All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org, pali@kernel.org,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 5.15 24/30] PCI: aardvark: Add support for PME interrupts
Date: Wed,  4 May 2022 18:57:49 +0200	[thread overview]
Message-ID: <20220504165755.30002-25-kabel@kernel.org> (raw)
In-Reply-To: <20220504165755.30002-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

commit 0fc75d87454195885bd1a81fc7e6ce92572b6109 upstream.

Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does
nothing. This is because PCIe PME driver expects to receive PCIe interrupt
defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not
trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom
aardvark interrupt which this driver is not processing yet.

Fix this issue by handling PME interrupt in advk_pcie_handle_int() and
chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since
aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver
finally starts receiving PME interrupt.

Link: https://lore.kernel.org/r/20220110015018.26359-17-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index ba641dc84bd3..42b6f9e2c043 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1480,6 +1480,18 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
 	isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
 	isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
 
+	/* Process PME interrupt */
+	if (isr0_status & PCIE_MSG_PM_PME_MASK) {
+		/*
+		 * Do not clear PME interrupt bit in ISR0, it is cleared by IRQ
+		 * receiver by writing to the PCI_EXP_RTSTA register of emulated
+		 * root bridge. Aardvark HW returns zero for PCI_EXP_FLAGS_IRQ,
+		 * so use PCIe interrupt 0.
+		 */
+		if (generic_handle_domain_irq(pcie->irq_domain, 0) == -EINVAL)
+			dev_err_ratelimited(&pcie->pdev->dev, "unhandled PME IRQ\n");
+	}
+
 	/* Process ERR interrupt */
 	if (isr0_status & PCIE_ISR0_ERR_MASK) {
 		advk_writel(pcie, PCIE_ISR0_ERR_MASK, PCIE_ISR0_REG);
-- 
2.35.1


  parent reply	other threads:[~2022-05-04 17:18 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-04 16:57 [PATCH 5.15 00/30] PCIe Aardvark controller backports for 5.15 Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 01/30] PCI: pci-bridge-emul: Add description for class_revision field Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 02/30] PCI: pci-bridge-emul: Add definitions for missing capabilities registers Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 03/30] PCI: aardvark: Add support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers on emulated bridge Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 04/30] PCI: aardvark: Clear all MSIs at setup Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 05/30] PCI: aardvark: Comment actions in driver remove method Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 06/30] PCI: aardvark: Disable bus mastering when unbinding driver Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 07/30] PCI: aardvark: Mask all interrupts " Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 08/30] PCI: aardvark: Fix memory leak in driver unbind Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 09/30] PCI: aardvark: Assert PERST# when unbinding driver Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 10/30] PCI: aardvark: Disable link training " Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 11/30] PCI: aardvark: Disable common PHY " Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 12/30] PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_* Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 13/30] PCI: aardvark: Rewrite IRQ code to chained IRQ handler Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 14/30] PCI: aardvark: Check return value of generic_handle_domain_irq() when processing INTx IRQ Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 15/30] PCI: aardvark: Make MSI irq_chip structures static driver structures Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 16/30] PCI: aardvark: Make msi_domain_info structure a static driver structure Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 17/30] PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node) Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 18/30] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 19/30] PCI: aardvark: Add support for masking MSI interrupts Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 20/30] PCI: aardvark: Fix setting MSI address Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 21/30] PCI: aardvark: Enable MSI-X support Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 22/30] PCI: aardvark: Add support for ERR interrupt on emulated bridge Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 23/30] PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME " Marek Behún
2022-05-04 16:57 ` Marek Behún [this message]
2022-05-04 16:57 ` [PATCH 5.15 25/30] PCI: aardvark: Fix support for PME requester " Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 26/30] PCI: aardvark: Use separate INTA interrupt for emulated root bridge Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 27/30] PCI: aardvark: Remove irq_mask_ack() callback for INTx interrupts Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 28/30] PCI: aardvark: Don't mask irq when mapping Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 29/30] PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy() Marek Behún
2022-05-04 16:57 ` [PATCH 5.15 30/30] PCI: aardvark: Update comment about link going down after link-up Marek Behún
2022-05-10 12:06 ` [PATCH 5.15 00/30] PCIe Aardvark controller backports for 5.15 Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220504165755.30002-25-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=pali@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.