From: Petr Lautrbach <plautrba@redhat.com>
To: selinux@vger.kernel.org
Cc: Petr Lautrbach <plautrba@redhat.com>
Subject: [PATCH] Split po/ translation files into the relevant sub-directories
Date: Fri, 1 Apr 2022 11:57:24 +0200 [thread overview]
Message-ID: <20220401095724.98956-2-plautrba@redhat.com> (raw)
In-Reply-To: <20220401095724.98956-1-plautrba@redhat.com>
When policycoreutils was split into policycoreutils/ python/ gui/ and sandbox/
sub-directories, po/ translation files stayed in policycoreutils/.
This commit splits original policycoreutils translations to
policycoreutils, selinux-python, selinux-gui, and selinux-sandbox.
See original Fedora issue https://github.com/fedora-selinux/selinux/issues/43
Signed-off-by: Petr Lautrbach <plautrba@redhat.com>
---
gui/Makefile | 4 +
gui/booleansPage.py | 2 +-
gui/domainsPage.py | 2 +-
gui/fcontextPage.py | 2 +-
gui/loginsPage.py | 2 +-
gui/modulesPage.py | 2 +-
gui/po/Makefile | 84 +++++++++++++++++++
gui/po/POTFILES | 17 ++++
gui/polgengui.py | 2 +-
gui/portsPage.py | 2 +-
gui/semanagePage.py | 2 +-
gui/statusPage.py | 2 +-
gui/system-config-selinux.py | 2 +-
gui/usersPage.py | 2 +-
policycoreutils/po/Makefile | 72 ++---------------
policycoreutils/po/POTFILES | 9 +++
python/Makefile | 2 +-
python/chcat/chcat | 2 +-
python/po/Makefile | 85 ++++++++++++++++++++
python/po/POTFILES | 10 +++
python/semanage/semanage | 2 +-
python/semanage/seobject.py | 2 +-
python/sepolgen/src/sepolgen/sepolgeni18n.py | 2 +-
python/sepolicy/sepolicy.py | 2 +-
python/sepolicy/sepolicy/__init__.py | 2 +-
python/sepolicy/sepolicy/generate.py | 2 +-
python/sepolicy/sepolicy/gui.py | 2 +-
python/sepolicy/sepolicy/interface.py | 2 +-
sandbox/Makefile | 3 +
sandbox/po/Makefile | 84 +++++++++++++++++++
sandbox/po/POTFILES | 1 +
sandbox/sandbox | 2 +-
32 files changed, 324 insertions(+), 89 deletions(-)
create mode 100644 gui/po/Makefile
create mode 100644 gui/po/POTFILES
create mode 100644 policycoreutils/po/POTFILES
create mode 100644 python/po/Makefile
create mode 100644 python/po/POTFILES
create mode 100644 sandbox/po/Makefile
create mode 100644 sandbox/po/POTFILES
diff --git a/gui/Makefile b/gui/Makefile
index ca965c942912..4035fb21b8c9 100644
--- a/gui/Makefile
+++ b/gui/Makefile
@@ -22,6 +22,7 @@ system-config-selinux.ui \
usersPage.py
all: $(TARGETS) system-config-selinux.py polgengui.py
+ (cd po && $(MAKE) $@)
install: all
-mkdir -p $(DESTDIR)$(MANDIR)/man8
@@ -54,7 +55,10 @@ install: all
install -m 644 sepolicy_$${i}.png $(DESTDIR)$(DATADIR)/icons/hicolor/$${i}x$${i}/apps/sepolicy.png; \
done
install -m 644 org.selinux.config.policy $(DESTDIR)$(DATADIR)/polkit-1/actions/
+ (cd po && $(MAKE) $@)
+
clean:
+ (cd po && $(MAKE) $@)
indent:
diff --git a/gui/booleansPage.py b/gui/booleansPage.py
index 7849bea26a06..dd12b6d6ab86 100644
--- a/gui/booleansPage.py
+++ b/gui/booleansPage.py
@@ -38,7 +38,7 @@ DISABLED = 2
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/domainsPage.py b/gui/domainsPage.py
index bad5140d8c59..6bbe4de5884f 100644
--- a/gui/domainsPage.py
+++ b/gui/domainsPage.py
@@ -30,7 +30,7 @@ from semanagePage import *
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/fcontextPage.py b/gui/fcontextPage.py
index d26aa1b405a9..52292cae01d2 100644
--- a/gui/fcontextPage.py
+++ b/gui/fcontextPage.py
@@ -47,7 +47,7 @@ class context:
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/loginsPage.py b/gui/loginsPage.py
index b67eb8bc42af..cbfb0cc23f65 100644
--- a/gui/loginsPage.py
+++ b/gui/loginsPage.py
@@ -29,7 +29,7 @@ from semanagePage import *
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/modulesPage.py b/gui/modulesPage.py
index 0584acf9b3a4..35a0129bab9c 100644
--- a/gui/modulesPage.py
+++ b/gui/modulesPage.py
@@ -30,7 +30,7 @@ from semanagePage import *
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/po/Makefile b/gui/po/Makefile
new file mode 100644
index 000000000000..7ccd48eb2422
--- /dev/null
+++ b/gui/po/Makefile
@@ -0,0 +1,84 @@
+#
+# Makefile for the PO files (translation) catalog
+#
+
+PREFIX ?= /usr
+
+# What is this package?
+NLSPACKAGE = gui
+POTFILE = $(NLSPACKAGE).pot
+INSTALL = /usr/bin/install -c -p
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_DIR = /usr/bin/install -d
+
+# destination directory
+INSTALL_NLS_DIR = $(PREFIX)/share/locale
+
+# PO catalog handling
+MSGMERGE = msgmerge
+MSGMERGE_FLAGS = -q
+XGETTEXT = xgettext --default-domain=$(NLSPACKAGE)
+MSGFMT = msgfmt
+
+# All possible linguas
+PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po)))
+
+# Only the files matching what the user has set in LINGUAS
+USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS))
+
+# if no valid LINGUAS, build all languages
+USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS))
+
+POFILES = $(patsubst %,%.po,$(USE_LINGUAS))
+MOFILES = $(patsubst %.po,%.mo,$(POFILES))
+POTFILES = $(shell cat POTFILES)
+
+#default:: clean
+
+all:: $(MOFILES)
+
+$(POTFILE): $(POTFILES)
+ $(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES)
+ @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \
+ rm -f $(NLSPACKAGE).po; \
+ else \
+ mv -f $(NLSPACKAGE).po $(POTFILE); \
+ fi; \
+
+
+refresh-po: Makefile
+ for cat in $(POFILES); do \
+ lang=`basename $$cat .po`; \
+ if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \
+ mv -f $$lang.pot $$lang.po ; \
+ echo "$(MSGMERGE) of $$lang succeeded" ; \
+ else \
+ echo "$(MSGMERGE) of $$lang failed" ; \
+ rm -f $$lang.pot ; \
+ fi \
+ done
+
+clean:
+ @rm -fv *mo *~ .depend
+ @rm -rf tmp
+
+install: $(MOFILES)
+ @for n in $(MOFILES); do \
+ l=`basename $$n .mo`; \
+ $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \
+ $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \
+ done
+
+%.mo: %.po
+ $(MSGFMT) -o $@ $<
+report:
+ @for cat in $(wildcard *.po); do \
+ echo -n "$$cat: "; \
+ msgfmt -v --statistics -o /dev/null $$cat; \
+ done
+
+.PHONY: missing depend
+
+relabel:
+
+test:
diff --git a/gui/po/POTFILES b/gui/po/POTFILES
new file mode 100644
index 000000000000..1795c5c1951b
--- /dev/null
+++ b/gui/po/POTFILES
@@ -0,0 +1,17 @@
+../booleansPage.py
+../domainsPage.py
+../fcontextPage.py
+../loginsPage.py
+../modulesPage.py
+../org.selinux.config.policy
+../polgengui.py
+../polgen.ui
+../portsPage.py
+../selinux-polgengui.desktop
+../semanagePage.py
+../sepolicy.desktop
+../statusPage.py
+../system-config-selinux.desktop
+../system-config-selinux.py
+../system-config-selinux.ui
+../usersPage.py
diff --git a/gui/polgengui.py b/gui/polgengui.py
index d284ded65279..01f541bafae8 100644
--- a/gui/polgengui.py
+++ b/gui/polgengui.py
@@ -63,7 +63,7 @@ def get_all_modules():
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/portsPage.py b/gui/portsPage.py
index 30f58383bc1d..a537ecc8c0a1 100644
--- a/gui/portsPage.py
+++ b/gui/portsPage.py
@@ -35,7 +35,7 @@ from semanagePage import *
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/semanagePage.py b/gui/semanagePage.py
index 4127804fbbee..5361d69c1313 100644
--- a/gui/semanagePage.py
+++ b/gui/semanagePage.py
@@ -22,7 +22,7 @@ from gi.repository import Gdk, Gtk
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/statusPage.py b/gui/statusPage.py
index 766854b19cba..a8f079b9b163 100644
--- a/gui/statusPage.py
+++ b/gui/statusPage.py
@@ -35,7 +35,7 @@ RELABELFILE = "/.autorelabel"
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/system-config-selinux.py b/gui/system-config-selinux.py
index 3f70122b87e8..8c46c987b974 100644
--- a/gui/system-config-selinux.py
+++ b/gui/system-config-selinux.py
@@ -45,7 +45,7 @@ import selinux
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/gui/usersPage.py b/gui/usersPage.py
index 26794ed5c3f3..d15d4c5a71dd 100644
--- a/gui/usersPage.py
+++ b/gui/usersPage.py
@@ -29,7 +29,7 @@ from semanagePage import *
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-gui"
try:
import gettext
kwargs = {}
diff --git a/policycoreutils/po/Makefile b/policycoreutils/po/Makefile
index 575e143122e6..5ff92bff6fdc 100644
--- a/policycoreutils/po/Makefile
+++ b/policycoreutils/po/Makefile
@@ -3,7 +3,6 @@
#
PREFIX ?= /usr
-TOP = ../..
# What is this package?
NLSPACKAGE = policycoreutils
@@ -32,74 +31,13 @@ USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS))
POFILES = $(patsubst %,%.po,$(USE_LINGUAS))
MOFILES = $(patsubst %.po,%.mo,$(POFILES))
-POTFILES = \
- ../run_init/open_init_pty.c \
- ../run_init/run_init.c \
- ../semodule_link/semodule_link.c \
- ../audit2allow/audit2allow \
- ../semanage/seobject.py \
- ../setsebool/setsebool.c \
- ../newrole/newrole.c \
- ../load_policy/load_policy.c \
- ../sestatus/sestatus.c \
- ../semodule/semodule.c \
- ../setfiles/setfiles.c \
- ../semodule_package/semodule_package.c \
- ../semodule_deps/semodule_deps.c \
- ../semodule_expand/semodule_expand.c \
- ../scripts/chcat \
- ../scripts/fixfiles \
- ../restorecond/stringslist.c \
- ../restorecond/restorecond.h \
- ../restorecond/utmpwatcher.h \
- ../restorecond/stringslist.h \
- ../restorecond/restorecond.c \
- ../restorecond/utmpwatcher.c \
- ../gui/booleansPage.py \
- ../gui/fcontextPage.py \
- ../gui/loginsPage.py \
- ../gui/mappingsPage.py \
- ../gui/modulesPage.py \
- ../gui/polgen.glade \
- ../gui/polgengui.py \
- ../gui/portsPage.py \
- ../gui/semanagePage.py \
- ../gui/statusPage.py \
- ../gui/system-config-selinux.glade \
- ../gui/system-config-selinux.py \
- ../gui/usersPage.py \
- ../secon/secon.c \
- booleans.py \
- ../sepolicy/sepolicy.py \
- ../sepolicy/sepolicy/communicate.py \
- ../sepolicy/sepolicy/__init__.py \
- ../sepolicy/sepolicy/network.py \
- ../sepolicy/sepolicy/generate.py \
- ../sepolicy/sepolicy/sepolicy.glade \
- ../sepolicy/sepolicy/gui.py \
- ../sepolicy/sepolicy/manpage.py \
- ../sepolicy/sepolicy/transition.py \
- ../sepolicy/sepolicy/templates/executable.py \
- ../sepolicy/sepolicy/templates/__init__.py \
- ../sepolicy/sepolicy/templates/network.py \
- ../sepolicy/sepolicy/templates/rw.py \
- ../sepolicy/sepolicy/templates/script.py \
- ../sepolicy/sepolicy/templates/semodule.py \
- ../sepolicy/sepolicy/templates/tmp.py \
- ../sepolicy/sepolicy/templates/user.py \
- ../sepolicy/sepolicy/templates/var_lib.py \
- ../sepolicy/sepolicy/templates/var_log.py \
- ../sepolicy/sepolicy/templates/var_run.py \
- ../sepolicy/sepolicy/templates/var_spool.py
+POTFILES = $(shell cat POTFILES)
#default:: clean
-all:: $(MOFILES)
+all:: $(POTFILE) $(MOFILES)
-booleans.py:
- sepolicy booleans -a > booleans.py
-
-$(POTFILE): $(POTFILES) booleans.py
+$(POTFILE): $(POTFILES)
$(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES)
@if cmp -s $(NLSPACKAGE).po $(POTFILE); then \
rm -f $(NLSPACKAGE).po; \
@@ -107,8 +45,6 @@ $(POTFILE): $(POTFILES) booleans.py
mv -f $(NLSPACKAGE).po $(POTFILE); \
fi; \
-update-po: Makefile $(POTFILE) refresh-po
- @rm -f booleans.py
refresh-po: Makefile
for cat in $(POFILES); do \
@@ -144,3 +80,5 @@ report:
.PHONY: missing depend
relabel:
+
+test:
diff --git a/policycoreutils/po/POTFILES b/policycoreutils/po/POTFILES
new file mode 100644
index 000000000000..12237dc61ee4
--- /dev/null
+++ b/policycoreutils/po/POTFILES
@@ -0,0 +1,9 @@
+../run_init/open_init_pty.c
+../run_init/run_init.c
+../setsebool/setsebool.c
+../newrole/newrole.c
+../load_policy/load_policy.c
+../sestatus/sestatus.c
+../semodule/semodule.c
+../setfiles/setfiles.c
+../secon/secon.c
diff --git a/python/Makefile b/python/Makefile
index 9b66d52fbd4d..00312dbdb5c6 100644
--- a/python/Makefile
+++ b/python/Makefile
@@ -1,4 +1,4 @@
-SUBDIRS = sepolicy audit2allow semanage sepolgen chcat
+SUBDIRS = sepolicy audit2allow semanage sepolgen chcat po
all install relabel clean indent test:
@for subdir in $(SUBDIRS); do \
diff --git a/python/chcat/chcat b/python/chcat/chcat
index fdd2e46ee3f9..839ddd3b54b6 100755
--- a/python/chcat/chcat
+++ b/python/chcat/chcat
@@ -30,7 +30,7 @@ import getopt
import selinux
import seobject
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/po/Makefile b/python/po/Makefile
new file mode 100644
index 000000000000..05e49f0cc274
--- /dev/null
+++ b/python/po/Makefile
@@ -0,0 +1,85 @@
+#
+# Makefile for the PO files (translation) catalog
+#
+
+PREFIX ?= /usr
+
+# What is this package?
+NLSPACKAGE = python
+POTFILE = $(NLSPACKAGE).pot
+INSTALL = /usr/bin/install -c -p
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_DIR = /usr/bin/install -d
+
+# destination directory
+INSTALL_NLS_DIR = $(PREFIX)/share/locale
+
+# PO catalog handling
+MSGMERGE = msgmerge
+MSGMERGE_FLAGS = -q
+XGETTEXT = xgettext --default-domain=$(NLSPACKAGE)
+MSGFMT = msgfmt
+
+# All possible linguas
+PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po)))
+
+# Only the files matching what the user has set in LINGUAS
+USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS))
+
+# if no valid LINGUAS, build all languages
+USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS))
+
+POFILES = $(patsubst %,%.po,$(USE_LINGUAS))
+MOFILES = $(patsubst %.po,%.mo,$(POFILES))
+POTFILES = $(shell cat POTFILES)
+
+#default:: clean
+
+all:: $(MOFILES)
+
+$(POTFILE): $(POTFILES)
+ $(XGETTEXT) -L Python --keyword=_ --keyword=N_ $(POTFILES)
+ $(XGETTEXT) -j --keyword=_ --keyword=N_ ../sepolicy/sepolicy/sepolicy.glade
+ @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \
+ rm -f $(NLSPACKAGE).po; \
+ else \
+ mv -f $(NLSPACKAGE).po $(POTFILE); \
+ fi; \
+
+
+refresh-po: Makefile
+ for cat in $(POFILES); do \
+ lang=`basename $$cat .po`; \
+ if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \
+ mv -f $$lang.pot $$lang.po ; \
+ echo "$(MSGMERGE) of $$lang succeeded" ; \
+ else \
+ echo "$(MSGMERGE) of $$lang failed" ; \
+ rm -f $$lang.pot ; \
+ fi \
+ done
+
+clean:
+ @rm -fv *mo *~ .depend
+ @rm -rf tmp
+
+install: $(MOFILES)
+ @for n in $(MOFILES); do \
+ l=`basename $$n .mo`; \
+ $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \
+ $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \
+ done
+
+%.mo: %.po
+ $(MSGFMT) -o $@ $<
+report:
+ @for cat in $(wildcard *.po); do \
+ echo -n "$$cat: "; \
+ msgfmt -v --statistics -o /dev/null $$cat; \
+ done
+
+.PHONY: missing depend
+
+relabel:
+
+test:
diff --git a/python/po/POTFILES b/python/po/POTFILES
new file mode 100644
index 000000000000..128eb870a69e
--- /dev/null
+++ b/python/po/POTFILES
@@ -0,0 +1,10 @@
+../audit2allow/audit2allow
+../chcat/chcat
+../semanage/semanage
+../semanage/seobject.py
+../sepolgen/src/sepolgen/interfaces.py
+../sepolicy/sepolicy/generate.py
+../sepolicy/sepolicy/gui.py
+../sepolicy/sepolicy/__init__.py
+../sepolicy/sepolicy/interface.py
+../sepolicy/sepolicy.py
diff --git a/python/semanage/semanage b/python/semanage/semanage
index ff9fb66b1411..12bb159ef649 100644
--- a/python/semanage/semanage
+++ b/python/semanage/semanage
@@ -30,7 +30,7 @@ import seobject
import sys
import traceback
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/semanage/seobject.py b/python/semanage/seobject.py
index 21adbf6eb74f..69e60db80060 100644
--- a/python/semanage/seobject.py
+++ b/python/semanage/seobject.py
@@ -29,7 +29,7 @@ import sys
import stat
import socket
from semanage import *
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
import sepolicy
from setools.policyrep import SELinuxPolicy
from setools.typequery import TypeQuery
diff --git a/python/sepolgen/src/sepolgen/sepolgeni18n.py b/python/sepolgen/src/sepolgen/sepolgeni18n.py
index 998c4356415c..56ebd807c69c 100644
--- a/python/sepolgen/src/sepolgen/sepolgeni18n.py
+++ b/python/sepolgen/src/sepolgen/sepolgeni18n.py
@@ -19,7 +19,7 @@
try:
import gettext
- t = gettext.translation( 'yumex' )
+ t = gettext.translation( 'selinux-python' )
_ = t.gettext
except:
def _(str):
diff --git a/python/sepolicy/sepolicy.py b/python/sepolicy/sepolicy.py
index 7b2230651099..32956e58f52e 100755
--- a/python/sepolicy/sepolicy.py
+++ b/python/sepolicy/sepolicy.py
@@ -28,7 +28,7 @@ import sepolicy
from multiprocessing import Pool
from sepolicy import get_os_version, get_conditionals, get_conditionals_format_text
import argparse
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/sepolicy/sepolicy/__init__.py b/python/sepolicy/sepolicy/__init__.py
index e8654abbceb3..203ca25f4210 100644
--- a/python/sepolicy/sepolicy/__init__.py
+++ b/python/sepolicy/sepolicy/__init__.py
@@ -23,7 +23,7 @@ from setools.typeattrquery import TypeAttributeQuery
from setools.typequery import TypeQuery
from setools.userquery import UserQuery
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/sepolicy/sepolicy/generate.py b/python/sepolicy/sepolicy/generate.py
index 4e1ed4e9dc31..43180ca6fda4 100644
--- a/python/sepolicy/sepolicy/generate.py
+++ b/python/sepolicy/sepolicy/generate.py
@@ -48,7 +48,7 @@ import sepolgen.defaults as defaults
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/sepolicy/sepolicy/gui.py b/python/sepolicy/sepolicy/gui.py
index 1e86422b864a..c9ca158ddd09 100644
--- a/python/sepolicy/sepolicy/gui.py
+++ b/python/sepolicy/sepolicy/gui.py
@@ -41,7 +41,7 @@ import os
import re
import unicodedata
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/python/sepolicy/sepolicy/interface.py b/python/sepolicy/sepolicy/interface.py
index bdffb770f364..9d40aea1498d 100644
--- a/python/sepolicy/sepolicy/interface.py
+++ b/python/sepolicy/sepolicy/interface.py
@@ -30,7 +30,7 @@ __all__ = ['get_all_interfaces', 'get_interfaces_from_xml', 'get_admin', 'get_us
##
## I18N
##
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-python"
try:
import gettext
kwargs = {}
diff --git a/sandbox/Makefile b/sandbox/Makefile
index 9da5e58db9e6..84cb5a39bf7e 100644
--- a/sandbox/Makefile
+++ b/sandbox/Makefile
@@ -13,6 +13,7 @@ override LDLIBS += -lselinux -lcap-ng
SEUNSHARE_OBJS = seunshare.o
all: sandbox seunshare sandboxX.sh start
+ (cd po && $(MAKE) $@)
seunshare: $(SEUNSHARE_OBJS)
@@ -39,12 +40,14 @@ install: all
install -m 755 start $(DESTDIR)$(SHAREDIR)
-mkdir -p $(DESTDIR)$(SYSCONFDIR)
install -m 644 sandbox.conf $(DESTDIR)$(SYSCONFDIR)/sandbox
+ (cd po && $(MAKE) $@)
test:
@$(PYTHON) test_sandbox.py -v
clean:
-rm -f seunshare *.o *~
+ (cd po && $(MAKE) $@)
indent:
../../scripts/Lindent $(wildcard *.[ch])
diff --git a/sandbox/po/Makefile b/sandbox/po/Makefile
new file mode 100644
index 000000000000..e75343649b67
--- /dev/null
+++ b/sandbox/po/Makefile
@@ -0,0 +1,84 @@
+#
+# Makefile for the PO files (translation) catalog
+#
+
+PREFIX ?= /usr
+
+# What is this package?
+NLSPACKAGE = sandbox
+POTFILE = $(NLSPACKAGE).pot
+INSTALL = /usr/bin/install -c -p
+INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_DIR = /usr/bin/install -d
+
+# destination directory
+INSTALL_NLS_DIR = $(PREFIX)/share/locale
+
+# PO catalog handling
+MSGMERGE = msgmerge
+MSGMERGE_FLAGS = -q
+XGETTEXT = xgettext -L Python --default-domain=$(NLSPACKAGE)
+MSGFMT = msgfmt
+
+# All possible linguas
+PO_LINGUAS := $(sort $(patsubst %.po,%,$(wildcard *.po)))
+
+# Only the files matching what the user has set in LINGUAS
+USER_LINGUAS := $(filter $(patsubst %,%%,$(LINGUAS)),$(PO_LINGUAS))
+
+# if no valid LINGUAS, build all languages
+USE_LINGUAS := $(if $(USER_LINGUAS),$(USER_LINGUAS),$(PO_LINGUAS))
+
+POFILES = $(patsubst %,%.po,$(USE_LINGUAS))
+MOFILES = $(patsubst %.po,%.mo,$(POFILES))
+POTFILES = $(shell cat POTFILES)
+
+#default:: clean
+
+all:: $(POTFILE) $(MOFILES)
+
+$(POTFILE): $(POTFILES)
+ $(XGETTEXT) --keyword=_ --keyword=N_ $(POTFILES)
+ @if cmp -s $(NLSPACKAGE).po $(POTFILE); then \
+ rm -f $(NLSPACKAGE).po; \
+ else \
+ mv -f $(NLSPACKAGE).po $(POTFILE); \
+ fi; \
+
+
+refresh-po: Makefile
+ for cat in $(POFILES); do \
+ lang=`basename $$cat .po`; \
+ if $(MSGMERGE) $(MSGMERGE_FLAGS) $$lang.po $(POTFILE) > $$lang.pot ; then \
+ mv -f $$lang.pot $$lang.po ; \
+ echo "$(MSGMERGE) of $$lang succeeded" ; \
+ else \
+ echo "$(MSGMERGE) of $$lang failed" ; \
+ rm -f $$lang.pot ; \
+ fi \
+ done
+
+clean:
+ @rm -fv *mo *~ .depend
+ @rm -rf tmp
+
+install: $(MOFILES)
+ @for n in $(MOFILES); do \
+ l=`basename $$n .mo`; \
+ $(INSTALL_DIR) $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES; \
+ $(INSTALL_DATA) --verbose $$n $(DESTDIR)$(INSTALL_NLS_DIR)/$$l/LC_MESSAGES/selinux-$(NLSPACKAGE).mo; \
+ done
+
+%.mo: %.po
+ $(MSGFMT) -o $@ $<
+report:
+ @for cat in $(wildcard *.po); do \
+ echo -n "$$cat: "; \
+ msgfmt -v --statistics -o /dev/null $$cat; \
+ done
+
+.PHONY: missing depend
+
+relabel:
+
+test:
diff --git a/sandbox/po/POTFILES b/sandbox/po/POTFILES
new file mode 100644
index 000000000000..deff3f2f4656
--- /dev/null
+++ b/sandbox/po/POTFILES
@@ -0,0 +1 @@
+../sandbox
diff --git a/sandbox/sandbox b/sandbox/sandbox
index ca5f1e030a51..16c43b51eaaa 100644
--- a/sandbox/sandbox
+++ b/sandbox/sandbox
@@ -37,7 +37,7 @@ import sepolicy
SEUNSHARE = "/usr/sbin/seunshare"
SANDBOXSH = "/usr/share/sandbox/sandboxX.sh"
-PROGNAME = "policycoreutils"
+PROGNAME = "selinux-sandbox"
try:
import gettext
kwargs = {}
--
2.35.1
next prev parent reply other threads:[~2022-04-01 9:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 9:57 Translate or not? Petr Lautrbach
2022-04-01 9:57 ` Petr Lautrbach [this message]
2022-04-04 21:08 ` [PATCH] Split po/ translation files into the relevant sub-directories James Carter
2022-04-06 9:32 ` Petr Lautrbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401095724.98956-2-plautrba@redhat.com \
--to=plautrba@redhat.com \
--cc=selinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.