstolee@github.com, dyroneteng@gmail.com,
git@vger.kernel.org, tenglong.tl@alibaba-inc.com
Subject: Re: [PATCH v1 2/3] pack-bitmap.c: add "break" statement in "open_pack_bitmap()"
Date: Tue, 29 Mar 2022 10:49:49 +0800 [thread overview]
Message-ID: <20220329024949.62091-1-dyroneteng@gmail.com> (raw)
In-Reply-To: <YjzAbSJfuu06smnD@nand.local>
On Thu, 24 Mar 2022 15:03:09 -0400, Taylor Blau wrote:
> The lack of a break here is intentional, I think, since having more than
> one bitmap of the same kind in a repository is an error.
Yeah. I quite sure that it's intentional now.
Thanks for your explanations.
> (This is behavior we inherited from the pre-MIDX bitmap days, when
> having more than one pack bitmap caused Git to signal an error, since it
> could only use the results from a single bitmap).
>
> You can see in pack-bitmap.c::open_pack_bitmap_1() that we have a
> condition saying:
>
> if (bitmap_git->pack || bitmap_git->midx) {
> /* ignore extra bitmap file; we can only handle one */
> warning("...")
> close(fd;)
> return -1;
> }
>
> We do want to call that open_pack_bitmap_1() function on every pack we
> know about to make sure that one and only one of them corresponds to a
> .bitmap.
Yeah, the condition and "warning" make it clear to me which is if already
exists a bitmap of the pack or MIDX is ready, we will give warnings and just
let it fail (return -1 means a return of NULL in "prepare_bitmap_git()", and
will then die() in usage cases I found).
In addition of above, I had a question that why we need "bitmap_git->midx"
in the condition? Because here in "open_pack_bitmap_1()" we intent to open the
non-midx-bitmap and it's after we deal with "open_midx_bitmap()" in "open_bitmap()":
static int open_bitmap(struct repository *r,
struct bitmap_index *bitmap_git)
{
assert(!bitmap_git->map);
if (!open_midx_bitmap(r, bitmap_git))
return 0;
return open_pack_bitmap(r, bitmap_git);
}
So if I understood correct, maybe we can made condition of "bitmap_git->midx" a little
earlier so that we can avoid to open every packfile, maybe it's like:
diff --git a/pack-bitmap.c b/pack-bitmap.c
index 9c666cdb8b..38f53b8f1c 100644
--- a/pack-bitmap.c
+++ b/pack-bitmap.c
@@ -483,11 +483,12 @@ static int open_pack_bitmap(struct repository *r,
assert(!bitmap_git->map);
- for (p = get_all_packs(r); p; p = p->next) {
- if (open_pack_bitmap_1(bitmap_git, p) == 0)
- ret = 0;
+ if (!bitmap_git->midx) {
+ for (p = get_all_packs(r); p; p = p->next) {
+ if (open_pack_bitmap_1(bitmap_git, p) == 0)
+ ret = 0;
+ }
}
-
return ret;
}
Thanks.
next prev parent reply other threads:[~2022-03-29 2:49 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-24 11:43 [PATCH v1 0/3] trace2 output for bitmap decision path Teng Long
2022-03-24 11:43 ` [PATCH v1 1/3] pack-bitmap.c: use "ret" in "open_midx_bitmap()" Teng Long
2022-03-24 19:11 ` Taylor Blau
2022-03-28 7:59 ` [PATCH v1 1/3] pack-bitmap.c: use "ret" in "open_midx_bitmap() Teng Long
2022-03-30 2:39 ` Taylor Blau
2022-03-24 11:44 ` [PATCH v1 2/3] pack-bitmap.c: add "break" statement in "open_pack_bitmap()" Teng Long
2022-03-24 18:40 ` Junio C Hamano
2022-03-24 19:06 ` Taylor Blau
2022-03-24 19:03 ` Taylor Blau
2022-03-29 2:49 ` Teng Long [this message]
2022-03-30 2:55 ` Taylor Blau
2022-03-30 7:32 ` Teng Long Teng Long
2022-03-30 13:17 ` Ævar Arnfjörð Bjarmason
2022-03-24 11:44 ` [PATCH v1 3/3] bitmap: add trace outputs during open "bitmap" file Teng Long
2022-03-24 18:42 ` Junio C Hamano
2022-03-24 13:22 ` [PATCH v1 0/3] trace2 output for bitmap decision path Ævar Arnfjörð Bjarmason
2022-03-29 7:38 ` Teng Long Teng Long
2022-03-29 8:54 ` Ævar Arnfjörð Bjarmason
2022-04-21 13:26 ` [PATCH v2 0/5] trace2 output for bitmap decision path Teng Long
2022-04-21 13:26 ` [PATCH v2 1/5] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-05-11 21:31 ` Taylor Blau
2022-04-21 13:26 ` [PATCH v2 2/5] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-05-11 21:31 ` Taylor Blau
2022-04-21 13:26 ` [PATCH v2 3/5] pack-bitmap.c: make warnings more detailed when opening bitmap Teng Long
2022-04-21 17:25 ` Taylor Blau
2022-05-06 9:08 ` Teng Long
2022-04-21 13:26 ` [PATCH v2 4/5] bitmap: add trace2 outputs during open "bitmap" file Teng Long
2022-04-21 15:51 ` Ævar Arnfjörð Bjarmason
2022-05-06 11:27 ` Teng Long
2022-05-06 11:53 ` Teng Long
2022-04-21 16:32 ` Jeff Hostetler
2022-05-06 12:43 ` Teng Long
2022-05-10 20:47 ` Jeff Hostetler
2022-04-21 13:26 ` [PATCH v2 5/5] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-04-21 15:41 ` Ævar Arnfjörð Bjarmason
2022-05-06 12:55 ` Teng Long
2022-06-12 7:44 ` [PATCH v3 0/5] Teng Long
2022-06-12 7:44 ` Teng Long
2022-06-12 7:44 ` [PATCH v3 0/5] trace2 output for bitmap decision path Teng Long
2022-06-12 7:44 ` [PATCH v3 1/5] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-06-12 7:44 ` [PATCH v3 2/5] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-06-12 7:44 ` [PATCH v3 3/5] pack-bitmap.c: make warnings support i18N when opening bitmap Teng Long
2022-06-12 7:44 ` [PATCH v3 4/5] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-06-14 1:15 ` Taylor Blau
2022-06-20 13:17 ` Teng Long
2022-06-12 7:44 ` [PATCH v3 5/5] bitmap: add trace2 outputs during open "bitmap" file Teng Long
2022-06-13 20:59 ` Junio C Hamano
2022-06-20 13:32 ` Teng Long
2022-06-14 1:40 ` Taylor Blau
2022-06-21 6:58 ` Teng Long
2022-06-22 12:51 ` Jeff Hostetler
2022-06-23 9:38 ` Teng Long
2022-06-23 15:14 ` Jeff Hostetler
2022-06-24 8:27 ` [PATCH v3 5/5] bitmap: add trace2 outputs during open "bitmap" Teng Long
2022-06-21 13:25 ` [PATCH v3 0/5] trace2 output for bitmap decision path Teng Long
2022-06-21 13:25 ` [PATCH v3 1/5] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-06-21 13:25 ` [PATCH v3 2/5] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-06-21 13:25 ` [PATCH v3 3/5] pack-bitmap.c: make warnings support i18N when opening bitmap Teng Long
2022-06-21 13:25 ` [PATCH v3 4/5] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-06-21 13:25 ` [PATCH v3 5/5] bitmap: add trace2 outputs during open "bitmap" file Teng Long
2022-06-22 13:04 ` Jeff Hostetler
2022-06-22 15:12 ` Junio C Hamano
2022-06-28 8:17 ` [PATCH v5 0/5] tr2: avoid to print "interesting" config repeatedly Teng Long
2022-06-28 8:17 ` [PATCH v5 1/5] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-06-28 8:17 ` [PATCH v5 2/5] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-06-28 8:17 ` [PATCH v5 3/5] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-06-28 18:04 ` Junio C Hamano
2022-07-05 9:04 ` Teng Long
2022-07-05 18:23 ` Junio C Hamano
2022-06-28 8:17 ` [PATCH v5 4/5] pack-bitmap.c: retrieve missing i18n translations Teng Long
2022-06-28 8:58 ` Ævar Arnfjörð Bjarmason
2022-06-28 17:28 ` Eric Sunshine
2022-07-06 14:19 ` Teng Long
2022-07-06 14:06 ` Teng Long
2022-06-28 18:07 ` Junio C Hamano
2022-07-07 11:59 ` Teng Long
2022-07-07 16:45 ` Junio C Hamano
2022-07-11 11:04 ` Teng Long
2022-06-28 8:17 ` [PATCH v5 5/5] tr2: avoid to print "interesting" config repeatedly Teng Long
2022-06-28 9:13 ` Ævar Arnfjörð Bjarmason
2022-06-28 18:12 ` Junio C Hamano
2022-07-01 14:31 ` Jeff Hostetler
2022-07-11 4:11 ` Teng Long
2022-07-11 3:51 ` Teng Long
2022-07-11 12:43 ` [PATCH v6 0/7] trace2: dump scope when print "interesting" config Teng Long
2022-07-11 12:43 ` [PATCH v6 1/7] clean: fixed issues related to text output format Teng Long
2022-07-11 21:08 ` Junio C Hamano
2022-07-13 11:44 ` Teng Long
2022-07-11 12:43 ` [PATCH v6 2/7] pack-bitmap.c: mark more strings for translations Teng Long
2022-07-11 12:43 ` [PATCH v6 3/7] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-07-11 12:44 ` [PATCH v6 4/7] pack-bitmap.c: don't ignore ENOENT silently Teng Long
2022-07-11 14:38 ` Ævar Arnfjörð Bjarmason
2022-07-13 14:14 ` Teng Long
2022-07-11 21:22 ` Junio C Hamano
2022-07-14 15:25 ` Teng Long
2022-07-11 12:44 ` [PATCH v6 5/7] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-07-11 14:53 ` Ævar Arnfjörð Bjarmason
2022-07-15 2:34 ` Teng Long
2022-07-11 12:44 ` [PATCH v6 6/7] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-07-11 12:44 ` [PATCH v6 7/7] tr2: dump names if config exist in multiple scopes Teng Long
2022-07-11 14:40 ` Ævar Arnfjörð Bjarmason
2022-07-11 19:19 ` Jeff Hostetler
2022-07-11 14:59 ` [PATCH v6 0/7] trace2: dump scope when print "interesting" config Ævar Arnfjörð Bjarmason
2022-07-18 8:36 ` Teng Long
2022-07-18 16:45 ` [PATCH v7 " Teng Long
2022-07-18 16:46 ` [PATCH v7 1/7] pack-bitmap.c: fix formatting of error messages Teng Long
2022-07-18 16:46 ` [PATCH v7 2/7] pack-bitmap.c: mark more strings for translations Teng Long
2022-07-18 16:46 ` [PATCH v7 3/7] pack-bitmap.c: rename "idx_name" to "bitmap_name" Teng Long
2022-07-18 16:46 ` [PATCH v7 4/7] pack-bitmap.c: do not ignore error when opening a bitmap file Teng Long
2022-07-18 16:46 ` [PATCH v7 5/7] pack-bitmap.c: using error() instead of silently returning -1 Teng Long
2022-07-18 16:46 ` [PATCH v7 6/7] pack-bitmap.c: continue looping when first MIDX bitmap is found Teng Long
2022-07-18 16:46 ` [PATCH v7 7/7] tr2: dump names if config exist in multiple scopes Teng Long
2022-07-18 20:13 ` Jeff Hostetler
2022-07-19 7:40 ` tenglong.tl
2022-07-19 21:03 ` Junio C Hamano
2022-07-20 12:48 ` tenglong.tl
2022-07-18 18:57 ` [PATCH v7 0/7] trace2: dump scope when print "interesting" config Junio C Hamano
2022-07-18 19:07 ` Ævar Arnfjörð Bjarmason
2022-07-19 11:26 ` tenglong.tl
2022-07-19 11:42 ` Ævar Arnfjörð Bjarmason
2022-07-19 12:34 ` tenglong.tl
2022-07-21 9:05 ` [PATCH v8 0/6] pack-bitmap.c: optimize error messages tenglong.tl
2022-07-21 9:05 ` [PATCH v8 1/6] pack-bitmap.c: fix formatting of " tenglong.tl
2022-07-21 9:05 ` [PATCH v8 2/6] pack-bitmap.c: mark more strings for translations tenglong.tl
2022-07-21 9:05 ` [PATCH v8 3/6] pack-bitmap.c: rename "idx_name" to "bitmap_name" tenglong.tl
2022-07-21 9:05 ` [PATCH v8 4/6] pack-bitmap.c: do not ignore error when opening a bitmap file tenglong.tl
2022-07-21 9:05 ` [PATCH v8 5/6] pack-bitmap.c: using error() instead of silently returning -1 tenglong.tl
2022-07-21 9:05 ` [PATCH v8 6/6] pack-bitmap.c: continue looping when first MIDX bitmap is found tenglong.tl
2022-07-21 23:01 ` [PATCH v8 0/6] pack-bitmap.c: optimize error messages Junio C Hamano
2022-07-22 6:17 ` tenglong.tl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220329024949.62091-1-dyroneteng@gmail.com \
--to=dyroneteng@gmail.com \
--cc=avarab@gmail.com \
--cc=derrickstolee@github.com \
--cc=git@vger.kernel.org \
--cc=me@ttaylorr.com \
--cc=tenglong.tl@alibaba-inc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.