From: Joyce Kong <joyce.kong@arm.com>
To: Jakub Grajciar <jgrajcia@cisco.com>
Cc: ruifeng.wang@arm.com, dev@dpdk.org, nd@arm.com,
Joyce Kong <joyce.kong@arm.com>
Subject: [PATCH v1 1/2] net/memif: add a Rx fast path
Date: Tue, 17 May 2022 10:51:08 +0000 [thread overview]
Message-ID: <20220517105109.1086090-2-joyce.kong@arm.com> (raw)
In-Reply-To: <20220517105109.1086090-1-joyce.kong@arm.com>
For memif non-zero-copy mode, there is a branch to compare
the mbuf and memif buffer size during memory copying. Add
a fast memory copy path by removing this branch with mbuf
and memif buffer size defined at compile time. The removal
of the branch leads to considerable performance uplift.
When memif <= buffer size, Rx chooses the fast memcpy path,
otherwise it would choose the original path.
Test with 1p1q on Ampere Altra AArch64 server,
--------------------------------------------
buf size | memif <= mbuf | memif > mbuf |
--------------------------------------------
non-zc gain | 4.30% | -0.52% |
--------------------------------------------
zc gain | 2.46% | 0.70% |
--------------------------------------------
Test with 1p1q on Cascade Lake Xeon X86server,
-------------------------------------------
buf size | memif <= mbuf | memif > mbuf |
-------------------------------------------
non-zc gain | 2.13% | -1.40% |
-------------------------------------------
zc gain | 0.18% | 0.48% |
-------------------------------------------
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
---
drivers/net/memif/rte_eth_memif.c | 124 ++++++++++++++++++++----------
1 file changed, 84 insertions(+), 40 deletions(-)
diff --git a/drivers/net/memif/rte_eth_memif.c b/drivers/net/memif/rte_eth_memif.c
index 587ad45576..f55776ca46 100644
--- a/drivers/net/memif/rte_eth_memif.c
+++ b/drivers/net/memif/rte_eth_memif.c
@@ -342,66 +342,111 @@ eth_memif_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
goto refill;
n_slots = last_slot - cur_slot;
- while (n_slots && n_rx_pkts < nb_pkts) {
- mbuf_head = rte_pktmbuf_alloc(mq->mempool);
- if (unlikely(mbuf_head == NULL))
- goto no_free_bufs;
- mbuf = mbuf_head;
- mbuf->port = mq->in_port;
+ if (likely(mbuf_size >= pmd->cfg.pkt_buffer_size)) {
+ while (n_slots && n_rx_pkts < nb_pkts) {
+ mbuf_head = rte_pktmbuf_alloc(mq->mempool);
+ if (unlikely(mbuf_head == NULL))
+ goto no_free_bufs;
+ mbuf = mbuf_head;
+ mbuf->port = mq->in_port;
+
+next_slot1:
+ s0 = cur_slot & mask;
+ d0 = &ring->desc[s0];
-next_slot:
- s0 = cur_slot & mask;
- d0 = &ring->desc[s0];
+ cp_len = d0->length;
- src_len = d0->length;
- dst_off = 0;
- src_off = 0;
+ rte_pktmbuf_data_len(mbuf) = cp_len;
+ rte_pktmbuf_pkt_len(mbuf) = cp_len;
+ if (mbuf != mbuf_head)
+ rte_pktmbuf_pkt_len(mbuf_head) += cp_len;
- do {
- dst_len = mbuf_size - dst_off;
- if (dst_len == 0) {
- dst_off = 0;
- dst_len = mbuf_size;
+ rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
+ (uint8_t *)memif_get_buffer(proc_private, d0), cp_len);
+
+ cur_slot++;
+ n_slots--;
- /* store pointer to tail */
+ if (d0->flags & MEMIF_DESC_FLAG_NEXT) {
mbuf_tail = mbuf;
mbuf = rte_pktmbuf_alloc(mq->mempool);
if (unlikely(mbuf == NULL))
goto no_free_bufs;
- mbuf->port = mq->in_port;
ret = memif_pktmbuf_chain(mbuf_head, mbuf_tail, mbuf);
if (unlikely(ret < 0)) {
MIF_LOG(ERR, "number-of-segments-overflow");
rte_pktmbuf_free(mbuf);
goto no_free_bufs;
}
+ goto next_slot1;
}
- cp_len = RTE_MIN(dst_len, src_len);
- rte_pktmbuf_data_len(mbuf) += cp_len;
- rte_pktmbuf_pkt_len(mbuf) = rte_pktmbuf_data_len(mbuf);
- if (mbuf != mbuf_head)
- rte_pktmbuf_pkt_len(mbuf_head) += cp_len;
+ mq->n_bytes += rte_pktmbuf_pkt_len(mbuf_head);
+ *bufs++ = mbuf_head;
+ n_rx_pkts++;
+ }
+ } else {
+ while (n_slots && n_rx_pkts < nb_pkts) {
+ mbuf_head = rte_pktmbuf_alloc(mq->mempool);
+ if (unlikely(mbuf_head == NULL))
+ goto no_free_bufs;
+ mbuf = mbuf_head;
+ mbuf->port = mq->in_port;
+
+next_slot2:
+ s0 = cur_slot & mask;
+ d0 = &ring->desc[s0];
- rte_memcpy(rte_pktmbuf_mtod_offset(mbuf, void *,
- dst_off),
- (uint8_t *)memif_get_buffer(proc_private, d0) +
- src_off, cp_len);
+ src_len = d0->length;
+ dst_off = 0;
+ src_off = 0;
- src_off += cp_len;
- dst_off += cp_len;
- src_len -= cp_len;
- } while (src_len);
+ do {
+ dst_len = mbuf_size - dst_off;
+ if (dst_len == 0) {
+ dst_off = 0;
+ dst_len = mbuf_size;
+
+ /* store pointer to tail */
+ mbuf_tail = mbuf;
+ mbuf = rte_pktmbuf_alloc(mq->mempool);
+ if (unlikely(mbuf == NULL))
+ goto no_free_bufs;
+ mbuf->port = mq->in_port;
+ ret = memif_pktmbuf_chain(mbuf_head, mbuf_tail, mbuf);
+ if (unlikely(ret < 0)) {
+ MIF_LOG(ERR, "number-of-segments-overflow");
+ rte_pktmbuf_free(mbuf);
+ goto no_free_bufs;
+ }
+ }
+ cp_len = RTE_MIN(dst_len, src_len);
- cur_slot++;
- n_slots--;
+ rte_pktmbuf_data_len(mbuf) += cp_len;
+ rte_pktmbuf_pkt_len(mbuf) = rte_pktmbuf_data_len(mbuf);
+ if (mbuf != mbuf_head)
+ rte_pktmbuf_pkt_len(mbuf_head) += cp_len;
- if (d0->flags & MEMIF_DESC_FLAG_NEXT)
- goto next_slot;
+ rte_memcpy(rte_pktmbuf_mtod_offset(mbuf, void *,
+ dst_off),
+ (uint8_t *)memif_get_buffer(proc_private, d0) +
+ src_off, cp_len);
- mq->n_bytes += rte_pktmbuf_pkt_len(mbuf_head);
- *bufs++ = mbuf_head;
- n_rx_pkts++;
+ src_off += cp_len;
+ dst_off += cp_len;
+ src_len -= cp_len;
+ } while (src_len);
+
+ cur_slot++;
+ n_slots--;
+
+ if (d0->flags & MEMIF_DESC_FLAG_NEXT)
+ goto next_slot2;
+
+ mq->n_bytes += rte_pktmbuf_pkt_len(mbuf_head);
+ *bufs++ = mbuf_head;
+ n_rx_pkts++;
+ }
}
no_free_bufs:
@@ -694,7 +739,6 @@ eth_memif_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
return n_tx_pkts;
}
-
static int
memif_tx_one_zc(struct pmd_process_private *proc_private, struct memif_queue *mq,
memif_ring_t *ring, struct rte_mbuf *mbuf, const uint16_t mask,
--
2.25.1
next prev parent reply other threads:[~2022-05-17 10:52 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 9:32 [RFC] net/memif: add a fast path for Rx Joyce Kong
2022-05-17 10:51 ` [PATCH v1 0/2] add a fast path for memif Rx/Tx Joyce Kong
2022-05-17 10:51 ` Joyce Kong [this message]
2022-05-18 16:53 ` [PATCH v1 1/2] net/memif: add a Rx fast path Ferruh Yigit
2022-05-19 7:00 ` Joyce Kong
2022-05-19 8:44 ` Joyce Kong
2022-05-18 17:06 ` Ferruh Yigit
2022-05-19 15:09 ` Joyce Kong
2022-05-19 16:38 ` Ferruh Yigit
2022-05-17 10:51 ` [PATCH v1 2/2] net/memif: add a Tx " Joyce Kong
2022-05-17 13:59 ` [PATCH v1 0/2] add a fast path for memif Rx/Tx Morten Brørup
2022-05-18 2:48 ` Ruifeng Wang
2022-07-01 10:28 ` [PATCH v2 " Joyce Kong
2022-07-01 10:28 ` [PATCH v2 1/2] net/memif: add a Rx fast path Joyce Kong
2022-07-01 16:51 ` Stephen Hemminger
2022-08-22 3:47 ` [PATCH v3 0/2] add a fast path for memif Rx/Tx Joyce Kong
2022-08-22 3:47 ` [PATCH v3 1/2] net/memif: add a Rx fast path Joyce Kong
2022-08-31 16:25 ` Stephen Hemminger
2022-09-07 6:06 ` Joyce Kong
2022-08-22 3:47 ` [PATCH v3 2/2] net/memif: add a Tx " Joyce Kong
2022-07-01 10:28 ` [PATCH v2 " Joyce Kong
2022-09-15 6:58 ` [PATCH v4 0/2] add a fast path for memif Rx/Tx Joyce Kong
2022-09-15 6:58 ` [PATCH v4 1/2] net/memif: add a Rx fast path Joyce Kong
2022-09-15 6:58 ` [PATCH v4 2/2] net/memif: add a Tx " Joyce Kong
2022-09-22 9:12 ` [PATCH v4 0/2] add a fast path for memif Rx/Tx Ferruh Yigit
2022-12-09 13:59 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220517105109.1086090-2-joyce.kong@arm.com \
--to=joyce.kong@arm.com \
--cc=dev@dpdk.org \
--cc=jgrajcia@cisco.com \
--cc=nd@arm.com \
--cc=ruifeng.wang@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.