All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: X86 ML <x86@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH 1/3] x86/microcode: Rip out the OLD_INTERFACE
Date: Tue, 24 May 2022 20:53:22 +0200	[thread overview]
Message-ID: <20220524185324.28395-2-bp@alien8.de> (raw)
In-Reply-To: <20220524185324.28395-1-bp@alien8.de>

From: Borislav Petkov <bp@suse.de>

Everything should be using the early initrd loading by now.

Signed-off-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/Kconfig                     |  12 ----
 arch/x86/kernel/cpu/microcode/core.c | 100 ---------------------------
 2 files changed, 112 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2e8f6fd28e59..1c0da2dbfb26 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1345,18 +1345,6 @@ config MICROCODE_AMD
 	  If you select this option, microcode patch loading support for AMD
 	  processors will be enabled.
 
-config MICROCODE_OLD_INTERFACE
-	bool "Ancient loading interface (DEPRECATED)"
-	default n
-	depends on MICROCODE
-	help
-	  DO NOT USE THIS! This is the ancient /dev/cpu/microcode interface
-	  which was used by userspace tools like iucode_tool and microcode.ctl.
-	  It is inadequate because it runs too late to be able to properly
-	  load microcode on a machine and it needs special tools. Instead, you
-	  should've switched to the early loading method with the initrd or
-	  builtin microcode by now: Documentation/x86/microcode.rst
-
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
 	help
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 239ff5fcec6a..b72c4134f289 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -373,98 +373,6 @@ static int apply_microcode_on_target(int cpu)
 	return ret;
 }
 
-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-static int do_microcode_update(const void __user *buf, size_t size)
-{
-	int error = 0;
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-		enum ucode_state ustate;
-
-		if (!uci->valid)
-			continue;
-
-		ustate = microcode_ops->request_microcode_user(cpu, buf, size);
-		if (ustate == UCODE_ERROR) {
-			error = -1;
-			break;
-		} else if (ustate == UCODE_NEW) {
-			apply_microcode_on_target(cpu);
-		}
-	}
-
-	return error;
-}
-
-static int microcode_open(struct inode *inode, struct file *file)
-{
-	return capable(CAP_SYS_RAWIO) ? stream_open(inode, file) : -EPERM;
-}
-
-static ssize_t microcode_write(struct file *file, const char __user *buf,
-			       size_t len, loff_t *ppos)
-{
-	ssize_t ret = -EINVAL;
-	unsigned long nr_pages = totalram_pages();
-
-	if ((len >> PAGE_SHIFT) > nr_pages) {
-		pr_err("too much data (max %ld pages)\n", nr_pages);
-		return ret;
-	}
-
-	cpus_read_lock();
-	mutex_lock(&microcode_mutex);
-
-	if (do_microcode_update(buf, len) == 0)
-		ret = (ssize_t)len;
-
-	if (ret > 0)
-		perf_check_microcode();
-
-	mutex_unlock(&microcode_mutex);
-	cpus_read_unlock();
-
-	return ret;
-}
-
-static const struct file_operations microcode_fops = {
-	.owner			= THIS_MODULE,
-	.write			= microcode_write,
-	.open			= microcode_open,
-	.llseek		= no_llseek,
-};
-
-static struct miscdevice microcode_dev = {
-	.minor			= MICROCODE_MINOR,
-	.name			= "microcode",
-	.nodename		= "cpu/microcode",
-	.fops			= &microcode_fops,
-};
-
-static int __init microcode_dev_init(void)
-{
-	int error;
-
-	error = misc_register(&microcode_dev);
-	if (error) {
-		pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
-		return error;
-	}
-
-	return 0;
-}
-
-static void __exit microcode_dev_exit(void)
-{
-	misc_deregister(&microcode_dev);
-}
-#else
-#define microcode_dev_init()	0
-#define microcode_dev_exit()	do { } while (0)
-#endif
-
 /* fake device for request_firmware */
 static struct platform_device	*microcode_pdev;
 
@@ -856,10 +764,6 @@ static int __init microcode_init(void)
 		goto out_driver;
 	}
 
-	error = microcode_dev_init();
-	if (error)
-		goto out_ucode_group;
-
 	register_syscore_ops(&mc_syscore_ops);
 	cpuhp_setup_state_nocalls(CPUHP_AP_MICROCODE_LOADER, "x86/microcode:starting",
 				  mc_cpu_starting, NULL);
@@ -870,10 +774,6 @@ static int __init microcode_init(void)
 
 	return 0;
 
- out_ucode_group:
-	sysfs_remove_group(&cpu_subsys.dev_root->kobj,
-			   &cpu_root_microcode_group);
-
  out_driver:
 	cpus_read_lock();
 	mutex_lock(&microcode_mutex);
-- 
2.35.1


  reply	other threads:[~2022-05-24 18:53 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-24 18:53 [RFC PATCH 0/3] x86/microcode: Drop old interface and default-disable late loading Borislav Petkov
2022-05-24 18:53 ` Borislav Petkov [this message]
2022-05-24 18:53 ` [RFC PATCH 2/3] x86/microcode: Default-disable " Borislav Petkov
2022-05-27 10:37   ` Ingo Molnar
2022-05-27 10:58     ` Borislav Petkov
2022-05-24 18:53 ` [RFC PATCH 3/3] x86/microcode: Taint and warn on " Borislav Petkov
2022-05-25  1:03   ` Luck, Tony
2022-05-25  6:59     ` Peter Zijlstra
2022-05-25  7:37       ` Borislav Petkov
2022-05-25 14:50         ` Luck, Tony
2022-05-25 15:28           ` Borislav Petkov
2022-05-25 15:40             ` Luck, Tony
2022-05-25 16:00               ` Borislav Petkov
2022-05-26 12:11                 ` Taint addresses Borislav Petkov
2022-05-26 16:41                   ` Luck, Tony
2022-05-27  9:45                     ` Borislav Petkov
2022-05-25 10:03   ` [RFC PATCH 3/3] x86/microcode: Taint and warn on late loading Peter Zijlstra
2022-05-25 12:52     ` [RFC PATCH -v2] " Borislav Petkov
2022-05-25 13:55 ` [PATCH 4/3] x86/microcode: Remove unnecessary perf callback default-disable " Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220524185324.28395-2-bp@alien8.de \
    --to=bp@alien8.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.