[net 12/15] net/mlx5e: Fix trust state reset in reload

[Saeed Mahameed <saeedm@nvidia.com>]

From: Moshe Tal <moshet@nvidia.com>

Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.

Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.

Fixes: 2a5e7a1344f4 ("net/mlx5e: Add dcbnl dscp to priority support")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index d659fe07d464..8ead2c82a52a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -1200,6 +1200,16 @@ static int mlx5e_trust_initialize(struct mlx5e_priv *priv)
 		return err;
 	WRITE_ONCE(priv->dcbx_dp.trust_state, trust_state);
 
+	if (priv->dcbx_dp.trust_state == MLX5_QPTS_TRUST_PCP && priv->dcbx.dscp_app_cnt) {
+		/*
+		 * Align the driver state with the register state.
+		 * Temporary state change is required to enable the app list reset.
+		 */
+		priv->dcbx_dp.trust_state = MLX5_QPTS_TRUST_DSCP;
+		mlx5e_dcbnl_delete_app(priv);
+		priv->dcbx_dp.trust_state = MLX5_QPTS_TRUST_PCP;
+	}
+
 	mlx5e_params_calc_trust_tx_min_inline_mode(priv->mdev, &priv->channels.params,
 						   priv->dcbx_dp.trust_state);
 
-- 
2.35.1