Re: [PATCH v3 2/8] dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for r9a06g032

[Herve Codina <herve.codina@bootlin.com>]

Hi Geert,

On Wed, 27 Apr 2022 17:15:15 +0200
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Hervé,
> 
> On Fri, Apr 22, 2022 at 2:09 PM Herve Codina <herve.codina@bootlin.com> wrote:
> > Add internal PCI bridge support for the r9a06g032 SOC. The Renesas
> > RZ/N1D (R9A06G032) internal PCI bridge is compatible with the one
> > present in the R-Car Gen2 family.
> > Compared to the R-Car Gen2 family, it needs three clocks instead of
> > one.
> >
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>  
> 
> Thanks for your patch!
> 
> > --- a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
> > +++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
> > @@ -113,6 +113,37 @@ required:
> >    - "#size-cells"
> >    - "#interrupt-cells"
> >
> > +if:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - renesas,pci-rzn1
> > +
> > +then:
> > +  properties:
> > +    clocks:
> > +      items:
> > +        - description: Internal bus clock (AHB) for HOST
> > +        - description: Internal bus clock (AHB) Power Management
> > +        - description: PCI clock for USB subsystem
> > +    clock-names:
> > +      items:
> > +        - const: hclk_usbh
> > +        - const: hclk_usbpm
> > +        - const: clk_pci_usb  
> 
> These are the provider names.
> I think they should use the consumer names: usb_hclkh, usb_hclkpm,
> and usb_pciclk.

Yes, it makes sense.
I will changed in v4.

> 
> The rest looks good to me.

Perfect.

Thanks for the review,
Hervé


-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com