From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, will@kernel.org,
usama.anjum@collabora.com, shuah@kernel.org,
krisman@collabora.com, akpm@linux-foundation.org
Subject: + selftests-vm-add-test-for-soft-dirty-pte-bit.patch added to -mm tree
Date: Wed, 20 Apr 2022 14:59:48 -0700 [thread overview]
Message-ID: <20220420215949.0BAD2C385A0@smtp.kernel.org> (raw)
The patch titled
Subject: selftests: vm: add test for Soft-Dirty PTE bit
has been added to the -mm tree. Its filename is
selftests-vm-add-test-for-soft-dirty-pte-bit.patch
This patch should soon appear at
https://ozlabs.org/~akpm/mmots/broken-out/selftests-vm-add-test-for-soft-dirty-pte-bit.patch
and later at
https://ozlabs.org/~akpm/mmotm/broken-out/selftests-vm-add-test-for-soft-dirty-pte-bit.patch
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next and is updated
there every 3-4 working days
------------------------------------------------------
From: Gabriel Krisman Bertazi <krisman@collabora.com>
Subject: selftests: vm: add test for Soft-Dirty PTE bit
This introduces three tests:
1) Sanity check soft dirty basic semantics: allocate area, clean,
dirty, check if the SD bit is flipped.
2) Check VMA reuse: validate the VM_SOFTDIRTY usage
3) Check soft-dirty on huge pages
This was motivated by Will Deacon's fix commit 912efa17e512 ("mm: proc:
Invalidate TLB after clearing soft-dirty page state"). I was tracking the
same issue that he fixed, and this test would have caught it.
Link: https://lkml.kernel.org/r/20220420084036.4101604-2-usama.anjum@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Will Deacon <will@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
tools/testing/selftests/vm/.gitignore | 1
tools/testing/selftests/vm/Makefile | 2
tools/testing/selftests/vm/config | 2
tools/testing/selftests/vm/soft-dirty.c | 145 ++++++++++++++++++++++
4 files changed, 150 insertions(+)
--- a/tools/testing/selftests/vm/config~selftests-vm-add-test-for-soft-dirty-pte-bit
+++ a/tools/testing/selftests/vm/config
@@ -4,3 +4,5 @@ CONFIG_TEST_VMALLOC=m
CONFIG_DEVICE_PRIVATE=y
CONFIG_TEST_HMM=m
CONFIG_GUP_TEST=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_MEM_SOFT_DIRTY=y
--- a/tools/testing/selftests/vm/.gitignore~selftests-vm-add-test-for-soft-dirty-pte-bit
+++ a/tools/testing/selftests/vm/.gitignore
@@ -29,5 +29,6 @@ write_to_hugetlbfs
hmm-tests
memfd_secret
local_config.*
+soft-dirty
split_huge_page_test
ksm_tests
--- a/tools/testing/selftests/vm/Makefile~selftests-vm-add-test-for-soft-dirty-pte-bit
+++ a/tools/testing/selftests/vm/Makefile
@@ -49,6 +49,7 @@ TEST_GEN_FILES += on-fault-limit
TEST_GEN_FILES += thuge-gen
TEST_GEN_FILES += transhuge-stress
TEST_GEN_FILES += userfaultfd
+TEST_GEN_PROGS += soft-dirty
TEST_GEN_PROGS += split_huge_page_test
TEST_GEN_FILES += ksm_tests
@@ -94,6 +95,7 @@ KSFT_KHDR_INSTALL := 1
include ../lib.mk
$(OUTPUT)/madv_populate: vm_util.c
+$(OUTPUT)/soft-dirty: vm_util.c
$(OUTPUT)/split_huge_page_test: vm_util.c
ifeq ($(MACHINE),x86_64)
--- /dev/null
+++ a/tools/testing/selftests/vm/soft-dirty.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+#include <fcntl.h>
+#include <stdint.h>
+#include <malloc.h>
+#include <sys/mman.h>
+#include "../kselftest.h"
+#include "vm_util.h"
+
+#define PAGEMAP_FILE_PATH "/proc/self/pagemap"
+#define TEST_ITERATIONS 10000
+
+static void test_simple(int pagemap_fd, int pagesize)
+{
+ int i;
+ char *map;
+
+ map = aligned_alloc(pagesize, pagesize);
+ if (!map)
+ ksft_exit_fail_msg("mmap failed\n");
+
+ clear_softdirty();
+
+ for (i = 0 ; i < TEST_ITERATIONS; i++) {
+ if (pagemap_is_softdirty(pagemap_fd, map) == 1) {
+ ksft_print_msg("dirty bit was 1, but should be 0 (i=%d)\n", i);
+ break;
+ }
+
+ clear_softdirty();
+ // Write something to the page to get the dirty bit enabled on the page
+ map[0]++;
+
+ if (pagemap_is_softdirty(pagemap_fd, map) == 0) {
+ ksft_print_msg("dirty bit was 0, but should be 1 (i=%d)\n", i);
+ break;
+ }
+
+ clear_softdirty();
+ }
+ free(map);
+
+ ksft_test_result(i == TEST_ITERATIONS, "Test %s\n", __func__);
+}
+
+static void test_vma_reuse(int pagemap_fd, int pagesize)
+{
+ char *map, *map2;
+
+ map = mmap(NULL, pagesize, (PROT_READ | PROT_WRITE), (MAP_PRIVATE | MAP_ANON), -1, 0);
+ if (map == MAP_FAILED)
+ ksft_exit_fail_msg("mmap failed");
+
+ // The kernel always marks new regions as soft dirty
+ ksft_test_result(pagemap_is_softdirty(pagemap_fd, map) == 1,
+ "Test %s dirty bit of allocated page\n", __func__);
+
+ clear_softdirty();
+ munmap(map, pagesize);
+
+ map2 = mmap(NULL, pagesize, (PROT_READ | PROT_WRITE), (MAP_PRIVATE | MAP_ANON), -1, 0);
+ if (map2 == MAP_FAILED)
+ ksft_exit_fail_msg("mmap failed");
+
+ // Dirty bit is set for new regions even if they are reused
+ if (map == map2)
+ ksft_test_result(pagemap_is_softdirty(pagemap_fd, map2) == 1,
+ "Test %s dirty bit of reused address page\n", __func__);
+ else
+ ksft_test_result_skip("Test %s dirty bit of reused address page\n", __func__);
+
+ munmap(map2, pagesize);
+}
+
+static void test_hugepage(int pagemap_fd, int pagesize)
+{
+ char *map;
+ int i, ret;
+ size_t hpage_len = read_pmd_pagesize();
+
+ map = memalign(hpage_len, hpage_len);
+ if (!map)
+ ksft_exit_fail_msg("memalign failed\n");
+
+ ret = madvise(map, hpage_len, MADV_HUGEPAGE);
+ if (ret)
+ ksft_exit_fail_msg("madvise failed %d\n", ret);
+
+ for (i = 0; i < hpage_len; i++)
+ map[i] = (char)i;
+
+ if (check_huge(map)) {
+ ksft_test_result_pass("Test %s huge page allocation\n", __func__);
+
+ clear_softdirty();
+ for (i = 0 ; i < TEST_ITERATIONS ; i++) {
+ if (pagemap_is_softdirty(pagemap_fd, map) == 1) {
+ ksft_print_msg("dirty bit was 1, but should be 0 (i=%d)\n", i);
+ break;
+ }
+
+ clear_softdirty();
+ // Write something to the page to get the dirty bit enabled on the page
+ map[0]++;
+
+ if (pagemap_is_softdirty(pagemap_fd, map) == 0) {
+ ksft_print_msg("dirty bit was 0, but should be 1 (i=%d)\n", i);
+ break;
+ }
+ clear_softdirty();
+ }
+
+ ksft_test_result(i == TEST_ITERATIONS, "Test %s huge page dirty bit\n", __func__);
+ } else {
+ // hugepage allocation failed. skip these tests
+ ksft_test_result_skip("Test %s huge page allocation\n", __func__);
+ ksft_test_result_skip("Test %s huge page dirty bit\n", __func__);
+ }
+ free(map);
+}
+
+int main(int argc, char **argv)
+{
+ int pagemap_fd;
+ int pagesize;
+
+ ksft_print_header();
+ ksft_set_plan(5);
+
+ pagemap_fd = open(PAGEMAP_FILE_PATH, O_RDONLY);
+ if (pagemap_fd < 0)
+ ksft_exit_fail_msg("Failed to open %s\n", PAGEMAP_FILE_PATH);
+
+ pagesize = getpagesize();
+
+ test_simple(pagemap_fd, pagesize);
+ test_vma_reuse(pagemap_fd, pagesize);
+ test_hugepage(pagemap_fd, pagesize);
+
+ close(pagemap_fd);
+
+ return ksft_exit_pass();
+}
_
Patches currently in -mm which might be from krisman@collabora.com are
selftests-vm-add-test-for-soft-dirty-pte-bit.patch
next reply other threads:[~2022-04-20 21:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-20 21:59 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-02-25 7:02 + selftests-vm-add-test-for-soft-dirty-pte-bit.patch added to -mm tree Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220420215949.0BAD2C385A0@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=krisman@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=usama.anjum@collabora.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.