[PATCH v2] net/iavf: fix Rx queue interrupt setting

[Ke Zhang <ke1x.zhang@intel.com>]

For Rx-Queue Interrupt Setting, when vf rx interrupt
disable(INTENA=0), there are two ways to write back
descriptor to host memory:

1)Set WB_ON_ITR bit 0 to Interrupt Dynamic Control Register:
Completed descriptors are posted to host memory according to
the internal descriptor cache policy (in other words when a
full cache line is available for write-back).

2)Set WB_ON_ITR bit 1 to Interrupt Dynamic Control Register:
Completed descriptors also trigger the ITR. Following ITR
expiration, all leftover completed descriptors are posted to
host memory.

Changing 1) to 2) to make sure VF synchronizing with PF.

Fixes: d6bde6b5eae9 ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org

Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
---
 drivers/net/iavf/iavf_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index d6190ac24a..17c7720600 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -1833,7 +1833,7 @@ iavf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
 
 	IAVF_WRITE_REG(hw,
 		      IAVF_VFINT_DYN_CTLN1(msix_intr - IAVF_RX_VEC_START),
-		      0);
+		      IAVF_VFINT_DYN_CTLN1_WB_ON_ITR_MASK);
 
 	IAVF_WRITE_FLUSH(hw);
 	return 0;
-- 
2.25.1