From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Marc Zyngier <maz@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Jonathan Corbet <corbet@lwn.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andy@kernel.org>
Subject: [PATCH v1 3/5] pinctrl: baytrail: make irq_chip immutable
Date: Thu, 12 May 2022 20:39:19 +0300 [thread overview]
Message-ID: <20220512173921.8210-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220512173921.8210-1-andriy.shevchenko@linux.intel.com>
Since recently, the kernel is nagging about mutable irq_chips:
"not an immutable chip, please consider fixing it!"
Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.
While at it, switch to use hwirq variable instead of offset for
the sake of consistency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 42 ++++++++++++++----------
1 file changed, 25 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index f89c9fcd4e1b..31f8f271628c 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1350,15 +1350,15 @@ static void byt_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
- unsigned int offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
void __iomem *reg;
- reg = byt_gpio_reg(vg, offset, BYT_INT_STAT_REG);
+ reg = byt_gpio_reg(vg, hwirq, BYT_INT_STAT_REG);
if (!reg)
return;
raw_spin_lock(&byt_lock);
- writel(BIT(offset % 32), reg);
+ writel(BIT(hwirq % 32), reg);
raw_spin_unlock(&byt_lock);
}
@@ -1366,20 +1366,24 @@ static void byt_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
- byt_gpio_clear_triggering(vg, irqd_to_hwirq(d));
+ byt_gpio_clear_triggering(vg, hwirq);
+ gpiochip_disable_irq(gc, hwirq);
}
static void byt_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct intel_pinctrl *vg = gpiochip_get_data(gc);
- unsigned int offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
unsigned long flags;
void __iomem *reg;
u32 value;
- reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+ gpiochip_enable_irq(gc, hwirq);
+
+ reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG);
if (!reg)
return;
@@ -1412,12 +1416,13 @@ static void byt_irq_unmask(struct irq_data *d)
static int byt_irq_type(struct irq_data *d, unsigned int type)
{
struct intel_pinctrl *vg = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- u32 offset = irqd_to_hwirq(d);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
u32 value;
unsigned long flags;
- void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+ void __iomem *reg;
- if (!reg || offset >= vg->chip.ngpio)
+ reg = byt_gpio_reg(vg, hwirq, BYT_CONF0_REG);
+ if (!reg)
return -EINVAL;
raw_spin_lock_irqsave(&byt_lock, flags);
@@ -1447,6 +1452,16 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
return 0;
}
+static const struct irq_chip byt_gpio_irq_chip = {
+ .name = "BYT-GPIO",
+ .irq_ack = byt_irq_ack,
+ .irq_mask = byt_irq_mask,
+ .irq_unmask = byt_irq_unmask,
+ .irq_set_type = byt_irq_type,
+ .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED | IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
static void byt_gpio_irq_handler(struct irq_desc *desc)
{
struct irq_data *data = irq_desc_get_irq_data(desc);
@@ -1633,15 +1648,8 @@ static int byt_gpio_probe(struct intel_pinctrl *vg)
if (irq > 0) {
struct gpio_irq_chip *girq;
- vg->irqchip.name = "BYT-GPIO",
- vg->irqchip.irq_ack = byt_irq_ack,
- vg->irqchip.irq_mask = byt_irq_mask,
- vg->irqchip.irq_unmask = byt_irq_unmask,
- vg->irqchip.irq_set_type = byt_irq_type,
- vg->irqchip.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_SET_TYPE_MASKED,
-
girq = &gc->irq;
- girq->chip = &vg->irqchip;
+ gpio_irq_chip_set_chip(girq, &byt_gpio_irq_chip);
girq->init_hw = byt_gpio_irq_init_hw;
girq->init_valid_mask = byt_init_irq_valid_mask;
girq->parent_handler = byt_gpio_irq_handler;
--
2.35.1
next prev parent reply other threads:[~2022-05-12 17:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 17:39 [PATCH v1 1/5] Documentation: gpio: Fix IRQ mask and unmask examples Andy Shevchenko
2022-05-12 17:39 ` [PATCH v1 2/5] Documentation: gpio: Advertise irqd_to_hwirq() helper in the examples Andy Shevchenko
2022-05-13 20:53 ` Linus Walleij
2022-05-12 17:39 ` Andy Shevchenko [this message]
2022-05-13 8:51 ` [PATCH v1 3/5] pinctrl: baytrail: make irq_chip immutable Mika Westerberg
2022-05-12 17:39 ` [PATCH v1 4/5] pinctrl: cherryview: " Andy Shevchenko
2022-05-13 8:52 ` Mika Westerberg
2022-05-12 17:39 ` [PATCH v1 5/5] pinctrl: lynxpoint: " Andy Shevchenko
2022-05-13 8:52 ` Mika Westerberg
2022-05-13 20:54 ` [PATCH v1 1/5] Documentation: gpio: Fix IRQ mask and unmask examples Linus Walleij
2022-05-16 17:22 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512173921.8210-3-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=brgl@bgdev.pl \
--cc=corbet@lwn.net \
--cc=hdegoede@redhat.com \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.