All of lore.kernel.org
 help / color / mirror / Atom feed
From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Jan Kiszka <jan.kiszka@siemens.com>,
	Matthew Rosato <mjrosato@linux.ibm.com>,
	Pierre Morel <pmorel@linux.ibm.com>
Cc: linux-s390@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH RESEND v5 2/4] PCI: Move jailhouse's isolated function handling to pci_scan_slot()
Date: Thu,  2 Jun 2022 12:30:14 +0200	[thread overview]
Message-ID: <20220602103016.1499031-3-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20220602103016.1499031-1-schnelle@linux.ibm.com>

The special case of the jailhouse hypervisor passing through individual
PCI functions handles scanning for PCI functions even if function 0 does
not exist. Currently this is done with an extra loop duplicating the one
in pci_scan_slot(). By incorporating the check for jailhouse_paravirt()
into pci_scan_slot() we can instead do this as part of the normal
slot scan. Note that with the assignment of dev->multifunction gated by
fn > 0 we set dev->multifunction unconditionally for all functions if
function 0 is missing just as in the existing jailhouse loop.

The only functional change is that we now call
pcie_aspm_init_link_state() for these functions but this already
happened if function 0 was passed through and should not be a problem.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/pci/probe.c | 30 ++++++++++--------------------
 1 file changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 78aa1bccab2f..3029edc68ff7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2658,8 +2658,13 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
 			if (fn > 0)
 				dev->multifunction = 1;
 		} else if (fn == 0) {
-			/* function 0 is required */
-			break;
+			/*
+			 * function 0 is required unless we are running on
+			 * a hypervisor which passes through individual PCI
+			 * functions.
+			 */
+			if (!jailhouse_paravirt())
+				break;
 		}
 		fn = next_fn(bus, dev, fn);
 	} while (fn >= 0);
@@ -2858,29 +2863,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 {
 	unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
 	unsigned int start = bus->busn_res.start;
-	unsigned int devfn, fn, cmax, max = start;
+	unsigned int devfn, cmax, max = start;
 	struct pci_dev *dev;
-	int nr_devs;
 
 	dev_dbg(&bus->dev, "scanning bus\n");
 
 	/* Go find them, Rover! */
-	for (devfn = 0; devfn < 256; devfn += 8) {
-		nr_devs = pci_scan_slot(bus, devfn);
-
-		/*
-		 * The Jailhouse hypervisor may pass individual functions of a
-		 * multi-function device to a guest without passing function 0.
-		 * Look for them as well.
-		 */
-		if (jailhouse_paravirt() && nr_devs == 0) {
-			for (fn = 1; fn < 8; fn++) {
-				dev = pci_scan_single_device(bus, devfn + fn);
-				if (dev)
-					dev->multifunction = 1;
-			}
-		}
-	}
+	for (devfn = 0; devfn < 256; devfn += 8)
+		pci_scan_slot(bus, devfn);
 
 	/* Reserve buses for SR-IOV capability */
 	used_buses = pci_iov_bus_range(bus);
-- 
2.32.0


  parent reply	other threads:[~2022-06-02 10:30 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-02 10:30 [PATCH RESEND v5 0/4] PCI: Rework pci_scan_slot() and isolated PCI functions Niklas Schnelle
2022-06-02 10:30 ` [PATCH RESEND v5 1/4] PCI: Clean up pci_scan_slot() Niklas Schnelle
2022-06-15 11:09   ` Niklas Schnelle
2022-06-02 10:30 ` Niklas Schnelle [this message]
2022-06-02 10:30 ` [PATCH RESEND v5 3/4] PCI: Extend isolated function probing to s390 Niklas Schnelle
2022-06-02 10:30 ` [PATCH RESEND v5 4/4] s390/pci: allow zPCI zbus without a function zero Niklas Schnelle
  -- strict thread matches above, loose matches on Subject: below --
2022-05-05  8:38 [PATCH RESEND v5 0/4] PCI: Rework pci_scan_slot() and isolated PCI functions Niklas Schnelle
2022-05-05  8:38 ` [PATCH RESEND v5 2/4] PCI: Move jailhouse's isolated function handling to pci_scan_slot() Niklas Schnelle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220602103016.1499031-3-schnelle@linux.ibm.com \
    --to=schnelle@linux.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=jan.kiszka@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=mjrosato@linux.ibm.com \
    --cc=pmorel@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.