From: Frieder Schrempf <frieder@fris.de>
To: u-boot@lists.denx.de
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>,
Fabio Estevam <festevam@gmail.com>,
Stefano Babic <sbabic@denx.de>
Subject: [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support
Date: Wed, 13 Jul 2022 11:52:11 +0200 [thread overview]
Message-ID: <20220713095229.43274-1-frieder@fris.de> (raw)
From: Frieder Schrempf <frieder.schrempf@kontron.de>
This set contains several improvements for the kontron-sl-mx8mm board
configuration (patches 1 to 13) and support for a new SoM (patch 14,
including baseboard) that complies to the Open Standard Module (OSM) 1.0
hardware specification, size S (https://sget.org/standards/osm).
Frieder Schrempf (14):
imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees
imx: kontron-sl-mx8mm: Add redundant environment
imx: kontron-sl-mx8mm: Enable environment in MMC
imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT
imx: kontron-sl-mx8mm: Enable bootaux command
imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper
alignment
imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint
imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters
imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types
imx: kontron-sl-mx8mm: Adjust board and SoM model strings
imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO
voltage
imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC
regulator-names
imx: kontron-sl-mx8mm: Simplify code in spl.c
imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL
i.MX8MM OSM-S
arch/arm/dts/Makefile | 1 -
.../imx8mm-kontron-n801x-s-lvds-u-boot.dtsi | 6 -
arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts | 116 -
.../dts/imx8mm-kontron-n801x-s-u-boot.dtsi | 7 +-
arch/arm/dts/imx8mm-kontron-n801x-s.dts | 5 +-
arch/arm/dts/imx8mm-kontron-n801x-som.dtsi | 30 +-
.../dts/imx8mm-kontron-n802x-s-u-boot.dtsi | 6 +
arch/arm/dts/imx8mm-kontron-n802x-s.dts | 376 ++++
arch/arm/dts/imx8mm-kontron-n802x-som.dtsi | 309 +++
...tsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} | 8 +-
board/kontron/sl-mx8mm/MAINTAINERS | 1 +
board/kontron/sl-mx8mm/lpddr4_timing.c | 1969 ++++++++---------
board/kontron/sl-mx8mm/sl-mx8mm.c | 41 +
board/kontron/sl-mx8mm/sl-mx8mm.env | 7 +
board/kontron/sl-mx8mm/spl.c | 85 +-
configs/kontron-sl-mx8mm_defconfig | 10 +-
doc/board/kontron/sl-mx8mm.rst | 7 +-
include/configs/kontron-sl-mx8mm.h | 16 +-
18 files changed, 1717 insertions(+), 1283 deletions(-)
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds-u-boot.dtsi
delete mode 100644 arch/arm/dts/imx8mm-kontron-n801x-s-lvds.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-s.dts
create mode 100644 arch/arm/dts/imx8mm-kontron-n802x-som.dtsi
rename arch/arm/dts/{imx8mm-kontron-n801x-u-boot.dtsi => imx8mm-kontron-n80xx-s-u-boot.dtsi} (88%)
create mode 100644 board/kontron/sl-mx8mm/sl-mx8mm.env
--
2.37.0
next reply other threads:[~2022-07-13 9:52 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 9:52 Frieder Schrempf [this message]
2022-07-13 9:52 ` [PATCH 01/14] imx: kontron-sl-mx8mm: Remove LVDS board type and devicetrees Frieder Schrempf
2022-07-13 9:52 ` [PATCH 02/14] imx: kontron-sl-mx8mm: Add redundant environment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 03/14] imx: kontron-sl-mx8mm: Enable environment in MMC Frieder Schrempf
2022-07-13 9:52 ` [PATCH 04/14] imx: kontron-sl-mx8mm: Migrate to use CONFIG_EXTRA_ENV_TEXT Frieder Schrempf
2022-07-13 9:52 ` [PATCH 05/14] imx: kontron-sl-mx8mm: Enable bootaux command Frieder Schrempf
2022-07-13 9:52 ` [PATCH 06/14] imx: kontron-sl-mx8mm: lpddr4_timing.c: Add spaces for proper alignment Frieder Schrempf
2022-07-13 9:52 ` [PATCH 07/14] imx: kontron-sl-mx8mm: Remove 100mt DDR setpoint Frieder Schrempf
2022-07-13 9:52 ` [PATCH 08/14] imx: kontron-sl-mx8mm: Use new LPDDR4 config parameters Frieder Schrempf
2022-07-13 9:52 ` [PATCH 09/14] imx: kontron-sl-mx8mm: Prepare for other i.MX8MM SoM types Frieder Schrempf
2022-07-13 9:52 ` [PATCH 10/14] imx: kontron-sl-mx8mm: Adjust board and SoM model strings Frieder Schrempf
2022-07-13 9:52 ` [PATCH 11/14] imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf
2022-07-14 15:23 ` Heiko Thiery
2022-07-13 9:52 ` [PATCH 12/14] imx: kontron-sl-mx8mm: Use voltage rail names from schematic for PMIC regulator-names Frieder Schrempf
2022-07-13 9:52 ` [PATCH 13/14] imx: kontron-sl-mx8mm: Simplify code in spl.c Frieder Schrempf
2022-07-13 9:52 ` [PATCH 14/14] imx: kontron-sl-mx8mm: Add support for Kontron Electronics SoM SL i.MX8MM OSM-S Frieder Schrempf
2022-07-25 13:03 ` [PATCH 00/14] imx: kontron-sl-mx8mm: Improvements and OSM board support Stefano Babic
2022-08-01 10:31 ` Frieder Schrempf
2022-08-01 11:23 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713095229.43274-1-frieder@fris.de \
--to=frieder@fris.de \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.