All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Priyanka Jain <priyanka.jain@nxp.com>, Sinan Akman <sinan@writeme.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH] board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card
Date: Wed, 27 Apr 2022 16:13:17 +0200	[thread overview]
Message-ID: <20220427141317.18962-1-pali@kernel.org> (raw)

From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card,
Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards.

So address mapping for TDM-PMC card on LBC should not be enabled on any
other P1/P2 RDB board as there is no device at that TDM-PMC address.

Support for P1021RDB and P1025RDB boards was already removed from mainline
U-Boot in commits 6d1dd76afe85 ("board/freescale: Remove P1021RDB board
support") and d521cece5adb ("board/freescale: Remove P1025RDB board
support").

So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and
remove all macros related to TDM-PMC address mappings.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 board/freescale/p1_p2_rdb_pc/law.c | 1 -
 board/freescale/p1_p2_rdb_pc/tlb.c | 3 ---
 include/configs/p1_p2_rdb_pc.h     | 9 ---------
 scripts/config_whitelist.txt       | 4 ----
 4 files changed, 17 deletions(-)

diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 5f4d713ca569..6bdfb356eede 100644
--- a/board/freescale/p1_p2_rdb_pc/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -9,7 +9,6 @@
 
 struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
 #ifdef CONFIG_VSC7385_ENET
 	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 #endif
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index 5931ec650bd8..13f3a1edf68d 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -65,9 +65,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 6, BOOKE_PAGESZ_1M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 10, BOOKE_PAGESZ_64K, 1),
 #endif /* not SPL */
 
 #ifdef CONFIG_SYS_NAND_BASE
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 50ce2d9aaed4..9102dd819731 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -247,7 +247,6 @@
  * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
  *   (early boot only)
  * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
- * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
  * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
  * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
@@ -359,14 +358,6 @@
 					BR_PS_8 | BR_V)
 #define CONFIG_CPLD_OR_PRELIM	(0xfff009f7)
 
-#define CONFIG_SYS_PMC_BASE	0xff980000
-#define CONFIG_SYS_PMC_BASE_PHYS	CONFIG_SYS_PMC_BASE
-#define CONFIG_PMC_BR_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
-					BR_PS_8 | BR_V)
-#define CONFIG_PMC_OR_PRELIM	(OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
-				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
-				 OR_GPCM_EAD)
-
 /* Vsc7385 switch */
 #ifdef CONFIG_VSC7385_ENET
 #define __VSCFW_ADDR			"vscfw_addr=ef000000\0"
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a6bc234f51ed..33f6d73d3c58 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -637,8 +637,6 @@ CONFIG_PHY_RESET_DELAY
 CONFIG_PL011_CLOCK
 CONFIG_PL01x_PORTS
 CONFIG_PM
-CONFIG_PMC_BR_PRELIM
-CONFIG_PMC_OR_PRELIM
 CONFIG_PME_PLAT_CLK_DIV
 CONFIG_PMU
 CONFIG_PMW_BASE
@@ -1796,8 +1794,6 @@ CONFIG_SYS_PLL_FDR
 CONFIG_SYS_PLL_ODR
 CONFIG_SYS_PLL_SETTLING_TIME
 CONFIG_SYS_PMAN
-CONFIG_SYS_PMC_BASE
-CONFIG_SYS_PMC_BASE_PHYS
 CONFIG_SYS_PME_CLK
 CONFIG_SYS_POST_MEMORY
 CONFIG_SYS_POST_MEM_REGIONS
-- 
2.20.1


             reply	other threads:[~2022-04-27 14:13 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-27 14:13 Pali Rohár [this message]
2022-06-23 16:22 ` [PATCH v2] board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC card Pali Rohár
2022-06-28 17:44   ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220427141317.18962-1-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=priyanka.jain@nxp.com \
    --cc=sinan@writeme.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.