All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Delevoryas <me@pjd.dev>
Cc: clg@kaod.org, peter.maydell@linaro.org, andrew@aj.id.au,
	joel@jms.id.au, cminyard@mvista.com, titusr@google.com,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org, zhdaniel@fb.com,
	pdel@fb.com
Subject: [PATCH v3 08/14] hw/i2c/pmbus: Add idle state to return 0xff's
Date: Wed, 29 Jun 2022 21:51:27 -0700	[thread overview]
Message-ID: <20220630045133.32251-9-me@pjd.dev> (raw)
In-Reply-To: <20220630045133.32251-1-me@pjd.dev>

From: Peter Delevoryas <pdel@fb.com>

Signed-off-by: Peter Delevoryas <pdel@fb.com>
---
 hw/i2c/pmbus_device.c         | 9 +++++++++
 include/hw/i2c/pmbus_device.h | 7 +++++++
 2 files changed, 16 insertions(+)

diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index 62885fa6a1..f89fea65f3 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -261,6 +261,11 @@ void pmbus_check_limits(PMBusDevice *pmdev)
     }
 }
 
+void pmbus_idle(PMBusDevice *pmdev)
+{
+    pmdev->code = PMBUS_IDLE_STATE;
+}
+
 /* assert the status_cml error upon receipt of malformed command */
 static void pmbus_cml_error(PMBusDevice *pmdev)
 {
@@ -984,6 +989,10 @@ static uint8_t pmbus_receive_byte(SMBusDevice *smd)
         }
         break;
 
+    case PMBUS_IDLE_STATE:
+        pmbus_send8(pmdev, PMBUS_ERR_BYTE);
+        break;
+
     case PMBUS_CLEAR_FAULTS:              /* Send Byte */
     case PMBUS_PAGE_PLUS_WRITE:           /* Block Write-only */
     case PMBUS_STORE_DEFAULT_ALL:         /* Send Byte */
diff --git a/include/hw/i2c/pmbus_device.h b/include/hw/i2c/pmbus_device.h
index 0f4d6b3fad..93f5d57c9d 100644
--- a/include/hw/i2c/pmbus_device.h
+++ b/include/hw/i2c/pmbus_device.h
@@ -155,6 +155,7 @@ enum pmbus_registers {
     PMBUS_MFR_MAX_TEMP_1            = 0xC0, /* R/W word */
     PMBUS_MFR_MAX_TEMP_2            = 0xC1, /* R/W word */
     PMBUS_MFR_MAX_TEMP_3            = 0xC2, /* R/W word */
+    PMBUS_IDLE_STATE                = 0xFF,
 };
 
 /* STATUS_WORD */
@@ -527,6 +528,12 @@ int pmbus_page_config(PMBusDevice *pmdev, uint8_t page_index, uint64_t flags);
  */
 void pmbus_check_limits(PMBusDevice *pmdev);
 
+/**
+ * Enter an idle state where only the PMBUS_ERR_BYTE will be returned
+ * indefinitely until a new command is issued.
+ */
+void pmbus_idle(PMBusDevice *pmdev);
+
 extern const VMStateDescription vmstate_pmbus_device;
 
 #define VMSTATE_PMBUS_DEVICE(_field, _state) {                       \
-- 
2.37.0


  parent reply	other threads:[~2022-06-30  4:59 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-30  4:51 [PATCH v3 00/14] hw/i2c/aspeed: I2C slave mode DMA RX w/ new regs Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 01/14] hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL reference Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 02/14] hw/i2c/aspeed: Fix DMA len write-enable bit handling Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 03/14] hw/i2c/aspeed: Fix MASTER_EN missing error message Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 04/14] hw/i2c: support multiple masters Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 05/14] hw/i2c: add asynchronous send Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 06/14] hw/i2c/aspeed: add slave device in old register mode Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 07/14] hw/i2c/aspeed: Add new-registers DMA slave mode RX support Peter Delevoryas
2022-06-30  4:51 ` Peter Delevoryas [this message]
2022-06-30 19:18   ` [PATCH v3 08/14] hw/i2c/pmbus: Add idle state to return 0xff's Titus Rwantare
2022-06-30  4:51 ` [PATCH v3 09/14] hw/sensor: Add IC_DEVICE_ID to ISL voltage regulators Peter Delevoryas
2022-06-30 19:20   ` Titus Rwantare
2022-06-30  4:51 ` [PATCH v3 10/14] hw/sensor: Add Renesas ISL69259 device model Peter Delevoryas
2022-06-30  6:30   ` Cédric Le Goater
2022-06-30 19:16     ` Titus Rwantare
2022-07-01  5:35       ` Cédric Le Goater
2022-06-30 19:16   ` Titus Rwantare
2022-06-30 21:14     ` Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 11/14] hw/misc/aspeed: Add PECI controller Peter Delevoryas
2022-06-30  6:32   ` Cédric Le Goater
2022-06-30  4:51 ` [PATCH v3 12/14] hw/misc/aspeed: Add fby35-sb-cpld Peter Delevoryas
2022-06-30  6:47   ` Cédric Le Goater
2022-06-30  4:51 ` [PATCH v3 13/14] hw/misc/aspeed: Add intel-me Peter Delevoryas
2022-06-30 11:09   ` Cédric Le Goater
2022-06-30 16:20     ` Peter Delevoryas
2022-06-30  4:51 ` [PATCH v3 14/14] hw/arm/aspeed: Add oby35-cl machine Peter Delevoryas
2022-06-30 11:02   ` Cédric Le Goater
2022-06-30 16:15     ` Peter Delevoryas
2022-06-30 16:42       ` Cédric Le Goater
2022-06-30 17:48         ` Peter Delevoryas
2022-06-30 23:06         ` Peter Delevoryas
2022-07-01  5:39           ` Cédric Le Goater
2022-06-30  6:13 ` [PATCH v3 00/14] hw/i2c/aspeed: I2C slave mode DMA RX w/ new regs Cédric Le Goater
2022-06-30  7:50 ` Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220630045133.32251-9-me@pjd.dev \
    --to=me@pjd.dev \
    --cc=andrew@aj.id.au \
    --cc=clg@kaod.org \
    --cc=cminyard@mvista.com \
    --cc=joel@jms.id.au \
    --cc=pdel@fb.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=titusr@google.com \
    --cc=zhdaniel@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.