From: Peter Zijlstra <peterz@infradead.org>
To: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
llvm@lists.linux.dev, linux-kernel@vger.kernel.org,
kasan-dev@googlegroups.com
Subject: Re: objtool "no non-local symbols" error with tip of tree LLVM
Date: Wed, 18 May 2022 09:40:42 +0200 [thread overview]
Message-ID: <20220518074042.GA10117@worktop.programming.kicks-ass.net> (raw)
In-Reply-To: <20220518012429.4zqzarvwsraxivux@treble>
On Tue, May 17, 2022 at 06:24:29PM -0700, Josh Poimboeuf wrote:
> On Tue, May 17, 2022 at 05:42:04PM +0200, Peter Zijlstra wrote:
> > + for (;;) {
> > + symtab_data = elf_getdata(s, symtab_data);
> > + if (t)
> > + shndx_data = elf_getdata(t, shndx_data);
> >
> > - sym->idx = symtab->sh.sh_size / sizeof(sym->sym);
> > - elf_dirty_reloc_sym(elf, sym);
> > + if (!symtab_data) {
> > + if (!idx) {
> > + void *buf;
>
> I'm confused by whatever this is doing, how is !symtab_data possible,
> i.e. why would symtab not have data?
>
> > elf_create_section_symbol(struct elf *elf, struct section *sec)
> > {
> > struct section *symtab, *symtab_shndx;
> > - Elf_Data *shndx_data = NULL;
> > - struct symbol *sym;
> > - Elf32_Word shndx;
> > + Elf32_Word first_non_local, new;
> > + struct symbol *sym, *old;
> > + int size;
> > +
> > + if (elf->ehdr.e_ident[EI_CLASS] == ELFCLASS32)
> > + size = sizeof(Elf32_Sym);
> > + else
> > + size = sizeof(Elf64_Sym);
>
> This should probably be called 'entsize' and I think you can just get it
> from symtab->sh.sh_entsize.
>
> > + /*
> > + * Either way, we added a LOCAL symbol.
> > + */
> > + symtab->sh.sh_info += 1;
> > +
> > elf_add_symbol(elf, sym);
>
> Not sure if it matters here, but elf_add_symbol() doesn't set sym->alias
> and sym->pv_target, and both of those are unconditionally initialized in
> read_symbols(). Should elf_add_symbol() be changed to initialize them?
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -374,6 +374,9 @@ static void elf_add_symbol(struct elf *e
struct list_head *entry;
struct rb_node *pnode;
+ INIT_LIST_HEAD(&sym->pv_target);
+ sym->alias = sym;
+
sym->type = GELF_ST_TYPE(sym->sym.st_info);
sym->bind = GELF_ST_BIND(sym->sym.st_info);
@@ -438,8 +441,6 @@ static int read_symbols(struct elf *elf)
return -1;
}
memset(sym, 0, sizeof(*sym));
- INIT_LIST_HEAD(&sym->pv_target);
- sym->alias = sym;
sym->idx = i;
@@ -604,7 +605,8 @@ static void elf_dirty_reloc_sym(struct e
/*
* The libelf API is terrible; gelf_update_sym*() takes a data block relative
- * index value. As such, iterate the data blocks and adjust index until it fits.
+ * index value, *NOT* the symbol index. As such, iterate the data blocks and
+ * adjust index until it fits.
*
* If no data block is found, allow adding a new data block provided the index
* is only one past the end.
@@ -613,14 +615,10 @@ static int elf_update_symbol(struct elf
struct section *symtab_shndx, struct symbol *sym)
{
Elf_Data *symtab_data = NULL, *shndx_data = NULL;
+ Elf64_Xword entsize = symtab->sh.sh_entsize;
Elf32_Word shndx = sym->sec->idx;
Elf_Scn *s, *t = NULL;
- int size, idx = sym->idx;
-
- if (elf->ehdr.e_ident[EI_CLASS] == ELFCLASS32)
- size = sizeof(Elf32_Sym);
- else
- size = sizeof(Elf64_Sym);
+ int max_idx, idx = sym->idx;
s = elf_getscn(elf->elf, symtab->idx);
if (!s) {
@@ -637,11 +635,14 @@ static int elf_update_symbol(struct elf
}
for (;;) {
+ /* get next data descriptor for the relevant sections */
symtab_data = elf_getdata(s, symtab_data);
if (t)
shndx_data = elf_getdata(t, shndx_data);
+ /* end-of-list */
if (!symtab_data) {
+ /* if @idx == 0, it's the next contiguous entry, create it */
if (!idx) {
void *buf;
@@ -649,53 +650,60 @@ static int elf_update_symbol(struct elf
if (t)
shndx_data = elf_newdata(t);
- buf = calloc(1, size);
+ buf = calloc(1, entsize);
if (!buf) {
WARN("malloc");
return -1;
}
symtab_data->d_buf = buf;
- symtab_data->d_size = size;
+ symtab_data->d_size = entsize;
symtab_data->d_align = 1;
symtab_data->d_type = ELF_T_SYM;
- symtab->sh.sh_size += size;
+ symtab->sh.sh_size += entsize;
symtab->changed = true;
if (t) {
shndx_data->d_buf = &sym->sec->idx;
shndx_data->d_size = sizeof(Elf32_Word);
- shndx_data->d_align = 4;
+ shndx_data->d_align = sizeof(Elf32_Word);
shndx_data->d_type = ELF_T_WORD;
- symtab_shndx->sh.sh_size += 4;
+ symtab_shndx->sh.sh_size += sizeof(Elf32_Word);
symtab_shndx->changed = true;
}
break;
}
+ /* we don't do holes in symbol tables */
WARN("index out of range");
return -1;
}
+ /* empty blocks should not happen */
if (!symtab_data->d_size) {
WARN("zero size data");
return -1;
}
- if (idx * size < symtab_data->d_size)
+ /* is this the right block? */
+ max_idx = symtab_data->d_size / entsize;
+ if (idx < max_idx)
break;
- idx -= symtab_data->d_size / size;
+ /* adjust index and try again */
+ idx -= max_idx;
}
+ /* something went side-ways */
if (idx < 0) {
WARN("negative index");
return -1;
}
+ /* setup extended section index magic and write the symbol */
if (shndx >= SHN_UNDEF && shndx < SHN_LORESERVE) {
sym->sym.st_shndx = shndx;
if (!shndx_data)
@@ -720,14 +728,8 @@ static struct symbol *
elf_create_section_symbol(struct elf *elf, struct section *sec)
{
struct section *symtab, *symtab_shndx;
- Elf32_Word first_non_local, new;
+ Elf32_Word first_non_local, new_idx;
struct symbol *sym, *old;
- int size;
-
- if (elf->ehdr.e_ident[EI_CLASS] == ELFCLASS32)
- size = sizeof(Elf32_Sym);
- else
- size = sizeof(Elf64_Sym);
symtab = find_section_by_name(elf, ".symtab");
if (symtab) {
@@ -752,16 +754,15 @@ elf_create_section_symbol(struct elf *el
// st_value 0
// st_size 0
- new = symtab->sh.sh_size / size;
-
/*
* Move the first global symbol, as per sh_info, into a new, higher
* symbol index. This fees up a spot for a new local symbol.
*/
first_non_local = symtab->sh.sh_info;
+ new_idx = symtab->sh.sh_size / symtab->sh.sh_entsize;
old = find_symbol_by_index(elf, first_non_local);
if (old) {
- old->idx = new;
+ old->idx = new_idx;
hlist_del(&old->hash);
elf_hash_add(symbol, &old->hash, old->idx);
@@ -773,10 +774,10 @@ elf_create_section_symbol(struct elf *el
return NULL;
}
- new = first_non_local;
+ new_idx = first_non_local;
}
- sym->idx = new;
+ sym->idx = new_idx;
if (elf_update_symbol(elf, symtab, symtab_shndx, sym)) {
WARN("elf_update_symbol");
return NULL;
next prev parent reply other threads:[~2022-05-18 7:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 20:47 objtool "no non-local symbols" error with tip of tree LLVM Nathan Chancellor
2022-05-16 21:40 ` Peter Zijlstra
2022-05-16 22:48 ` Nathan Chancellor
2022-05-17 15:33 ` Peter Zijlstra
2022-05-17 15:42 ` Peter Zijlstra
2022-05-17 18:53 ` Nathan Chancellor
2022-05-18 1:24 ` Josh Poimboeuf
2022-05-18 5:30 ` Peter Zijlstra
2022-05-18 16:17 ` Josh Poimboeuf
2022-05-18 17:14 ` Josh Poimboeuf
2022-05-18 17:25 ` Peter Zijlstra
2022-05-18 18:04 ` Josh Poimboeuf
2022-05-18 7:40 ` Peter Zijlstra [this message]
2022-05-18 7:41 ` [PATCH] objtool: Fix symbol creation Peter Zijlstra
2022-05-18 17:36 ` Josh Poimboeuf
2022-05-18 22:10 ` Peter Zijlstra
2022-05-19 9:00 ` [PATCH v2] " Peter Zijlstra
2022-05-19 15:13 ` Josh Poimboeuf
2022-09-07 0:47 ` [PATCH] " Sami Tolvanen
2022-05-19 21:57 ` [tip: objtool/urgent] " tip-bot2 for Peter Zijlstra
2022-05-20 10:53 ` [tip: objtool/core] " tip-bot2 for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220518074042.GA10117@worktop.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=jpoimboe@kernel.org \
--cc=kasan-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.