From: Daniel Henrique Barboza <danielhb413@gmail.com>
To: qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, danielhb413@gmail.com,
peter.maydell@linaro.org, richard.henderson@linaro.org,
Matheus Ferst <matheus.ferst@eldorado.org.br>,
Laurent Vivier <laurent@vivier.eu>
Subject: [PULL 11/30] target/ppc: fix exception error code in helper_{load, store}_dcr
Date: Mon, 18 Jul 2022 14:21:49 -0300 [thread overview]
Message-ID: <20220718172208.1247624-12-danielhb413@gmail.com> (raw)
In-Reply-To: <20220718172208.1247624-1-danielhb413@gmail.com>
From: Matheus Ferst <matheus.ferst@eldorado.org.br>
POWERPC_EXCP_INVAL should only be or-ed with other constants prefixed
with POWERPC_EXCP_INVAL_. Also, take the opportunity to move both
helpers under #if !defined(CONFIG_USER_ONLY) as the instructions that
use them are privileged.
No functional change is intended, the lower 4 bits of the error code are
ignored by all powerpc_excp_* methods on POWERPC_EXCP_INVAL exceptions.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
target/ppc/helper.h | 2 +-
target/ppc/timebase_helper.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/target/ppc/helper.h b/target/ppc/helper.h
index ed0641a234..2f112b7de0 100644
--- a/target/ppc/helper.h
+++ b/target/ppc/helper.h
@@ -694,10 +694,10 @@ DEF_HELPER_2(book3s_msgclr, void, env, tl)
DEF_HELPER_4(dlmzb, tl, env, tl, tl, i32)
#if !defined(CONFIG_USER_ONLY)
DEF_HELPER_2(rac, tl, env, tl)
-#endif
DEF_HELPER_2(load_dcr, tl, env, tl)
DEF_HELPER_3(store_dcr, void, env, tl, tl)
+#endif
DEF_HELPER_2(load_dump_spr, void, env, i32)
DEF_HELPER_2(store_dump_spr, void, env, i32)
diff --git a/target/ppc/timebase_helper.c b/target/ppc/timebase_helper.c
index 86d01d6e4e..b80f56af7e 100644
--- a/target/ppc/timebase_helper.c
+++ b/target/ppc/timebase_helper.c
@@ -143,7 +143,6 @@ void helper_store_booke_tsr(CPUPPCState *env, target_ulong val)
{
store_booke_tsr(env, val);
}
-#endif
/*****************************************************************************/
/* Embedded PowerPC specific helpers */
@@ -169,7 +168,7 @@ target_ulong helper_load_dcr(CPUPPCState *env, target_ulong dcrn)
(uint32_t)dcrn, (uint32_t)dcrn);
raise_exception_err_ra(env, POWERPC_EXCP_PROGRAM,
POWERPC_EXCP_INVAL |
- POWERPC_EXCP_PRIV_REG, GETPC());
+ POWERPC_EXCP_INVAL_INVAL, GETPC());
}
}
return val;
@@ -192,7 +191,8 @@ void helper_store_dcr(CPUPPCState *env, target_ulong dcrn, target_ulong val)
(uint32_t)dcrn, (uint32_t)dcrn);
raise_exception_err_ra(env, POWERPC_EXCP_PROGRAM,
POWERPC_EXCP_INVAL |
- POWERPC_EXCP_PRIV_REG, GETPC());
+ POWERPC_EXCP_INVAL_INVAL, GETPC());
}
}
}
+#endif
--
2.36.1
next prev parent reply other threads:[~2022-07-18 17:45 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-18 17:21 [PULL 00/30] ppc queue Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 01/30] ppc64: Allocate IRQ lines with qdev_init_gpio_in() Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 02/30] ppc/40x: " Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 03/30] ppc/6xx: " Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 04/30] ppc/e500: " Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 05/30] ppc: Remove unused irq_inputs Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 06/30] hw/ppc: pass random seed to fdt Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 07/30] target/ppc/kvm: Skip current and parent directories in kvmppc_find_cpu_dt Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 08/30] target/ppc: Fix gen_priv_exception error value in mfspr/mtspr Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 09/30] target/ppc: fix exception error value in slbfee Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 10/30] target/ppc: remove mfdcrux and mtdcrux Daniel Henrique Barboza
2022-07-18 17:21 ` Daniel Henrique Barboza [this message]
2022-07-18 17:21 ` [PULL 12/30] target/ppc: fix PMU Group A register read/write exceptions Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 13/30] target/ppc: fix exception error code in spr_write_excp_vector Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 14/30] target/ppc: Move tlbie[l] to decode tree Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 15/30] target/ppc: Implement ISA 3.00 tlbie[l] Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 16/30] target/ppc: receive DisasContext explicitly in GEN_PRIV Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 17/30] target/ppc: add macros to check privilege level Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 18/30] target/ppc: Move slbie to decodetree Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 19/30] target/ppc: Move slbieg " Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 20/30] target/ppc: Move slbia " Daniel Henrique Barboza
2022-07-18 17:21 ` [PULL 21/30] target/ppc: Move slbmte " Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 22/30] target/ppc: Move slbmfev " Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 23/30] target/ppc: Move slbmfee " Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 24/30] target/ppc: Move slbfee " Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 25/30] target/ppc: Move slbsync " Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 26/30] target/ppc: Implement slbiag Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 27/30] target/ppc: check tb_env != 0 before printing TBU/TBL/DECR Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 28/30] ppc: Check partition and process table alignment Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 29/30] target/ppc: Improve Radix xlate level validation Daniel Henrique Barboza
2022-07-18 17:22 ` [PULL 30/30] target/ppc: Check page dir/table base alignment Daniel Henrique Barboza
2022-07-19 8:56 ` [PULL 00/30] ppc queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220718172208.1247624-12-danielhb413@gmail.com \
--to=danielhb413@gmail.com \
--cc=laurent@vivier.eu \
--cc=matheus.ferst@eldorado.org.br \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.