From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ard Biesheuvel <ardb@kernel.org>,
broonie@kernel.org, danielmentz@google.com, saravanak@google.com,
kernel-team@android.com
Subject: [PATCH v2 2/9] arm64: Save state of HCR_EL2.E2H before switch to EL1
Date: Thu, 30 Jun 2022 17:04:53 +0100 [thread overview]
Message-ID: <20220630160500.1536744-3-maz@kernel.org> (raw)
In-Reply-To: <20220630160500.1536744-1-maz@kernel.org>
As we're about to switch the way E2H-stuck CPUs boot, save
the boot CPU E2H state as a flag tied to the boot mode
that can then be checked by the idreg override code.
This allows us to replace the is_kernel_in_hyp_mode() check
with a simple comparison with this state, even when running
at EL1. Note that this flag isn't saved in __boot_cpu_mode,
and is only kept in a register in the assembly code.
Use with caution.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/include/asm/virt.h | 7 +++++++
arch/arm64/kernel/head.S | 7 +++++--
arch/arm64/kernel/idreg-override.c | 11 ++++++++---
3 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index dec6eee0eda5..4eb601e7de50 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -49,6 +49,13 @@
#define BOOT_CPU_MODE_EL1 (0xe11)
#define BOOT_CPU_MODE_EL2 (0xe12)
+/*
+ * Flags returned together with the boot mode, but not preserved in
+ * __boot_cpu_mode. Used by the idreg override code to work out the
+ * boot state.
+ */
+#define BOOT_CPU_FLAG_E2H BIT_ULL(32)
+
#ifndef __ASSEMBLY__
#include <asm/ptrace.h>
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 04ebfe663eae..053cd6803147 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -447,6 +447,7 @@ SYM_FUNC_START_LOCAL(__primary_switched)
bl kasan_early_init
#endif
mov x0, x22 // pass FDT address in x0
+ mov x1, x20 // pass the full boot status
bl init_feature_override // Parse cpu feature overrides
mov x0, x20
bl finalise_el2 // Prefer VHE if possible
@@ -469,8 +470,9 @@ SYM_FUNC_END(__primary_switched)
* Since we cannot always rely on ERET synchronizing writes to sysregs (e.g. if
* SCTLR_ELx.EOS is clear), we place an ISB prior to ERET.
*
- * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in w0 if
- * booted in EL1 or EL2 respectively.
+ * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if
+ * booted in EL1 or EL2 respectively, with the top 32 bits containing
+ * potential context flags. These flags are *not* stored in __boot_cpu_mode.
*/
SYM_FUNC_START(init_kernel_el)
mrs x0, CurrentEL
@@ -535,6 +537,7 @@ __cpu_stick_to_vhe:
mov x0, #HVC_FINALISE_EL2
hvc #0
mov x0, #BOOT_CPU_MODE_EL2
+ orr x0, x0, #BOOT_CPU_FLAG_E2H
ret
SYM_FUNC_END(init_kernel_el)
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index f92836e196e5..03185bc46d69 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -19,6 +19,8 @@
#define FTR_ALIAS_NAME_LEN 30
#define FTR_ALIAS_OPTION_LEN 116
+static u64 __boot_status __initdata;
+
struct ftr_set_desc {
char name[FTR_DESC_NAME_LEN];
struct arm64_ftr_override *override;
@@ -37,7 +39,8 @@ static bool __init mmfr1_vh_filter(u64 val)
* the user was trying to force nVHE on us, proceed with
* attitude adjustment.
*/
- return !(is_kernel_in_hyp_mode() && val == 0);
+ return !(__boot_status == (BOOT_CPU_FLAG_E2H | BOOT_CPU_MODE_EL2) &&
+ val == 0);
}
static const struct ftr_set_desc mmfr1 __initconst = {
@@ -229,9 +232,9 @@ static __init void parse_cmdline(const void *fdt)
}
/* Keep checkers quiet */
-void init_feature_override(const void *fdt);
+void init_feature_override(const void *fdt, u64 boot_status);
-asmlinkage void __init init_feature_override(const void *fdt)
+asmlinkage void __init init_feature_override(const void *fdt, u64 boot_status)
{
int i;
@@ -242,6 +245,8 @@ asmlinkage void __init init_feature_override(const void *fdt)
}
}
+ __boot_status = boot_status;
+
parse_cmdline(fdt);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-30 16:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 16:04 [PATCH v2 0/9] arm64: Disabling SVE/SME from the command-line Marc Zyngier
2022-06-30 16:04 ` [PATCH v2 1/9] arm64: Rename the VHE switch to "finalise_el2" Marc Zyngier
2022-06-30 16:04 ` Marc Zyngier [this message]
2022-06-30 16:04 ` [PATCH v2 3/9] arm64: Allow sticky E2H when entering EL1 Marc Zyngier
2022-06-30 16:04 ` [PATCH v2 4/9] arm64: Factor out checking of a feature against the override into a macro Marc Zyngier
2022-06-30 16:04 ` [PATCH v2 5/9] arm64: Allow the idreg override to deal with variable field width Marc Zyngier
2022-07-01 14:00 ` Mark Brown
2022-06-30 16:04 ` [PATCH v2 6/9] arm64: Expose a __check_override primitive for oddball features Marc Zyngier
2022-07-01 14:03 ` Mark Brown
2022-06-30 16:04 ` [PATCH v2 7/9] arm64: Add the arm64.nosme command line option Marc Zyngier
2022-07-01 13:44 ` Mark Brown
2022-06-30 16:04 ` [PATCH v2 8/9] arm64: Add the arm64.nosve " Marc Zyngier
2022-07-01 13:45 ` Mark Brown
2022-06-30 16:05 ` [PATCH v2 9/9] arm64: Add an override for ID_AA64SMFR0_EL1.FA64 Marc Zyngier
2022-07-01 13:52 ` Mark Brown
2022-07-01 15:41 ` [PATCH v2 0/9] arm64: Disabling SVE/SME from the command-line Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220630160500.1536744-3-maz@kernel.org \
--to=maz@kernel.org \
--cc=ardb@kernel.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=danielmentz@google.com \
--cc=kernel-team@android.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=saravanak@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.