From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
Christoph Niedermaier <cniedermaier@dh-electronics.com>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
robert.foss@linaro.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Dmitry Osipenko <digetx@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH v2 2/2] drm/panel: lvds: Use bus_flags from DT panel-timing property
Date: Fri, 1 Apr 2022 18:21:54 +0200 [thread overview]
Message-ID: <20220401162154.295152-2-marex@denx.de> (raw)
In-Reply-To: <20220401162154.295152-1-marex@denx.de>
This driver currently rewrites bus_flags based solely on the value of
DT property 'data-mirror' and ignores bus_flags which might have been
set in DT panel-timing node. Specificaly, the 'de-active' DT property
sets DRM_BUS_FLAG_DE_ bus_flags.
Since of_get_drm_panel_display_mode() conveniently parses the bus_flags
out of DT panel-timing property, just ORR them with bus_flags inferred
from 'data-mirror' DT property and use the result as panel bus_flags.
This fixes handling of panels with 'panel-timing { de-active = <1>; };'.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
---
V2: - Collect RB from Laurent, TB from Christoph
---
drivers/gpu/drm/panel/panel-lvds.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index 6422868c1089..eca067e78579 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -33,7 +33,6 @@ struct panel_lvds {
struct drm_display_mode dmode;
u32 bus_flags;
unsigned int bus_format;
- bool data_mirror;
struct regulator *supply;
@@ -99,9 +98,7 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
connector->display_info.height_mm = lvds->dmode.height_mm;
drm_display_info_set_bus_formats(&connector->display_info,
&lvds->bus_format, 1);
- connector->display_info.bus_flags = lvds->data_mirror
- ? DRM_BUS_FLAG_DATA_LSB_TO_MSB
- : DRM_BUS_FLAG_DATA_MSB_TO_LSB;
+ connector->display_info.bus_flags = lvds->bus_flags;
drm_connector_set_panel_orientation(connector, lvds->orientation);
return 1;
@@ -154,7 +151,9 @@ static int panel_lvds_parse_dt(struct panel_lvds *lvds)
lvds->bus_format = ret;
- lvds->data_mirror = of_property_read_bool(np, "data-mirror");
+ lvds->bus_flags |= of_property_read_bool(np, "data-mirror") ?
+ DRM_BUS_FLAG_DATA_LSB_TO_MSB :
+ DRM_BUS_FLAG_DATA_MSB_TO_LSB;
return 0;
}
--
2.35.1
next prev parent reply other threads:[~2022-04-01 16:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 16:21 [PATCH v2 1/2] drm/panel: lvds: Simplify mode parsing Marek Vasut
2022-04-01 16:21 ` Marek Vasut [this message]
2022-04-07 11:16 ` Laurent Pinchart
2022-04-13 4:03 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401162154.295152-2-marex@denx.de \
--to=marex@denx.de \
--cc=cniedermaier@dh-electronics.com \
--cc=daniel.vetter@ffwll.ch \
--cc=digetx@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=robert.foss@linaro.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.