From: Rob Herring <robh@kernel.org>
To: Gene Chen <gene.chen.richtek@gmail.com>
Cc: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
gregkh@linuxfoundation.org, krzysztof.kozlowski+dt@linaro.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, gene_chen@richtek.com,
cy_huang@richtek.com
Subject: Re: [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
Date: Wed, 20 Jul 2022 15:39:00 -0600 [thread overview]
Message-ID: <20220720213900.GA4021129-robh@kernel.org> (raw)
In-Reply-To: <20220715100418.155011-2-gene.chen.richtek@gmail.com>
On Fri, Jul 15, 2022 at 06:04:16PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add binding for Richtek RT1711H
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> .../bindings/usb/richtek,rt1711h.yaml | 96 +++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
> new file mode 100644
> index 000000000000..b6daca71429b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Richtek RT1711H Type-C Port Switch and Power Delivery controller DT bindings
s/ DT bindings//
> +
> +maintainers:
> + - Gene Chen <gene_chen@richtek.com>
> +
> +description: |
Don't need '|' if no formatting.
> + - Richtek RT1711H TypeC PD Controller.
'-' should be dropped. Though if you can't say more than the title, you
might as well drop entirely.
> +
> +properties:
> + compatible:
> + oneOf:
Don't need oneOf with only 1 entry.
> + - enum:
> + - richtek,rt1711h
> + - richtek,rt1715
Perhaps 'description' should detail the differences in these parts.
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + wakeup-source:
> + description: enable IRQ remote wakeup, see power/wakeup-source.txt
Drop generic descriptions.
> + type: boolean
> +
> + connector:
> + type: object
> + $ref: ../connector/usb-connector.yaml#
full path:
/schemas/connector/...
> + description:
> + Properties for usb c connector.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - connector
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/usb/pd.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rt1711h@4e {
> + compatible = "richtek,rt1711h";
> + reg = <0x4e>;
> + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> +
> + connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + data-role = "dual";
> + power-role = "dual";
> + try-power-role = "sink";
> + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
> + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
> + op-sink-microwatt = <10000000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + endpoint {
> + remote-endpoint = <&usb_hs>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + endpoint {
> + remote-endpoint = <&usb_ss>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + endpoint {
> + remote-endpoint = <&dp_aux>;
> + };
> + };
> + };
> + };
> + };
> + };
> +...
> --
> 2.25.1
>
>
next prev parent reply other threads:[~2022-07-20 21:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 10:04 [PATCH 0/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-15 10:04 ` [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-07-20 21:39 ` Rob Herring [this message]
2022-07-15 10:04 ` [PATCH 2/3] usb: typec: tcpci: Add get cc tcpci callback Gene Chen
2022-07-15 13:39 ` Guenter Roeck
2022-07-15 10:04 ` [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-15 11:40 ` Greg KH
2022-07-15 13:34 ` Guenter Roeck
2022-07-16 20:56 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720213900.GA4021129-robh@kernel.org \
--to=robh@kernel.org \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=gene.chen.richtek@gmail.com \
--cc=gene_chen@richtek.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.