From: Alexander Shiyan <eagle.alexander923@gmail.com>
To: barebox@lists.infradead.org
Cc: Alexander Shiyan <eagle.alexander923@gmail.com>
Subject: [RFC 2/2] clocksource: arm_global_timer: Convert driver to use clocksource context field
Date: Fri, 10 Jun 2022 11:56:32 +0300 [thread overview]
Message-ID: <20220610085633.21606-2-eagle.alexander923@gmail.com> (raw)
In-Reply-To: <20220610085633.21606-1-eagle.alexander923@gmail.com>
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
drivers/clocksource/arm_global_timer.c | 27 +++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
index 6e2fae9ba4..3e9b90059a 100644
--- a/drivers/clocksource/arm_global_timer.c
+++ b/drivers/clocksource/arm_global_timer.c
@@ -27,8 +27,6 @@
#define GT_CONTROL 0x08
#define GT_CONTROL_TIMER_ENABLE BIT(0) /* this bit is NOT banked */
-static void __iomem *gt_base;
-
/*
* To get the value from the Global Timer Counter register proceed as follows:
* 1. Read the upper 32-bit timer counter register
@@ -39,6 +37,7 @@ static void __iomem *gt_base;
*/
static uint64_t arm_global_clocksource_read(void *ctx)
{
+ void __iomem *gt_base = ctx;
uint64_t counter;
uint32_t lower;
uint32_t upper, old_upper;
@@ -56,11 +55,25 @@ static uint64_t arm_global_clocksource_read(void *ctx)
return counter;
}
+static int arm_global_timer_init(struct clocksource *cs)
+{
+ void __iomem *gt_base = cs->ctx;
+
+ writel(0, gt_base + GT_CONTROL);
+ writel(0, gt_base + GT_COUNTER0);
+ writel(0, gt_base + GT_COUNTER1);
+ /* enables timer on all the cores */
+ writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
+
+ return 0;
+}
+
static struct clocksource cs = {
.read = arm_global_clocksource_read,
.mask = CLOCKSOURCE_MASK(64),
.shift = 0,
.priority = 70,
+ .init = arm_global_timer_init,
};
static int arm_global_timer_probe(struct device_d *dev)
@@ -86,17 +99,9 @@ static int arm_global_timer_probe(struct device_d *dev)
return ret;
}
- gt_base = IOMEM(iores->start);
-
cs.mult = clocksource_hz2mult(clk_get_rate(clk), cs.shift);
- writel(0, gt_base + GT_CONTROL);
- writel(0, gt_base + GT_COUNTER0);
- writel(0, gt_base + GT_COUNTER1);
- /* enables timer on all the cores */
- writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
-
- return init_clock(&cs, NULL);
+ return init_clock(&cs, IOMEM(iores->start));
}
static struct of_device_id arm_global_timer_dt_ids[] = {
--
2.32.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-06-10 8:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 8:56 [RFC 1/2] clocksource: Introduce a context storage for the clocksource structure Alexander Shiyan
2022-06-10 8:56 ` Alexander Shiyan [this message]
2022-06-10 9:40 ` [RFC 2/2] clocksource: arm_global_timer: Convert driver to use clocksource context field Sascha Hauer
2022-06-10 9:53 ` Alexander Shiyan
2022-06-10 8:56 ` [RFC 0/2] Context storage for the clocksource Alexander Shiyan
2022-06-10 9:35 ` [RFC 1/2] clocksource: Introduce a context storage for the clocksource structure Sascha Hauer
2022-06-10 9:42 ` Alexander Shiyan
2022-06-10 9:44 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220610085633.21606-2-eagle.alexander923@gmail.com \
--to=eagle.alexander923@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.