From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org, pali@kernel.org,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 5.10 2/2] PCI: aardvark: Fix reading MSI interrupt number
Date: Wed, 4 May 2022 16:08:36 +0200 [thread overview]
Message-ID: <20220504140836.11115-2-kabel@kernel.org> (raw)
In-Reply-To: <20220504140836.11115-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
[ Upstream commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 ]
In advk_pcie_handle_msi() the authors expect that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.
Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.
Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.
Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
As explained in https://lore.kernel.org/stable/20220503205434.25275-2-kabel@kernel.org/
for 4.14, this needs to be applied ASAP to stable, since another commit was put into
stable that breaks this driver.
Thx :)
---
drivers/pci/controller/pci-aardvark.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 61c0e1090875..0c603e069f21 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1388,7 +1388,7 @@ static void advk_pcie_remove_irq_domain(struct advk_pcie *pcie)
static void advk_pcie_handle_msi(struct advk_pcie *pcie)
{
u32 msi_val, msi_mask, msi_status, msi_idx;
- u16 msi_data;
+ int virq;
msi_mask = advk_readl(pcie, PCIE_MSI_MASK_REG);
msi_val = advk_readl(pcie, PCIE_MSI_STATUS_REG);
@@ -1398,13 +1398,9 @@ static void advk_pcie_handle_msi(struct advk_pcie *pcie)
if (!(BIT(msi_idx) & msi_status))
continue;
- /*
- * msi_idx contains bits [4:0] of the msi_data and msi_data
- * contains 16bit MSI interrupt number
- */
advk_writel(pcie, BIT(msi_idx), PCIE_MSI_STATUS_REG);
- msi_data = advk_readl(pcie, PCIE_MSI_PAYLOAD_REG) & PCIE_MSI_DATA_MASK;
- generic_handle_irq(msi_data);
+ virq = irq_find_mapping(pcie->msi_inner_domain, msi_idx);
+ generic_handle_irq(virq);
}
advk_writel(pcie, PCIE_ISR0_MSI_INT_PENDING,
--
2.35.1
prev parent reply other threads:[~2022-05-04 14:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 14:08 [PATCH 5.10 1/2] PCI: aardvark: Clear all MSIs at setup Marek Behún
2022-05-04 14:08 ` Marek Behún [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220504140836.11115-2-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=pali@kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.