[PATCH v2 5/8] ARM: dts: qcom: disable usb phy by default for ipq8064

[Christian Marangi <ansuelsmth@gmail.com>]

Disable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake.
Correctly disable all usb phy and enable them only if a device actually
use them.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index a80090f5509e..e70167870476 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1188,6 +1188,8 @@ hs_phy_1: phy@110f8800 {
 			clocks = <&gcc USB30_1_UTMI_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ss_phy_1: phy@110f8830 {
@@ -1196,6 +1198,8 @@ ss_phy_1: phy@110f8830 {
 			clocks = <&gcc USB30_1_MASTER_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		usb3_1: usb3@110f8800 {
-- 
2.36.1