From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, trond.myklebust@hammerspace.com,
mgorman@techsingularity.net, linmiaohe@huawei.com,
hughd@google.com, hch@lst.de, geert+renesas@glider.be,
dhowells@redhat.com, neilb@suse.de, akpm@linux-foundation.org
Subject: [merged mm-stable] mm-handle-thp-in-swap_page_fs.patch removed from -mm tree
Date: Mon, 09 May 2022 21:15:18 -0700 [thread overview]
Message-ID: <20220510041519.34F6CC385A6@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm: handle THP in swap_*page_fs()
has been removed from the -mm tree. Its filename was
mm-handle-thp-in-swap_page_fs.patch
This patch was dropped because it was merged into mm-stable
------------------------------------------------------
From: NeilBrown <neilb@suse.de>
Subject: mm: handle THP in swap_*page_fs()
Pages passed to swap_readpage()/swap_writepage() are not necessarily all
the same size - there may be transparent-huge-pages involves.
The BIO paths of swap_*page() handle this correctly, but the SWP_FS_OPS
path does not.
So we need to use thp_size() to find the size, not just assume PAGE_SIZE,
and we need to track the total length of the request, not just assume it
is "page * PAGE_SIZE".
Link: https://lkml.kernel.org/r/165119301488.15698.9457662928942765453.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/page_io.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
--- a/mm/page_io.c~mm-handle-thp-in-swap_page_fs
+++ a/mm/page_io.c
@@ -239,6 +239,7 @@ struct swap_iocb {
struct kiocb iocb;
struct bio_vec bvec[SWAP_CLUSTER_MAX];
int pages;
+ int len;
};
static mempool_t *sio_pool;
@@ -261,7 +262,7 @@ static void sio_write_complete(struct ki
struct page *page = sio->bvec[0].bv_page;
int p;
- if (ret != PAGE_SIZE * sio->pages) {
+ if (ret != sio->len) {
/*
* In the case of swap-over-nfs, this can be a
* temporary failure if the system has limited
@@ -301,7 +302,7 @@ static int swap_writepage_fs(struct page
sio = *wbc->swap_plug;
if (sio) {
if (sio->iocb.ki_filp != swap_file ||
- sio->iocb.ki_pos + sio->pages * PAGE_SIZE != pos) {
+ sio->iocb.ki_pos + sio->len != pos) {
swap_write_unplug(sio);
sio = NULL;
}
@@ -312,10 +313,12 @@ static int swap_writepage_fs(struct page
sio->iocb.ki_complete = sio_write_complete;
sio->iocb.ki_pos = pos;
sio->pages = 0;
+ sio->len = 0;
}
sio->bvec[sio->pages].bv_page = page;
- sio->bvec[sio->pages].bv_len = PAGE_SIZE;
+ sio->bvec[sio->pages].bv_len = thp_size(page);
sio->bvec[sio->pages].bv_offset = 0;
+ sio->len += thp_size(page);
sio->pages += 1;
if (sio->pages == ARRAY_SIZE(sio->bvec) || !wbc->swap_plug) {
swap_write_unplug(sio);
@@ -371,8 +374,7 @@ void swap_write_unplug(struct swap_iocb
struct address_space *mapping = sio->iocb.ki_filp->f_mapping;
int ret;
- iov_iter_bvec(&from, WRITE, sio->bvec, sio->pages,
- PAGE_SIZE * sio->pages);
+ iov_iter_bvec(&from, WRITE, sio->bvec, sio->pages, sio->len);
ret = mapping->a_ops->swap_rw(&sio->iocb, &from);
if (ret != -EIOCBQUEUED)
sio_write_complete(&sio->iocb, ret);
@@ -383,7 +385,7 @@ static void sio_read_complete(struct kio
struct swap_iocb *sio = container_of(iocb, struct swap_iocb, iocb);
int p;
- if (ret == PAGE_SIZE * sio->pages) {
+ if (ret == sio->len) {
for (p = 0; p < sio->pages; p++) {
struct page *page = sio->bvec[p].bv_page;
@@ -415,7 +417,7 @@ static void swap_readpage_fs(struct page
sio = *plug;
if (sio) {
if (sio->iocb.ki_filp != sis->swap_file ||
- sio->iocb.ki_pos + sio->pages * PAGE_SIZE != pos) {
+ sio->iocb.ki_pos + sio->len != pos) {
swap_read_unplug(sio);
sio = NULL;
}
@@ -426,10 +428,12 @@ static void swap_readpage_fs(struct page
sio->iocb.ki_pos = pos;
sio->iocb.ki_complete = sio_read_complete;
sio->pages = 0;
+ sio->len = 0;
}
sio->bvec[sio->pages].bv_page = page;
- sio->bvec[sio->pages].bv_len = PAGE_SIZE;
+ sio->bvec[sio->pages].bv_len = thp_size(page);
sio->bvec[sio->pages].bv_offset = 0;
+ sio->len += thp_size(page);
sio->pages += 1;
if (sio->pages == ARRAY_SIZE(sio->bvec) || !plug) {
swap_read_unplug(sio);
@@ -521,8 +525,7 @@ void __swap_read_unplug(struct swap_iocb
struct address_space *mapping = sio->iocb.ki_filp->f_mapping;
int ret;
- iov_iter_bvec(&from, READ, sio->bvec, sio->pages,
- PAGE_SIZE * sio->pages);
+ iov_iter_bvec(&from, READ, sio->bvec, sio->pages, sio->len);
ret = mapping->a_ops->swap_rw(&sio->iocb, &from);
if (ret != -EIOCBQUEUED)
sio_read_complete(&sio->iocb, ret);
_
Patches currently in -mm which might be from neilb@suse.de are
mm-discard-__gfp_atomic.patch
reply other threads:[~2022-05-10 4:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220510041519.34F6CC385A6@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=dhowells@redhat.com \
--cc=geert+renesas@glider.be \
--cc=hch@lst.de \
--cc=hughd@google.com \
--cc=linmiaohe@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@techsingularity.net \
--cc=mm-commits@vger.kernel.org \
--cc=neilb@suse.de \
--cc=trond.myklebust@hammerspace.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.