[PATCH 4/5] serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTS

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set
in the else block so clearing it is unnecessary.

While at it, remove also one pair of extra parenthesis.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/fsl_lpuart.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 75b3c36c13bc..d3bb46cb7185 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2110,12 +2110,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (sport->port.rs485.flags & SER_RS485_ENABLED)
 		termios->c_cflag &= ~CRTSCTS;
 
-	if (termios->c_cflag & CRTSCTS) {
-		modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
-	} else {
-		termios->c_cflag &= ~CRTSCTS;
+	if (termios->c_cflag & CRTSCTS)
+		modem |= UARTMODIR_RXRTSE | UARTMODIR_TXCTSE;
+	else
 		modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
-	}
 
 	if (termios->c_cflag & CSTOPB)
 		bd |= UARTBAUD_SBNS;
-- 
2.30.2