diff for duplicates of <20220517134550.7c451a83@kernel.org> diff --git a/a/1.txt b/N1/1.txt index 80aa4db..893b47c 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -55,14 +55,14 @@ On Tue, 17 May 2022 16:23:16 +0200 Sven Anders wrote: > > I suspected the hardware offloading operations to be the cause, so I > > tried to disable them. It resulted in the following: > > -> > ?If I turn of the "ntuple-filters" with -> > ?? ethtool -K eth3 ntuple off -> > ?? ethtool -K eth3 ntuple off -> > ?it will work. +> > If I turn of the "ntuple-filters" with +> > ethtool -K eth3 ntuple off +> > ethtool -K eth3 ntuple off +> > it will work. > > -> > ?But if I do this I see the following errors in "dmesg": -> > ? i40e 0000:65:00.1: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on -> > ? i40e 0000:65:00.2: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on +> > But if I do this I see the following errors in "dmesg": +> > i40e 0000:65:00.1: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on +> > i40e 0000:65:00.2: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on > > > > Disabling any any other offloading operations made no change. > > @@ -90,20 +90,20 @@ On Tue, 17 May 2022 16:23:16 +0200 Sven Anders wrote: > > This is the hardware: > > --------------------- > > 4 port Ethernet controller: -> > ?Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02) -> > ?8086:15ff (rev 02) +> > Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02) +> > 8086:15ff (rev 02) > > > > with > > -> > ?driver: i40e -> > ?version: 5.15.35-core2 -> > ?firmware-version: 8.60 0x8000bd80 1.3140.0 -> > ?bus-info: 0000:65:00.2 -> > ?supports-statistics: yes -> > ?supports-test: yes -> > ?supports-eeprom-access: yes -> > ?supports-register-dump: yes -> > ?supports-priv-flags: yes +> > driver: i40e +> > version: 5.15.35-core2 +> > firmware-version: 8.60 0x8000bd80 1.3140.0 +> > bus-info: 0000:65:00.2 +> > supports-statistics: yes +> > supports-test: yes +> > supports-eeprom-access: yes +> > supports-register-dump: yes +> > supports-priv-flags: yes > > > > > > This is current bonding configuration: @@ -137,10 +137,10 @@ On Tue, 17 May 2022 16:23:16 +0200 Sven Anders wrote: > > > > > > Regards -> > ?Sven Anders +> > Sven Anders > > > > -> Mit freundlichen Gr??en +> Mit freundlichen Grüßen > Sven Anders > diff --git a/a/content_digest b/N1/content_digest index 55d4804..7f9a784 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,12 @@ "ref\0700118d5-2007-3c13-af2d-3a2a6c7775bd@anduras.de\0" "ref\0ad3e244d-2f87-c74b-1d40-c21e286a721c@anduras.de\0" "From\0Jakub Kicinski <kuba@kernel.org>\0" - "Subject\0[Intel-wired-lan] Bonding problem on Intel X710 hardware\0" + "Subject\0Re: Bonding problem on Intel X710 hardware\0" "Date\0Tue, 17 May 2022 13:45:50 -0700\0" - "To\0intel-wired-lan@osuosl.org\0" + "To\0Sven Anders <sven.anders@anduras.de>\0" + "Cc\0netdev <netdev@vger.kernel.org>" + intel-wired-lan@lists.osuosl.org + " Tony Nguyen <anthony.l.nguyen@intel.com>\0" "\00:1\0" "b\0" "CC: intel\n" @@ -63,14 +66,14 @@ "> > I suspected the hardware offloading operations to be the cause, so I\n" "> > tried to disable them. It resulted in the following:\n" "> > \n" - "> > ?If I turn of the \"ntuple-filters\" with\n" - "> > ?? ethtool -K eth3 ntuple off\n" - "> > ?? ethtool -K eth3 ntuple off\n" - "> > ?it will work.\n" + "> > \302\240If I turn of the \"ntuple-filters\" with\n" + "> > \302\240\302\240 ethtool -K eth3 ntuple off\n" + "> > \302\240\302\240 ethtool -K eth3 ntuple off\n" + "> > \302\240it will work.\n" "> > \n" - "> > ?But if I do this I see the following errors in \"dmesg\":\n" - "> > ? i40e 0000:65:00.1: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on\n" - "> > ? i40e 0000:65:00.2: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on\n" + "> > \302\240But if I do this I see the following errors in \"dmesg\":\n" + "> > \302\240 i40e 0000:65:00.1: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on\n" + "> > \302\240 i40e 0000:65:00.2: Error I40E_AQ_RC_EINVAL adding RX filters on PF, promiscuous mode forced on\n" "> > \n" "> > Disabling any any other offloading operations made no change.\n" "> > \n" @@ -98,20 +101,20 @@ "> > This is the hardware:\n" "> > ---------------------\n" "> > 4 port Ethernet controller:\n" - "> > ?Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)\n" - "> > ?8086:15ff (rev 02)\n" + "> > \302\240Intel Corporation Ethernet Controller X710 for 10GBASE-T (rev 02)\n" + "> > \302\2408086:15ff (rev 02)\n" "> > \n" "> > with\n" "> > \n" - "> > ?driver: i40e\n" - "> > ?version: 5.15.35-core2\n" - "> > ?firmware-version: 8.60 0x8000bd80 1.3140.0\n" - "> > ?bus-info: 0000:65:00.2\n" - "> > ?supports-statistics: yes\n" - "> > ?supports-test: yes\n" - "> > ?supports-eeprom-access: yes\n" - "> > ?supports-register-dump: yes\n" - "> > ?supports-priv-flags: yes\n" + "> > \302\240driver: i40e\n" + "> > \302\240version: 5.15.35-core2\n" + "> > \302\240firmware-version: 8.60 0x8000bd80 1.3140.0\n" + "> > \302\240bus-info: 0000:65:00.2\n" + "> > \302\240supports-statistics: yes\n" + "> > \302\240supports-test: yes\n" + "> > \302\240supports-eeprom-access: yes\n" + "> > \302\240supports-register-dump: yes\n" + "> > \302\240supports-priv-flags: yes\n" "> > \n" "> > \n" "> > This is current bonding configuration:\n" @@ -145,12 +148,12 @@ "> > \n" "> > \n" "> > Regards\n" - "> > ?Sven Anders\n" + "> > \302\240Sven Anders\n" "> > \n" "> \n" "> \n" - "> Mit freundlichen Gr??en\n" + "> Mit freundlichen Gr\303\274\303\237en\n" "> Sven Anders\n" > -302ca270041c4fe13699f978f57a31f4f4f23648d1c845ae860fda03cbc6ee6b +e226e9ae14ef0cfbb3ce6c210cf446fcdfdacb9f123209cbc0493d75a12b4451
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.