Re: [PATCH 06/13] ARM: ep93xx: mark most board files as unused

[Lukasz Majewski <lukma@denx.de>]

[-- Attachment #1.1: Type: text/plain, Size: 4982 bytes --]

Hi Arnd,

> From: Arnd Bergmann <arnd@arndb.de>
> 
> Most of the remaining ARM board files in the kernel have no known
> users, and we plan to remove those in early 2023.
> 
> For ep93xx, Alexander Sverdlin still has access to the edb93xx family
> of reference boards, while Nikita Shubin has a ts7250 and is working
> on a device tree conversion for those.

I do know about one actively used TS7250 based board. It is going to be
still used for some time. However, I don't have the HW with me, but may
be available when the BSP will be refurbished.

> 
> This is a total of nine machine definitions that we will keep
> around, but these are all similar machines and are defined in only
> two board files. The other six board files now have a dependency on
> CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
> 
> Cc: Nikita Shubin <nikita.shubin@maquefel.me>
> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Cc: Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Lukasz Majewski <lukma@denx.de>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/arm/configs/ep93xx_defconfig | 9 ---------
>  arch/arm/mach-ep93xx/Kconfig      | 9 +++++++++
>  2 files changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/configs/ep93xx_defconfig
> b/arch/arm/configs/ep93xx_defconfig index dd390f3b19d2..afa4f789da1f
> 100644 --- a/arch/arm/configs/ep93xx_defconfig
> +++ b/arch/arm/configs/ep93xx_defconfig
> @@ -8,7 +8,6 @@ CONFIG_EXPERT=y
>  CONFIG_ARCH_MULTI_V4T=y
>  # CONFIG_ARCH_MULTI_V7 is not set
>  CONFIG_ARCH_EP93XX=y
> -CONFIG_MACH_ADSSPHERE=y
>  CONFIG_MACH_EDB9301=y
>  CONFIG_MACH_EDB9302=y
>  CONFIG_MACH_EDB9302A=y
> @@ -17,15 +16,7 @@ CONFIG_MACH_EDB9307A=y
>  CONFIG_MACH_EDB9312=y
>  CONFIG_MACH_EDB9315=y
>  CONFIG_MACH_EDB9315A=y
> -CONFIG_MACH_GESBC9312=y
> -CONFIG_MACH_MICRO9H=y
> -CONFIG_MACH_MICRO9M=y
> -CONFIG_MACH_MICRO9L=y
> -CONFIG_MACH_MICRO9S=y
> -CONFIG_MACH_SIM_ONE=y
> -CONFIG_MACH_SNAPPER_CL15=y
>  CONFIG_MACH_TS72XX=y
> -CONFIG_MACH_VISION_EP9307=y
>  CONFIG_AEABI=y
>  CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
>  CONFIG_MODULES=y
> diff --git a/arch/arm/mach-ep93xx/Kconfig
> b/arch/arm/mach-ep93xx/Kconfig index ecac8b487dae..f96d14073b91 100644
> --- a/arch/arm/mach-ep93xx/Kconfig
> +++ b/arch/arm/mach-ep93xx/Kconfig
> @@ -27,6 +27,7 @@ comment "EP93xx Platforms"
>  
>  config MACH_ADSSPHERE
>  	bool "Support ADS Sphere"
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the ADS
>  	  Sphere board.
> @@ -99,6 +100,7 @@ config MACH_EDB9315A
>  
>  config MACH_GESBC9312
>  	bool "Support Glomation GESBC-9312-sx"
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
> Glomation GESBC-9312-sx board.
> @@ -109,6 +111,7 @@ config MACH_MICRO9
>  config MACH_MICRO9H
>  	bool "Support Contec Micro9-High"
>  	select MACH_MICRO9
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Contec Micro9-High board.
> @@ -116,6 +119,7 @@ config MACH_MICRO9H
>  config MACH_MICRO9M
>  	bool "Support Contec Micro9-Mid"
>  	select MACH_MICRO9
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Contec Micro9-Mid board.
> @@ -123,6 +127,7 @@ config MACH_MICRO9M
>  config MACH_MICRO9L
>  	bool "Support Contec Micro9-Lite"
>  	select MACH_MICRO9
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Contec Micro9-Lite board.
> @@ -130,18 +135,21 @@ config MACH_MICRO9L
>  config MACH_MICRO9S
>  	bool "Support Contec Micro9-Slim"
>  	select MACH_MICRO9
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Contec Micro9-Slim board.
>  
>  config MACH_SIM_ONE
>          bool "Support Simplemachines Sim.One board"
> +	depends on UNUSED_BOARD_FILES
>          help
>            Say 'Y' here if you want your kernel to support the
>            Simplemachines Sim.One board.
>  
>  config MACH_SNAPPER_CL15
>  	bool "Support Bluewater Systems Snapper CL15 Module"
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
> Bluewater Systems Snapper CL15 Module.
> @@ -154,6 +162,7 @@ config MACH_TS72XX
>  
>  config MACH_VISION_EP9307
>  	bool "Support Vision Engraving Systems EP9307 SoM"
> +	depends on UNUSED_BOARD_FILES
>  	help
>  	  Say 'Y' here if you want your kernel to support the
>  	  Vision Engraving Systems EP9307 SoM.




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel