From: Andrew Abbott <andrew@mirx.dev>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Johan Jonker <jbx6244@gmail.com>, Simon Glass <sjg@chromium.org>,
Samuel Dionne-Riel <samuel@dionne-riel.com>,
Peter Robinson <pbrobinson@gmail.com>,
Kever Yang <kever.yang@rock-chips.com>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
Andrew Abbott <andrew@mirx.dev>,
Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Subject: [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images
Date: Mon, 16 May 2022 21:07:06 +1000 [thread overview]
Message-ID: <20220516110712.178958-3-andrew@mirx.dev> (raw)
In-Reply-To: <20220516110712.178958-1-andrew@mirx.dev>
Currently, building for Rockchip targets produces:
- idbloader.img
- rksd-formatted TPL with SPL appended; or
- rksd-formatted SPL
- u-boot.itb
- U-Boot Proper FIT image
- u-boot-rockchip.bin
- idbloader.img + u-boot.itb, padded the correct amount for SD/MMC
usage.
For RK3399 targets:
- u-boot.rom
- SPI image specific to the bob Chromebook target (see
c4cea2bbf995764f325a907061c22ecd6768cf7b).
This commit adds binman definitions to produce these images:
- idbloader.img
- rksd-formatted [TPL + ] SPL, as before.
- u-boot-rockchip.bin
- [TPL + ] SPL all rksd-formatted + u-boot.itb padded for SD/MMC
usage, as before.
- u-boot-rockchip-spi.bin
- [TPL + ] SPL all rkspi-formatted + u-boot.itb padded for SPI
usage.
This commit also generalizes the CONFIG_ROCKCHIP_SPI_IMAGE config
setting - it now means to generate a generic SPI flash image, in
addition to the generic SD/MMC image.
Signed-off-by: Andrew Abbott <andrew@mirx.dev>
---
Question: Does this break/not play nicely with rockchip-optee
generation? It creates u-boot.itb for rk3288 targets. That would need to
run before what I've implemented here?
Changes in v2:
- Revert u-boot-rockchip-sdmmc.bin name to u-boot-rockchip.bin, to
keep the name the same as before.
- Fix whitespace issues.
arch/arm/dts/rockchip-u-boot.dtsi | 53 +++++++++++++++++++++++++++++--
arch/arm/mach-rockchip/Kconfig | 7 ++--
2 files changed, 53 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
index eae3ee715d..9354b0f5a7 100644
--- a/arch/arm/dts/rockchip-u-boot.dtsi
+++ b/arch/arm/dts/rockchip-u-boot.dtsi
@@ -13,17 +13,64 @@
#ifdef CONFIG_SPL
&binman {
- simple-bin {
+ sdmmc-idbloader {
+ filename = "idbloader.img";
+
+ mkimage {
+ args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
+
+#ifdef CONFIG_TPL
+ u-boot-tpl {};
+#endif
+ u-boot-spl {};
+ };
+ };
+
+ sdmmc-image {
filename = "u-boot-rockchip.bin";
pad-byte = <0xff>;
- blob {
+ idbloader {
filename = "idbloader.img";
+ type = "blob";
};
- u-boot-img {
+#ifdef CONFIG_ARM64
+ u-boot-fit {
+ filename = "u-boot.itb";
+ type = "blob";
offset = <CONFIG_SPL_PAD_TO>;
};
+#else
+ u-boot-img {};
+#endif
};
};
+
+#ifdef CONFIG_ROCKCHIP_SPI_IMAGE
+&binman {
+ spi-image {
+ filename = "u-boot-rockchip-spi.bin";
+ pad-byte = <0xff>;
+
+ mkimage {
+ args = "-n", CONFIG_SYS_SOC, "-T", "rkspi";
+
+#ifdef CONFIG_TPL
+ u-boot-tpl {};
+#endif
+ u-boot-spl {};
+ };
+
+#ifdef CONFIG_ARM64
+ blob {
+ filename = "u-boot.itb";
+ offset = <CONFIG_SYS_SPI_U_BOOT_OFFS>;
+ };
+#else
+ u-boot-img {};
#endif
+ };
+};
+#endif // CONFIG_ROCKCHIP_SPI_IMAGE
+#endif // CONFIG_SPL
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 18aff5480b..7149b9a530 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -415,12 +415,11 @@ config SPL_MMC
config ROCKCHIP_SPI_IMAGE
bool "Build a SPI image for rockchip"
- depends on HAS_ROM
help
Some Rockchip SoCs support booting from SPI flash. Enable this
- option to produce a 4MB SPI-flash image (called u-boot.rom)
- containing U-Boot. The image is built by binman. U-Boot sits near
- the start of the image.
+ option to produce an SPI-flash image (called u-boot-rockchip-spi.bin)
+ containing TPL (if enabled) and SPL, and U-Boot proper at the offset
+ CONFIG_SYS_SPI_U_BOOT_OFFS. The image is built by binman.
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
default SYS_TEXT_BASE
--
2.36.0
next prev parent reply other threads:[~2022-05-16 11:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 11:07 [RFC PATCH v2 0/8] Build Rockchip final images using binman Andrew Abbott
2022-05-16 11:07 ` [RFC PATCH v2 1/8] binman: mkimage: Support ':'-separated inputs Andrew Abbott
2022-05-19 11:36 ` Alper Nebi Yasak
2022-05-22 0:03 ` Andrew Abbott
2022-05-16 11:07 ` Andrew Abbott [this message]
2022-05-19 11:36 ` [RFC PATCH v2 2/8] rockchip: Add binman definitions for final images Alper Nebi Yasak
2022-05-22 0:55 ` Andrew Abbott
2022-05-29 16:31 ` Alper Nebi Yasak
2022-05-16 11:07 ` [RFC PATCH v2 3/8] soc: rockchip: Include common U-Boot dtsi file Andrew Abbott
2022-05-19 11:36 ` Alper Nebi Yasak
2022-05-16 11:07 ` [RFC PATCH v2 4/8] board: rockchip: Move SPI U-Boot offset to config Andrew Abbott
2022-05-19 11:36 ` Alper Nebi Yasak
2022-05-16 11:07 ` [RFC PATCH v2 5/8] rockchip: Remove obsolete Makefile targets Andrew Abbott
2022-05-16 11:07 ` [RFC PATCH v2 6/8] rockchip: Enable binman for ARM64 Andrew Abbott
2022-05-19 11:37 ` Alper Nebi Yasak
2022-05-22 1:27 ` Andrew Abbott
2022-05-16 11:07 ` [RFC PATCH v2 7/8] doc: rockchip: Update for new binman image generation Andrew Abbott
2022-05-16 11:07 ` [RFC PATCH v2 8/8] board: rockpro64: Enable building SPI image Andrew Abbott
2022-05-16 15:13 ` [RFC PATCH v2 0/8] Build Rockchip final images using binman Jerome Forissier
2022-05-19 9:59 ` Andrew Abbott
2022-05-19 11:35 ` Alper Nebi Yasak
2022-05-21 23:47 ` Andrew Abbott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516110712.178958-3-andrew@mirx.dev \
--to=andrew@mirx.dev \
--cc=jagan@amarulasolutions.com \
--cc=jbx6244@gmail.com \
--cc=kever.yang@rock-chips.com \
--cc=pbrobinson@gmail.com \
--cc=philipp.tomsich@theobroma-systems.com \
--cc=philipp.tomsich@vrull.eu \
--cc=samuel@dionne-riel.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.