From: Sascha Hauer <sha@pengutronix.de>
To: Alexander Shiyan <eagle.alexander923@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD
Date: Thu, 2 Jun 2022 08:55:15 +0200 [thread overview]
Message-ID: <20220602065515.GF1615@pengutronix.de> (raw)
In-Reply-To: <20220601071452.17033-1-eagle.alexander923@gmail.com>
On Wed, Jun 01, 2022 at 10:14:52AM +0300, Alexander Shiyan wrote:
> arm-linux-ld: arch/arm/mach-omap/xload.o: in function read_mtd_barebox':
> /home/ARM/barebox/arch/arm/mach-omap/xload.c:75: undefined reference to mtd_peb_read_file'
>
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> ---
> arch/arm/mach-omap/xload.c | 72 ++++++++++++++++++--------------------
> 1 file changed, 34 insertions(+), 38 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> index 6d3704b8cf..78b2221304 100644
> --- a/arch/arm/mach-omap/xload.c
> +++ b/arch/arm/mach-omap/xload.c
> @@ -53,46 +53,44 @@ static void *read_mtd_barebox(const char *part, unsigned int start, unsigned int
> struct mtd_info *mtd;
> unsigned int ps, pe;
>
> - if (!IS_ENABLED(CONFIG_MTD)) {
> - printf("Cannot load from nand/nor: MTD support is disabled\n");
> - return NULL;
> - }
> + if (IS_ENABLED(CONFIG_MTD)) {
> + cdev = cdev_open_by_name(part, O_RDONLY);
> + if (!cdev) {
> + printf("failed to open partition\n");
> + return NULL;
> + }
>
> - cdev = cdev_open_by_name(part, O_RDONLY);
> - if (!cdev) {
> - printf("failed to open partition\n");
> - return NULL;
> - }
> + mtd = cdev->mtd;
> + if (!mtd)
> + return NULL;
>
> - mtd = cdev->mtd;
> - if (!mtd)
> - return NULL;
> + if (mtd_mod_by_eb(start, mtd) != 0) {
> + printf("Start must be eraseblock aligned\n");
> + return NULL;
> + }
>
> - if (mtd_mod_by_eb(start, mtd) != 0) {
> - printf("Start must be eraseblock aligned\n");
> - return NULL;
> - }
> + to = xmalloc(size);
>
> - to = xmalloc(size);
> + ps = mtd_div_by_eb(start, mtd);
> + pe = mtd_div_by_eb(start + size, mtd);
> + ret = mtd_peb_read_file(mtd, ps, pe, to, size);
> + if (ret) {
> + printf("Can't read image from %s: %d\n", part, ret);
> + goto err;
> + }
>
> - ps = mtd_div_by_eb(start, mtd);
> - pe = mtd_div_by_eb(start + size, mtd);
> - ret = mtd_peb_read_file(mtd, ps, pe, to, size);
> - if (ret) {
> - printf("Can't read image from %s: %d\n", part, ret);
> - goto err;
> - }
> + size = get_image_size(to);
> + if (!size) {
> + printf("failed to get image size\n");
> + goto err;
> + }
>
> - size = get_image_size(to);
> - if (!size) {
> - printf("failed to get image size\n");
> - goto err;
> - }
> + return to;
>
> - return to;
> + err:
> + free(to);
> + }
>
> -err:
> - free(to);
> return NULL;
> }
>
> @@ -292,7 +290,7 @@ static void *am33xx_net_boot(void)
> */
> static __noreturn int omap_xload(void)
> {
> - void *func;
> + void *func = NULL;
>
> if (!barebox_part)
> barebox_part = &default_part;
> @@ -310,10 +308,8 @@ static __noreturn int omap_xload(void)
> } else if (IS_ENABLED(CONFIG_FS_OMAP4_USBBOOT)) {
> printf("booting from USB\n");
> func = omap4_xload_boot_usb();
> - } else {
> + } else
> printf("booting from USB not enabled\n");
> - func = NULL;
> - }
> break;
> case BOOTSOURCE_NAND:
> printf("booting from NAND\n");
> @@ -327,16 +323,16 @@ static __noreturn int omap_xload(void)
> if (IS_ENABLED(CONFIG_OMAP_SERIALBOOT)) {
> printf("booting from serial\n");
> func = omap_serial_boot();
> - break;
> }
> + break;
> case BOOTSOURCE_NET:
> if (IS_ENABLED(CONFIG_AM33XX_NET_BOOT)) {
> printf("booting from NET\n");
> func = am33xx_net_boot();
> - break;
> } else {
> printf("booting from network not enabled\n");
> }
> + break;
> default:
> printf("unknown boot source. Fall back to nand\n");
> func = omap_xload_boot_nand(barebox_part);
> --
> 2.32.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-06-02 6:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-01 7:14 [PATCH] ARM: OMAP: xload: Fix compile without CONFIG_MTD Alexander Shiyan
2022-06-02 6:55 ` Sascha Hauer [this message]
2022-06-02 8:07 ` Ahmad Fatoum
2022-06-02 8:59 ` Alexander Shiyan
2022-06-02 9:01 ` Ahmad Fatoum
2022-06-02 9:10 ` Alexander Shiyan
2022-06-03 6:56 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220602065515.GF1615@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=eagle.alexander923@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.