From: Rob Herring <robh@kernel.org>
To: "Nuno Sá" <nuno.sa@analog.com>
Cc: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-input@vger.kernel.org,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Michael Hennerich <michael.hennerich@analog.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [PATCH 05/10] dt-bindings: input: adp5588-keys: add bindings
Date: Mon, 11 Jul 2022 17:03:05 -0600 [thread overview]
Message-ID: <20220711230305.GA424857-robh@kernel.org> (raw)
In-Reply-To: <20220708093448.42617-6-nuno.sa@analog.com>
On Fri, Jul 08, 2022 at 11:34:43AM +0200, Nuno Sá wrote:
> Add device tree bindings for the adp5588-keys driver.
>
> Signed-off-by: Nuno Sá <nuno.sa@analog.com>
> ---
> .../bindings/input/adi,adp5588-keys.yaml | 110 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/adi,adp5588-keys.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/adi,adp5588-keys.yaml b/Documentation/devicetree/bindings/input/adi,adp5588-keys.yaml
> new file mode 100644
> index 000000000000..c079af8a063d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/adi,adp5588-keys.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/adi,adp5588-keys.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADP5588 Keypad Controller
> +
> +maintainers:
> + - Nuno Sá <nuno.sa@analog.com>
> +
> +description: |
> + Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
> +
> +allOf:
> + - $ref: "/schemas/input/matrix-keymap.yaml#"
> + - $ref: input.yaml#
Be consistent with paths and quotes. Don't need quotes. Use either full
path or no path.
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adp5588-keys
> + - adi,adp5587-keys
'-keys' is redundant. The device doesn't do anything else. IOW, it's not
sub-block of an SoC.
> +
> + reg:
> + maxItems: 1
> +
> + vcc-supply:
> + description: Supply Voltage Input
> +
> + reset-gpios:
> + description:
> + If specified, it will be asserted during driver probe. As the line is
> + active low, it should be marked GPIO_ACTIVE_LOW.
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + gpio-controller:
> + description:
> + This property applies if either keypad,num-rows lower than 8 or
> + keypad,num-columns lower than 10.
> +
> + '#gpio-cells':
> + const: 2
> +
> + interrupt-controller:
> + description:
> + This property applies if either keypad,num-rows lower than 8 or
> + keypad,num-columns lower than 10.
> +
> + '#interrupt-cells':
> + const: 2
> +
> + adi,unlock-keys:
> + description:
> + Specifies a maximum of 2 keys that can be used to unlock the keypad.
> + If this property is set, the keyboard will be locked and only unlocked
> + after these keys are pressed. If only one key is set, a double click is
> + needed to unlock the keypad.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 2
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - keypad,num-rows
> + - keypad,num-columns
> + - linux,keymap
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/input/input.h>
> + #include <dt-bindings/gpio/gpio.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adp5588@34 {
> + compatible = "adi,adp5588-keys";
> + reg = <0x34>;
> +
> + vcc-supply = <&vcc>;
> + interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> +
> + keypad,num-rows = <1>;
> + keypad,num-columns = <9>;
> + linux,keymap = <
> + MATRIX_KEY(0x00, 0x00, KEY_1)
> + MATRIX_KEY(0x00, 0x01, KEY_2)
> + MATRIX_KEY(0x00, 0x02, KEY_3)
> + MATRIX_KEY(0x00, 0x03, KEY_4)
> + MATRIX_KEY(0x00, 0x04, KEY_5)
> + MATRIX_KEY(0x00, 0x05, KEY_6)
> + MATRIX_KEY(0x00, 0x06, KEY_7)
> + MATRIX_KEY(0x00, 0x07, KEY_8)
> + MATRIX_KEY(0x00, 0x08, KEY_9)
> + >;
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41037cfd75fe..f9c09f0ed0d4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -548,6 +548,7 @@ M: Michael Hennerich <michael.hennerich@analog.com>
> S: Supported
> W: http://wiki.analog.com/ADP5588
> W: https://ez.analog.com/linux-software-drivers
> +F: Documentation/devicetree/bindings/input/adi,adp5588-keys.yaml
> F: drivers/input/keyboard/adp5588-keys.c
>
> ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
> --
> 2.37.0
>
>
next prev parent reply other threads:[~2022-07-11 23:03 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-08 9:34 [PATCH 00/10] adp5588-keys refactor and fw properties support Nuno Sá
2022-07-08 9:34 ` [PATCH 01/10] input: keyboard: adp5588-keys: support gpi key events as 'gpio keys' Nuno Sá
2022-07-08 14:18 ` Andy Shevchenko
2022-07-08 14:55 ` Sa, Nuno
2022-07-08 15:04 ` Andy Shevchenko
2022-07-08 15:24 ` Sa, Nuno
2022-07-11 14:16 ` Nuno Sá
2022-07-09 4:10 ` kernel test robot
2022-07-09 11:52 ` Andy Shevchenko
2022-07-09 11:52 ` Andy Shevchenko
2022-07-12 5:29 ` kernel test robot
2022-07-08 9:34 ` [PATCH 02/10] gpio: gpio-adp5588: drop the driver Nuno Sá
2022-07-08 13:28 ` Bartosz Golaszewski
2022-07-08 9:34 ` [PATCH 03/10] input: keyboard: adp5588-keys: bail out on returned error Nuno Sá
2022-07-08 14:25 ` Andy Shevchenko
2022-07-08 14:35 ` Sa, Nuno
2022-07-08 14:57 ` Andy Shevchenko
2022-07-08 9:34 ` [PATCH 04/10] input: keyboard: adp5588-keys: add support for fw properties Nuno Sá
2022-07-08 14:56 ` Andy Shevchenko
2022-07-08 15:04 ` Sa, Nuno
2022-07-08 15:07 ` Andy Shevchenko
2022-07-12 14:31 ` Nuno Sá
2022-07-09 1:14 ` kernel test robot
2022-07-08 9:34 ` [PATCH 05/10] dt-bindings: input: adp5588-keys: add bindings Nuno Sá
2022-07-11 23:03 ` Rob Herring [this message]
2022-07-08 9:34 ` [PATCH 06/10] input: keyboard: adp5588-keys: do not check for irq presence Nuno Sá
2022-07-08 9:34 ` [PATCH 07/10] input: keyboard: adp5588-keys: fix coding style warnings Nuno Sá
2022-07-08 14:49 ` Andy Shevchenko
2022-07-08 15:05 ` Sa, Nuno
2022-07-08 15:10 ` Andy Shevchenko
2022-07-08 9:34 ` [PATCH 08/10] input: keyboard: adp5588-keys: add optional reset gpio Nuno Sá
2022-07-11 12:52 ` Linus Walleij
2022-07-08 9:34 ` [PATCH 09/10] input: keyboard: adp5588-keys: add regulator support Nuno Sá
2022-07-08 14:47 ` Andy Shevchenko
2022-07-08 15:00 ` Sa, Nuno
2022-07-08 9:34 ` [PATCH 10/10] input: keyboard: adp5588-keys: Use new PM macros Nuno Sá
2022-07-08 13:59 ` [PATCH 00/10] adp5588-keys refactor and fw properties support Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220711230305.GA424857-robh@kernel.org \
--to=robh@kernel.org \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=michael.hennerich@analog.com \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.