Re: [PATCH v3 3/3] ARM: dts: lan966x: Add UDPHS support

From: Herve Codina <herve.codina@bootlin.com>
To: <Claudiu.Beznea@microchip.com>
Cc: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>,
	<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>,
	<Horatiu.Vultur@microchip.com>, <linux-usb@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v3 3/3] ARM: dts: lan966x: Add UDPHS support
Date: Fri, 1 Jul 2022 09:09:09 +0200	[thread overview]
Message-ID: <20220701090909.50654cb4@bootlin.com> (raw)
In-Reply-To: <f4f14941-6839-5691-b2d1-adb049118a4d@microchip.com>

Hi Claudiu,

On Thu, 30 Jun 2022 09:31:00 +0000
<Claudiu.Beznea@microchip.com> wrote:

> On 25.05.2022 10:10, Herve Codina wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > Add UDPHS (the USB High Speed Device Port controller) support.
> > 
> > The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
> > IP. This IP is also the same as the one present in the SAMA5D3
> > SOC.
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > ---
> >  arch/arm/boot/dts/lan966x.dtsi | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
> > index 7d2869648050..e086df741f99 100644
> > --- a/arch/arm/boot/dts/lan966x.dtsi
> > +++ b/arch/arm/boot/dts/lan966x.dtsi
> > @@ -196,6 +196,17 @@ watchdog: watchdog@e0090000 {
> >                         status = "disabled";
> >                 };
> > 
> > +               udc: usb@e0808000 {
> > +                       compatible = "microchip,lan9662-udc",
> > +                                    "atmel,sama5d3-udc";
> > +                       reg = <0x00200000 0x80000>,
> > +                             <0xe0808000 0x400>;
> > +                       interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> > +                       clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
> > +                       clock-names = "pclk", "hclk";
> > +                       status = "disabled";
> > +               };
> > +  
> 
> This doesn't apply clean on top of v5.19-rc1. Can you check and resend?

Sure,
I am going to send a rebased version of this series.

Thanks,
Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com