All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Ahern <dsahern@kernel.org>
To: netdev@vger.kernel.org, kuba@kernel.org, davem@davemloft.net,
	pabeni@redhat.com
Cc: David Ahern <dsahern@kernel.org>, Ido Schimmel <idosch@idosch.org>
Subject: [PATCH net 2/2] net: Handle l3mdev in ip_tunnel_init_flow
Date: Wed, 13 Apr 2022 11:43:20 -0600	[thread overview]
Message-ID: <20220413174320.28989-3-dsahern@kernel.org> (raw)
In-Reply-To: <20220413174320.28989-1-dsahern@kernel.org>

Ido reported that the commit referenced in the Fixes tag broke
a gre use case with dummy devices. Add a check to ip_tunnel_init_flow
to see if the oif is an l3mdev port and if so set the oif to 0 to
avoid the oif comparison in fib_lookup_good_nhc.

Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c |  2 +-
 include/net/ip_tunnels.h                            | 11 +++++++++--
 net/ipv4/ip_gre.c                                   |  4 ++--
 net/ipv4/ip_tunnel.c                                |  9 +++++----
 4 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
index b73466470f75..fe663b0ab708 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_span.c
@@ -423,7 +423,7 @@ mlxsw_sp_span_gretap4_route(const struct net_device *to_dev,
 
 	parms = mlxsw_sp_ipip_netdev_parms4(to_dev);
 	ip_tunnel_init_flow(&fl4, parms.iph.protocol, *daddrp, *saddrp,
-			    0, 0, parms.link, tun->fwmark, 0);
+			    0, 0, dev_net(to_dev), parms.link, tun->fwmark, 0);
 
 	rt = ip_route_output_key(tun->net, &fl4);
 	if (IS_ERR(rt))
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index 0219fe907b26..88dee57eac8a 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -243,11 +243,18 @@ static inline __be32 tunnel_id_to_key32(__be64 tun_id)
 static inline void ip_tunnel_init_flow(struct flowi4 *fl4,
 				       int proto,
 				       __be32 daddr, __be32 saddr,
-				       __be32 key, __u8 tos, int oif,
+				       __be32 key, __u8 tos,
+				       struct net *net, int oif,
 				       __u32 mark, __u32 tun_inner_hash)
 {
 	memset(fl4, 0, sizeof(*fl4));
-	fl4->flowi4_oif = oif;
+
+	if (oif) {
+		fl4->flowi4_l3mdev = l3mdev_master_upper_ifindex_by_index_rcu(net, oif);
+		/* Legacy VRF/l3mdev use case */
+		fl4->flowi4_oif = fl4->flowi4_l3mdev ? 0 : oif;
+	}
+
 	fl4->daddr = daddr;
 	fl4->saddr = saddr;
 	fl4->flowi4_tos = tos;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 99db2e41ed10..365caebf51ab 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -605,8 +605,8 @@ static int gre_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
 	key = &info->key;
 	ip_tunnel_init_flow(&fl4, IPPROTO_GRE, key->u.ipv4.dst, key->u.ipv4.src,
 			    tunnel_id_to_key32(key->tun_id),
-			    key->tos & ~INET_ECN_MASK, 0, skb->mark,
-			    skb_get_hash(skb));
+			    key->tos & ~INET_ECN_MASK, dev_net(dev), 0,
+			    skb->mark, skb_get_hash(skb));
 	rt = ip_route_output_key(dev_net(dev), &fl4);
 	if (IS_ERR(rt))
 		return PTR_ERR(rt);
diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c
index 5a473319d3a5..94017a8c3994 100644
--- a/net/ipv4/ip_tunnel.c
+++ b/net/ipv4/ip_tunnel.c
@@ -294,8 +294,8 @@ static int ip_tunnel_bind_dev(struct net_device *dev)
 
 		ip_tunnel_init_flow(&fl4, iph->protocol, iph->daddr,
 				    iph->saddr, tunnel->parms.o_key,
-				    RT_TOS(iph->tos), tunnel->parms.link,
-				    tunnel->fwmark, 0);
+				    RT_TOS(iph->tos), dev_net(dev),
+				    tunnel->parms.link, tunnel->fwmark, 0);
 		rt = ip_route_output_key(tunnel->net, &fl4);
 
 		if (!IS_ERR(rt)) {
@@ -570,7 +570,7 @@ void ip_md_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 	}
 	ip_tunnel_init_flow(&fl4, proto, key->u.ipv4.dst, key->u.ipv4.src,
 			    tunnel_id_to_key32(key->tun_id), RT_TOS(tos),
-			    0, skb->mark, skb_get_hash(skb));
+			    dev_net(dev), 0, skb->mark, skb_get_hash(skb));
 	if (tunnel->encap.type != TUNNEL_ENCAP_NONE)
 		goto tx_error;
 
@@ -726,7 +726,8 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev,
 	}
 
 	ip_tunnel_init_flow(&fl4, protocol, dst, tnl_params->saddr,
-			    tunnel->parms.o_key, RT_TOS(tos), tunnel->parms.link,
+			    tunnel->parms.o_key, RT_TOS(tos),
+			    dev_net(dev), tunnel->parms.link,
 			    tunnel->fwmark, skb_get_hash(skb));
 
 	if (ip_tunnel_encap(skb, tunnel, &protocol, &fl4) < 0)
-- 
2.24.3 (Apple Git-128)


  parent reply	other threads:[~2022-04-13 17:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13 17:43 [PATCH net 0/2] l3mdev: Fix ip tunnel case after recent l3mdev change David Ahern
2022-04-13 17:43 ` [PATCH net 1/2] l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu David Ahern
2022-04-13 17:43 ` David Ahern [this message]
2022-04-15 21:50 ` [PATCH net 0/2] l3mdev: Fix ip tunnel case after recent l3mdev change patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413174320.28989-3-dsahern@kernel.org \
    --to=dsahern@kernel.org \
    --cc=davem@davemloft.net \
    --cc=idosch@idosch.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.