From: Dipen Patel <dipenp@nvidia.com>
To: <thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<smangipudi@nvidia.com>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<warthog618@gmail.com>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <robh+dt@kernel.org>
Cc: Dipen Patel <dipenp@nvidia.com>
Subject: [PATCH v6 06/10] gpio: tegra186: Add HTE in gpio-tegra186 driver
Date: Fri, 22 Apr 2022 13:52:17 -0700 [thread overview]
Message-ID: <20220422205221.952-7-dipenp@nvidia.com> (raw)
In-Reply-To: <20220422205221.952-1-dipenp@nvidia.com>
Tegra194 AON GPIO controller with the use of its internal hardware
timestamping engine (HTE) also known as GTE can timestamp GPIO
lines through system counter. This patch implements enable/disable
callbacks for the GPIO controller. In enable call, it will set
timestamp function bit and GPIO line rising/falling edges in the
config register. In disable call, it restores the state.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
---
Changes in v4:
- Added edge setup and hardware timestamping enable/disable APIs.
drivers/gpio/gpio-tegra186.c | 81 +++++++++++++++++++++++++++++++++++-
1 file changed, 80 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 031fe105b58e..6a6852b4785e 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2016-2017 NVIDIA Corporation
+ * Copyright (c) 2016-2022 NVIDIA Corporation
*
* Author: Thierry Reding <treding@nvidia.com>
+ * Dipen Patel <dpatel@nvidia.com>
*/
#include <linux/gpio/driver.h>
@@ -11,6 +12,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/hte.h>
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/gpio/tegra194-gpio.h>
@@ -36,6 +38,7 @@
#define TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL BIT(4)
#define TEGRA186_GPIO_ENABLE_CONFIG_DEBOUNCE BIT(5)
#define TEGRA186_GPIO_ENABLE_CONFIG_INTERRUPT BIT(6)
+#define TEGRA186_GPIO_ENABLE_CONFIG_TIMESTAMP_FUNC BIT(7)
#define TEGRA186_GPIO_DEBOUNCE_CONTROL 0x04
#define TEGRA186_GPIO_DEBOUNCE_CONTROL_THRESHOLD(x) ((x) & 0xff)
@@ -76,6 +79,7 @@ struct tegra_gpio_soc {
const struct tegra186_pin_range *pin_ranges;
unsigned int num_pin_ranges;
const char *pinmux;
+ bool has_gte;
};
struct tegra_gpio {
@@ -194,6 +198,76 @@ static int tegra186_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
+#define HTE_BOTH_EDGES (HTE_RISING_EDGE_TS | HTE_FALLING_EDGE_TS)
+
+static int tegra186_gpio_en_hw_ts(struct gpio_chip *gc, u32 offset,
+ unsigned long flags)
+{
+ struct tegra_gpio *gpio;
+ void __iomem *base;
+ int value;
+
+ if (!gc)
+ return -EINVAL;
+
+ gpio = gpiochip_get_data(gc);
+ if (!gpio)
+ return -ENODEV;
+
+ base = tegra186_gpio_get_base(gpio, offset);
+ if (WARN_ON(base == NULL))
+ return -EINVAL;
+
+ value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_TIMESTAMP_FUNC;
+
+ if (flags == HTE_BOTH_EDGES) {
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE;
+ } else if (flags == HTE_RISING_EDGE_TS) {
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
+ } else if (flags == HTE_FALLING_EDGE_TS) {
+ value |= TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+ }
+
+ writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+ return 0;
+}
+
+static int tegra186_gpio_dis_hw_ts(struct gpio_chip *gc, u32 offset,
+ unsigned long flags)
+{
+ struct tegra_gpio *gpio;
+ void __iomem *base;
+ int value;
+
+ if (!gc)
+ return -EINVAL;
+
+ gpio = gpiochip_get_data(gc);
+ if (!gpio)
+ return -ENODEV;
+
+ base = tegra186_gpio_get_base(gpio, offset);
+ if (WARN_ON(base == NULL))
+ return -EINVAL;
+
+ value = readl(base + TEGRA186_GPIO_ENABLE_CONFIG);
+ value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TIMESTAMP_FUNC;
+ if (flags == HTE_BOTH_EDGES) {
+ value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_DOUBLE_EDGE;
+ } else if (flags == HTE_RISING_EDGE_TS) {
+ value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+ value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL;
+ } else if (flags == HTE_FALLING_EDGE_TS) {
+ value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_SINGLE_EDGE;
+ }
+ writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG);
+
+ return 0;
+}
+
static int tegra186_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct tegra_gpio *gpio = gpiochip_get_data(chip);
@@ -726,6 +800,10 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
gpio->gpio.set = tegra186_gpio_set;
gpio->gpio.set_config = tegra186_gpio_set_config;
gpio->gpio.add_pin_ranges = tegra186_gpio_add_pin_ranges;
+ if (gpio->soc->has_gte) {
+ gpio->gpio.en_hw_timestamp = tegra186_gpio_en_hw_ts;
+ gpio->gpio.dis_hw_timestamp = tegra186_gpio_dis_hw_ts;
+ }
gpio->gpio.base = -1;
@@ -977,6 +1055,7 @@ static const struct tegra_gpio_soc tegra194_aon_soc = {
.name = "tegra194-gpio-aon",
.instance = 1,
.num_irqs_per_bank = 8,
+ .has_gte = true,
};
#define TEGRA234_MAIN_GPIO_PORT(_name, _bank, _port, _pins) \
--
2.17.1
next prev parent reply other threads:[~2022-04-22 22:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-22 20:52 [PATCH v6 00/10] Intro to Hardware timestamping engine Dipen Patel
2022-04-22 20:52 ` [PATCH v6 01/10] Documentation: Add HTE subsystem guide Dipen Patel
2022-04-22 20:52 ` [PATCH v6 02/10] drivers: Add hardware timestamp engine (HTE) Dipen Patel
2022-04-22 20:52 ` [PATCH v6 03/10] hte: Add tegra194 HTE kernel provider Dipen Patel
2022-04-22 20:52 ` [PATCH v6 04/10] dt-bindings: Add HTE bindings Dipen Patel
2022-04-25 21:54 ` Rob Herring
2022-04-22 20:52 ` [PATCH v6 05/10] gpiolib: Add HTE support Dipen Patel
2022-04-22 20:52 ` Dipen Patel [this message]
2022-04-22 20:52 ` [PATCH v6 07/10] gpiolib: cdev: Add hardware timestamp clock type Dipen Patel
2022-04-22 20:52 ` [PATCH v6 08/10] tools: gpio: Add new hardware " Dipen Patel
2022-04-22 20:52 ` [PATCH v6 09/10] hte: Add tegra HTE test driver Dipen Patel
2022-04-22 20:52 ` [PATCH v6 10/10] MAINTAINERS: Added HTE Subsystem Dipen Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220422205221.952-7-dipenp@nvidia.com \
--to=dipenp@nvidia.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=smangipudi@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=warthog618@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.