From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org,
Tudor Ambarus <Tudor.Ambarus@microchip.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Frieder Schrempf <frieder.schrempf@kontron.de>,
Michael Walle <michael@walle.cc>, Pratyush Yadav <p.yadav@ti.com>
Subject: Re: [GIT PULL] mtd: nand: Changes for 5.19
Date: Fri, 20 May 2022 14:12:50 +0200 [thread overview]
Message-ID: <20220520141250.49e563ac@xps-13> (raw)
In-Reply-To: <20220518114017.4c864c64@xps-13>
miquel.raynal@bootlin.com wrote on Wed, 18 May 2022 11:40:17 +0200:
> Hello,
>
> This is the NAND PR for v5.19-rc1.
Pulled into mtd/next.
>
> Thanks,
> Miquèl
>
>
> The following changes since commit 3123109284176b1532874591f7c81f3837bbdc17:
>
> Linux 5.18-rc1 (2022-04-03 14:08:21 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git tags/nand/for-5.19
>
> for you to fetch changes up to 6a2277a0ebe71b45e1d5508a2d7aecd28c98e3d3:
>
> mtd: rawnand: renesas: Use runtime PM instead of the raw clock API (2022-05-16 18:36:21 +0200)
>
> ----------------------------------------------------------------
> NAND core:
> * Print offset instead of page number for bad blocks
>
> Raw NAND controller drivers:
> * Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
> * CS553X: simplify the return expression of cs553x_write_ctrl_byte()
> * Davinci: Remove redundant unsigned comparison to zero
> * Denali: Use managed device resources
> * GPMI:
> - Add large oob bch setting support
> - Rename the variable ecc_chunk_size
> - Uninline the gpmi_check_ecc function
> - Add strict ecc strength check
> - Refactor BCH geometry settings function
> * Intel: Fix possible null-ptr-deref in ebu_nand_probe()
> * MPC5121: Check before clk_disable_unprepare() not needed
> * Mtk:
> - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
> - Also parse the default nand-ecc-engine property if available
> - Make mtk_ecc.c a separated module
> * OMAP ELM:
> - Convert the bindings to yaml
> - Describe the bindings for AM64 ELM
> - Add support for its compatible
> * Renesas: Use runtime PM instead of the raw clock API and update the
> bindings accordingly
> * Rockchip: Check before clk_disable_unprepare() not needed
> * TMIO: Check return value after calling platform_get_resource()
>
> Raw NAND chip driver:
> * Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
>
> SPI-NAND chip drivers:
> * Gigadevice:
> - Add support for:
> - GD5FxGM7xExxG
> - GD5F{2,4}GQ5xExxG
> - GD5F1GQ5RExxG
> - GD5FxGQ4xExxG
> - Fix Quad IO for GD5F1GQ5UExxG
> * XTX: Add support for XT26G0xA
>
> ----------------------------------------------------------------
> Andreas Böhler (1):
> mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash
>
> Chuanhong Guo (7):
> mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG
> mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG
> mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG
> mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG
> mtd: spinand: gigadevice: add support for GD5FxGM7xExxG
> mtd: nand: make mtk_ecc.c a separated module
> mtd: nand: mtk-ecc: also parse nand-ecc-engine if available
>
> Felix Matouschek (1):
> mtd: spinand: Add support for XTX XT26G0xA
>
> Geert Uytterhoeven (1):
> mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
>
> Han Xu (5):
> mtd: rawnand: gpmi: Refactor bch geometry settings function
> mtd: rawnand: gpmi: Add strict ecc strength check
> mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function
> mtd: rawnand: gpmi: Rename the variable ecc_chunk_size
> mtd: rawnand: gpmi: Add large oob bch setting support
>
> Minghao Chi (1):
> mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
>
> Miquel Raynal (3):
> Merge tag 'mtd/mtk-spi-nand-for-5.19' into nand/next
> dt-bindings: mtd: renesas: Fix the NAND controller description
> mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
>
> Phil Edworthy (2):
> mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
> mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
>
> Rafał Miłecki (1):
> mtd: rawnand: print offset instead of page number for bad blocks
>
> Rickard x Andersson (1):
> mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
>
> Roger Quadros (3):
> dt-bindings: mtd: ti,elm: Convert to yaml
> dt-bindings: mtd: ti,elm: Add support for AM64 ELM
> mtd: rawnand: omap_elm: Add compatible for AM64 ELM
>
> Wang Weiyang (1):
> mtd: rawnand: davinci: Remove redundant unsigned comparison to zero
>
> Yang Yingliang (3):
> mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()
> mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()
> mtd: rawnand: tmio: check return value after calling platform_get_resource()
>
> Zheyu Ma (1):
> mtd: rawnand: denali: Use managed device resources
>
> Documentation/devicetree/bindings/mtd/elm.txt | 16 ------
> Documentation/devicetree/bindings/mtd/renesas-nandc.yaml | 5 ++
> Documentation/devicetree/bindings/mtd/ti,elm.yaml | 72 +++++++++++++++++++++++++
> drivers/mtd/nand/Kconfig | 8 +++
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} | 8 +--
> drivers/mtd/nand/raw/Kconfig | 1 +
> drivers/mtd/nand/raw/Makefile | 2 +-
> drivers/mtd/nand/raw/cadence-nand-controller.c | 5 +-
> drivers/mtd/nand/raw/cs553x_nand.c | 7 +--
> drivers/mtd/nand/raw/davinci_nand.c | 2 +-
> drivers/mtd/nand/raw/denali_pci.c | 15 ++----
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 296 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 12 +++--
> drivers/mtd/nand/raw/intel-nand-controller.c | 2 +-
> drivers/mtd/nand/raw/mpc5121_nfc.c | 3 +-
> drivers/mtd/nand/raw/mtk_nand.c | 2 +-
> drivers/mtd/nand/raw/nand_base.c | 9 ++--
> drivers/mtd/nand/raw/nand_ids.c | 6 +++
> drivers/mtd/nand/raw/nand_toshiba.c | 6 ++-
> drivers/mtd/nand/raw/omap_elm.c | 1 +
> drivers/mtd/nand/raw/renesas-nand-controller.c | 51 ++++++++----------
> drivers/mtd/nand/raw/rockchip-nand-controller.c | 20 ++++---
> drivers/mtd/nand/raw/tmio_nand.c | 3 ++
> drivers/mtd/nand/spi/Makefile | 2 +-
> drivers/mtd/nand/spi/core.c | 1 +
> drivers/mtd/nand/spi/gigadevice.c | 158 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/mtd/nand/spi/xtx.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
> drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h | 0
> include/linux/mtd/spinand.h | 1 +
> 30 files changed, 708 insertions(+), 136 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mtd/elm.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/ti,elm.yaml
> rename drivers/mtd/nand/{raw/mtk_ecc.c => ecc-mtk.c} (98%)
> create mode 100644 drivers/mtd/nand/spi/xtx.c
> rename drivers/mtd/nand/raw/mtk_ecc.h => include/linux/mtd/nand-ecc-mtk.h (100%)
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
prev parent reply other threads:[~2022-05-20 12:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-18 9:40 [GIT PULL] mtd: nand: Changes for 5.19 Miquel Raynal
2022-05-20 12:12 ` Miquel Raynal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220520141250.49e563ac@xps-13 \
--to=miquel.raynal@bootlin.com \
--cc=Tudor.Ambarus@microchip.com \
--cc=frieder.schrempf@kontron.de \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.