From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 13/13] add ethlog command
Date: Tue, 12 Apr 2022 10:54:48 +0200 [thread overview]
Message-ID: <20220412085448.GZ4012@pengutronix.de> (raw)
In-Reply-To: <20220408082950.824927-14-o.rempel@pengutronix.de>
On Fri, Apr 08, 2022 at 10:29:50AM +0200, Oleksij Rempel wrote:
> It is kind of tcpdump or tshark for barebox. Instead of starting
> application it will let barebox dump everything to the console by still
> allowing to use other application.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> commands/Kconfig | 8 +++++
> commands/Makefile | 1 +
> commands/ethlog.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++
> include/net.h | 11 +++++++
> net/eth.c | 4 +--
> net/net.c | 3 ++
> 6 files changed, 108 insertions(+), 2 deletions(-)
> create mode 100644 commands/ethlog.c
>
> diff --git a/commands/Kconfig b/commands/Kconfig
> index caef1e8fb5..c5505321cf 100644
> --- a/commands/Kconfig
> +++ b/commands/Kconfig
> @@ -1272,6 +1272,14 @@ config CMD_IP_ROUTE_GET
> be shown on the command line or alternatively a variable is set to
> the result.
>
> +config CMD_ETHLOG
> + tristate
> + prompt "ethlog"
> + help
> + log ethernet traffic.
> +
> + Usage: ethlog [-r] [DEVICENAME]
> +
> # end Network commands
> endmenu
>
> diff --git a/commands/Makefile b/commands/Makefile
> index fffb6d979e..b3b7bafe6b 100644
> --- a/commands/Makefile
> +++ b/commands/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_CMD_MEMCMP) += memcmp.o
> obj-$(CONFIG_CMD_MEMCPY) += memcpy.o
> obj-$(CONFIG_CMD_MEMSET) += memset.o
> obj-$(CONFIG_CMD_EDIT) += edit.o
> +obj-$(CONFIG_CMD_ETHLOG) += ethlog.o
> obj-$(CONFIG_CMD_EXEC) += exec.o
> obj-$(CONFIG_CMD_SLEEP) += sleep.o
> obj-$(CONFIG_CMD_SMC) += smc.o
> diff --git a/commands/ethlog.c b/commands/ethlog.c
> new file mode 100644
> index 0000000000..5ae278fc87
> --- /dev/null
> +++ b/commands/ethlog.c
> @@ -0,0 +1,83 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// SPDX-FileCopyrightText: (c) 2022 Pengutronix,
> +// Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +#include <common.h>
> +#include <command.h>
> +#include <complete.h>
> +#include <environment.h>
> +#include <getopt.h>
> +#include <net.h>
> +
> +static void ethlog_rx_monitor(struct eth_device *edev, void *packet,
> + int length)
> +{
> + print_hex_dump(KERN_DEBUG, "rx data <: ", DUMP_PREFIX_OFFSET,
> + 16, 1, packet, length, true);
> +}
> +
> +static void ethlog_tx_monitor(struct eth_device *edev, void *packet,
> + int length)
> +{
> + print_hex_dump(KERN_DEBUG, "tx data >: ", DUMP_PREFIX_OFFSET,
> + 16, 1, packet, length, true);
> +}
It would be nice to print the network device name along with the hex
dump. Maybe it's time for a dev_print_hex_dump()
> +
> +static int do_ethlog(int argc, char *argv[])
> +{
> + struct eth_device *edev;
> + const char *edevname;
> + bool remove = false;
> + int opt;
> +
> + while ((opt = getopt(argc, argv, "r")) > 0) {
> + switch (opt) {
> + case 'r':
> + remove = true;
> + break;
> + default:
> + return COMMAND_ERROR_USAGE;
> + }
> + }
> +
> + if (optind == argc)
> + edevname = "eth0";
> + else
> + edevname = argv[optind];
> +
> + edev = eth_get_byname(edevname);
> + if (!edev) {
> + printf("No such network device: %s\n", edevname);
> + return 1;
> + }
> +
> + if (remove) {
> + edev->tx_monitor = NULL;
> + edev->rx_monitor = NULL;
> +
> + return 0;
> + }
> +
> + if (edev->tx_monitor || edev->rx_monitor) {
> + printf("TX/RX monitor is already registered on %s\n", edevname);
> + return 1;
> + }
This check doesn't look useful at the moment.
> +
> + edev->tx_monitor = ethlog_tx_monitor;
> + edev->rx_monitor = ethlog_rx_monitor;
> +
> + return 0;
> +}
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2022-04-12 8:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 8:29 [PATCH v4 00/13] provide DSA support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 01/13] net: add RX preprocessor support Oleksij Rempel
2022-04-12 7:58 ` Sascha Hauer
2022-04-12 8:14 ` Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 02/13] net: add of_find_eth_device_by_node() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 03/13] net: phy: export of_phy_register_fixed_link() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 04/13] net: add DSA framework to support basic switch functionality Oleksij Rempel
2022-04-12 8:02 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 05/13] driver: add dev_get_priv() helper Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 06/13] net: port part of if_vlan header from kernel v5.17 Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 07/13] spi: port spi_sync_transfer() function " Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 08/13] net: mdio: add MDIO_DEVAD_NONE define Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 09/13] net: phy: make sure MDIO bus is probed if we search for the PHY Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 10/13] of_net: add rev-rmii support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 11/13] net: dsa: add support for SJA11xx switches Oleksij Rempel
2022-04-12 8:25 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver Oleksij Rempel
2022-04-12 8:37 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 13/13] add ethlog command Oleksij Rempel
2022-04-12 8:54 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412085448.GZ4012@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.