Re: [PATCH] MIPS: smp-mt: enable all hardware interrupts on second VPE

[Thomas Bogendoerfer <tsbogend@alpha.franken.de>]

On Wed, Jul 06, 2022 at 08:05:30AM +0100, Marc Zyngier wrote:
> On Sun, 03 Jul 2022 19:15:11 +0100,
> Sander Vanheule <sander@svanheule.net> wrote:
> > 
> > Hi Aleksander,
> > 
> > Since this is IRQ related: +CC Marc Zyngier
> > 
> > On Sat, 2022-07-02 at 21:07 +0200, Aleksander Jan Bajkowski wrote:
> > > This patch is needed to handle interrupts by the second VPE on
> > > the Lantiq xRX200, xRX300 and xRX330 SoCs. In these chips, 32 ICU
> > > interrupts are connected to each hardware line. The SoC supports
> > > a total of 160 interrupts. Currently changing smp_affinity to the
> > > second VPE hangs interrupts.
> > > 
> > > This problem affects multithreaded SoCs with a custom interrupt
> > > controller. Chips with 1004Kc core and newer use the MIPS GIC.
> > > 
> > > Also CC'ed Birger Koblitz and Sander Vanheule. Both are working
> > > on support for Realtek RTL930x chips with 34Kc core and Birger
> > > has added a patch in OpenWRT that also enables all interrupt
> > > lines. So it looks like this patch is useful for more SoCs.
> > > 
> > > Tested on lantiq xRX200 and xRX330.
> > > 
> > > Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
> > 
> > Thanks for bringing up this issue. Like you say OpenWrt carries a
> > similar patch, and I also carry a patch on my tree to enable all CPU
> > IRQ lines.
> > 
> > Indiscriminately enabling all IRQ lines doesn't sit quite right with
> > me though, since I would expect these to be enabled
> > on-demand. I.e. when a peripheral requests an IRQ, or when an IRQ
> > controller is cascaded into one of the CPU's interrupt lines. If I
> > understand correctly, the IRQ mask/unmask functions in
> > drivers/irqchip/irq-mips-cpu.c should do this.
> 
> But this is only enabling interrupts at the CPU level, right? And the
> irqchip is still in control of the masking of the individual
> interrupts?

in the Lantiq case yes

> If both assertions are true, then this patch seems OK. If it just let
> any interrupt through without any control, then this is wrong.
> 
> So which one is it?

if there isn't an additional irqchip connected to the cpu interrupt lines,
this patch will cause problems.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]