[PATCH v3 10/32] drm/via: Add via_dac.c

[Kevin Brace <kevinbrace@gmx.com>]

From: Kevin Brace <kevinbrace@bracecomputerlab.com>

Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com>
---
 drivers/gpu/drm/via/via_dac.c | 504 ++++++++++++++++++++++++++++++++++
 1 file changed, 504 insertions(+)
 create mode 100644 drivers/gpu/drm/via/via_dac.c

diff --git a/drivers/gpu/drm/via/via_dac.c b/drivers/gpu/drm/via/via_dac.c
new file mode 100644
index 000000000000..0e133c6f6551
--- /dev/null
+++ b/drivers/gpu/drm/via/via_dac.c
@@ -0,0 +1,504 @@
+/*
+ * Copyright © 2016-2018 Kevin Brace.
+ * Copyright 2012 James Simmons. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Author(s):
+ * Kevin Brace <kevinbrace@bracecomputerlab.com>
+ * James Simmons <jsimmons@infradead.org>
+ */
+
+#include <linux/pci.h>
+
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_probe_helper.h>
+
+#include "via_crtc_hw.h"
+#include "via_drv.h"
+
+
+/*
+ * Enables or disables DAC (VGA) output.
+ */
+static void via_dac_power(struct via_drm_priv *dev_priv, bool outputState)
+{
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+
+	via_dac_set_power(VGABASE, outputState);
+	DRM_INFO("DAC (VGA) Power: %s\n",
+			outputState ? "On" : "Off");
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+/*
+ * Set DAC (VGA) sync polarity.
+ */
+static void via_dac_sync_polarity(struct via_drm_priv *dev_priv,
+					unsigned int flags)
+{
+	u8 syncPolarity = 0x00;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	if (flags & DRM_MODE_FLAG_NHSYNC) {
+		syncPolarity |= BIT(0);
+	}
+
+	if (flags & DRM_MODE_FLAG_NVSYNC) {
+		syncPolarity |= BIT(1);
+	}
+
+	via_dac_set_sync_polarity(VGABASE, syncPolarity);
+	DRM_INFO("DAC (VGA) Horizontal Sync Polarity: %s\n",
+		(syncPolarity & BIT(0)) ? "-" : "+");
+	DRM_INFO("DAC (VGA) Vertical Sync Polarity: %s\n",
+		(syncPolarity & BIT(1)) ? "-" : "+");
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+/*
+ * Sets DAC (VGA) display source.
+ */
+static void via_dac_display_source(struct via_drm_priv *dev_priv,
+					int index)
+{
+	u8 displaySource = index;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	via_dac_set_display_source(VGABASE, displaySource & 0x01);
+	DRM_INFO("DAC (VGA) Display Source: IGA%d\n",
+			(displaySource & 0x01) + 1);
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+/*
+ * Routines for controlling stuff on the DAC port
+ */
+static const struct drm_encoder_funcs via_dac_enc_funcs = {
+	.destroy = via_encoder_cleanup,
+};
+
+/*
+ * Manage the power state of DAC (VGA).
+ */
+static void via_dac_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_ON);
+		via_dac_power(dev_priv, true);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_STANDBY);
+		via_dac_power(dev_priv, true);
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_SUSPEND);
+		via_dac_power(dev_priv, true);
+		break;
+	case DRM_MODE_DPMS_OFF:
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF);
+		via_dac_power(dev_priv, false);
+		break;
+	default:
+		DRM_ERROR("Bad DPMS mode.");
+		break;
+	}
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+/* Pass our mode to the connectors and the CRTC to give them a chance to
+ * adjust it according to limitations or connector properties, and also
+ * a chance to reject the mode entirely. Useful for things like scaling.
+ */
+static bool via_dac_mode_fixup(struct drm_encoder *encoder,
+				const struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	drm_mode_set_crtcinfo(adjusted_mode, 0);
+	return true;
+}
+
+/*
+ * Handle DAC (VGA) mode setting.
+ */
+static void via_dac_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+	struct via_crtc *iga = container_of(encoder->crtc, struct via_crtc, base);
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	via_dac_sync_polarity(dev_priv, adjusted_mode->flags);
+	via_dac_display_source(dev_priv, iga->index);
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+static void via_dac_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	if (encoder->crtc) {
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF);
+		via_dac_power(dev_priv, false);
+	}
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+static void via_dac_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	if (encoder->crtc) {
+		via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_ON);
+		via_dac_power(dev_priv, true);
+	}
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+static void via_dac_disable(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF);
+	via_dac_power(dev_priv, false);
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+static const struct drm_encoder_helper_funcs via_dac_enc_helper_funcs = {
+	.dpms = via_dac_dpms,
+	.mode_fixup = via_dac_mode_fixup,
+	.mode_set = via_dac_mode_set,
+	.prepare = via_dac_prepare,
+	.commit = via_dac_commit,
+	.disable = via_dac_disable,
+};
+
+static enum drm_connector_status
+via_dac_detect(struct drm_connector *connector, bool force)
+{
+	struct via_connector *con = container_of(connector,
+					struct via_connector, base);
+	enum drm_connector_status ret = connector_status_disconnected;
+	struct i2c_adapter *i2c_bus;
+	struct edid *edid = NULL;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	if (con->i2c_bus & VIA_I2C_BUS1) {
+		i2c_bus = via_find_ddc_bus(0x26);
+	} else {
+		i2c_bus = NULL;
+	}
+
+	if (i2c_bus) {
+		edid = drm_get_edid(&con->base, i2c_bus);
+		if (edid) {
+			if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) {
+				ret = connector_status_connected;
+			}
+
+			kfree(edid);
+			goto exit;
+		}
+	}
+
+	if (con->i2c_bus & VIA_I2C_BUS2) {
+		i2c_bus = via_find_ddc_bus(0x31);
+	} else {
+		i2c_bus = NULL;
+	}
+
+	if (i2c_bus) {
+		edid = drm_get_edid(&con->base, i2c_bus);
+		if (edid) {
+			if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) {
+				ret = connector_status_connected;
+			}
+
+			kfree(edid);
+			goto exit;
+		}
+	}
+
+exit:
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+	return ret;
+}
+
+static const struct drm_connector_funcs via_dac_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = via_dac_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = via_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state =
+			drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state =
+			drm_atomic_helper_connector_destroy_state,
+};
+
+static enum drm_mode_status via_dac_mode_valid(
+					struct drm_connector *connector,
+					struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+	int min_clock, max_clock;
+	enum drm_mode_status status = MODE_OK;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	min_clock = 25000;
+	switch (pdev->device) {
+	/* CLE266 Chipset */
+	case PCI_DEVICE_ID_VIA_CLE266_GFX:
+	/* KM400(A) / KN400(A) / P4M800 Chipset */
+	case PCI_DEVICE_ID_VIA_KM400_GFX:
+		max_clock = 250000;
+		break;
+	/* K8M800(A) / K8N800(A) Chipset */
+	case PCI_DEVICE_ID_VIA_K8M800_GFX:
+	/* P4M800 Pro / P4M800CE / VN800 / CN700 / CN333 / CN400 Chipset */
+	case PCI_DEVICE_ID_VIA_P4M800_PRO_GFX:
+		max_clock = 300000;
+		break;
+	/* PM800 / PN800 / PM880 / PN880 Chipset */
+	case PCI_DEVICE_ID_VIA_PM800_GFX:
+	/* P4M890 / P4N890 Chipset */
+	case PCI_DEVICE_ID_VIA_P4M890_GFX:
+	/* K8M890 / K8N890 Chipset */
+	case PCI_DEVICE_ID_VIA_CHROME9:
+	/* P4M900 / VN896 / CN896 Chipset */
+	case PCI_DEVICE_ID_VIA_CHROME9_HC:
+	/* CX700(M/M2) / VX700(M/M2) Chipset */
+	case PCI_DEVICE_ID_VIA_UNICHROME_PRO_II:
+	/* VX800 / VX820 Chipset */
+	case PCI_DEVICE_ID_VIA_CHROME9_HC3:
+	/* VX855 / VX875 Chipset */
+	case PCI_DEVICE_ID_VIA_CHROME9_HCM:
+	/* VX900(H) Chipset */
+	case PCI_DEVICE_ID_VIA_CHROME9_HD:
+		max_clock = 350000;
+		break;
+	/* Illegal condition (should never get here) */
+	default:
+		max_clock = 0;
+		break;
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
+		status = MODE_NO_DBLESCAN;
+		goto exit;
+	}
+
+	if (mode->clock < min_clock) {
+		status = MODE_CLOCK_LOW;
+		goto exit;
+	}
+
+	if (mode->clock > max_clock) {
+		status = MODE_CLOCK_HIGH;
+		goto exit;
+	}
+
+exit:
+	DRM_DEBUG_KMS("status: %u\n", status);
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+	return status;
+}
+
+static int via_dac_get_modes(struct drm_connector *connector)
+{
+	struct via_connector *con = container_of(connector,
+					struct via_connector, base);
+	int count = 0;
+	struct i2c_adapter *i2c_bus;
+	struct edid *edid = NULL;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	if (con->i2c_bus & VIA_I2C_BUS1) {
+		i2c_bus = via_find_ddc_bus(0x26);
+	} else {
+		i2c_bus = NULL;
+	}
+
+	if (i2c_bus) {
+		edid = drm_get_edid(&con->base, i2c_bus);
+		if (edid) {
+			if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) {
+				drm_connector_update_edid_property(connector,
+									edid);
+				count = drm_add_edid_modes(connector, edid);
+			}
+
+			kfree(edid);
+			goto exit;
+		}
+	}
+
+	if (con->i2c_bus & VIA_I2C_BUS2) {
+		i2c_bus = via_find_ddc_bus(0x31);
+	} else {
+		i2c_bus = NULL;
+	}
+
+	if (i2c_bus) {
+		edid = drm_get_edid(&con->base, i2c_bus);
+		if (edid) {
+			if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) {
+				drm_connector_update_edid_property(connector,
+									edid);
+				count = drm_add_edid_modes(connector, edid);
+			}
+
+			kfree(edid);
+			goto exit;
+		}
+	}
+
+exit:
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+	return count;
+}
+
+static const struct drm_connector_helper_funcs
+via_dac_connector_helper_funcs = {
+	.mode_valid = via_dac_mode_valid,
+	.get_modes = via_dac_get_modes,
+};
+
+void via_dac_probe(struct drm_device *dev)
+{
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+	u16 chipset = pdev->device;
+	u8 sr13, sr5a;
+
+	DRM_DEBUG_KMS("Entered %s.\n", __func__);
+
+	switch (chipset) {
+	case PCI_DEVICE_ID_VIA_UNICHROME_PRO_II:
+	case PCI_DEVICE_ID_VIA_CHROME9_HC3:
+	case PCI_DEVICE_ID_VIA_CHROME9_HCM:
+	case PCI_DEVICE_ID_VIA_CHROME9_HD:
+		sr5a = vga_rseq(VGABASE, 0x5a);
+		DRM_DEBUG_KMS("SR5A: 0x%02x\n", sr5a);
+
+		/* Setting SR5A[0] to 1.
+		 * This allows the reading out the alternative
+		 * pin strapping information from SR12 and SR13. */
+		svga_wseq_mask(VGABASE, 0x5a, BIT(0), BIT(0));
+		DRM_DEBUG_KMS("SR5A: 0x%02x\n", sr5a);
+
+		sr13 = vga_rseq(VGABASE, 0x13);
+		DRM_DEBUG_KMS("SR13: 0x%02x\n", sr13);
+
+		if (!(sr13 & BIT(2))) {
+			dev_priv->dac_presence = true;
+			DRM_DEBUG_KMS("Detected the presence of VGA.\n");
+		} else {
+			dev_priv->dac_presence = false;
+		}
+
+		/* Restore SR5A. */
+		vga_wseq(VGABASE, 0x5a, sr5a);
+		break;
+	default:
+		dev_priv->dac_presence = true;
+		DRM_DEBUG_KMS("Detected the presence of VGA.\n");
+		break;
+	}
+
+	dev_priv->dac_i2c_bus = VIA_I2C_NONE;
+
+	if (dev_priv->dac_presence) {
+		dev_priv->dac_i2c_bus = VIA_I2C_BUS2 | VIA_I2C_BUS1;
+	}
+
+	dev_priv->mapped_i2c_bus |= dev_priv->dac_i2c_bus;
+
+	DRM_DEBUG_KMS("Exiting %s.\n", __func__);
+}
+
+void via_dac_init(struct drm_device *dev)
+{
+	struct via_connector *con;
+	struct via_encoder *enc;
+	struct via_drm_priv *dev_priv = to_via_drm_priv(dev);
+
+	enc = kzalloc(sizeof(*enc) + sizeof(*con), GFP_KERNEL);
+	if (!enc) {
+		DRM_ERROR("Failed to allocate connector and encoder\n");
+		return;
+	}
+	con = &enc->cons[0];
+	INIT_LIST_HEAD(&con->props);
+
+	/* Piece together our connector */
+	drm_connector_init(dev, &con->base, &via_dac_connector_funcs,
+				DRM_MODE_CONNECTOR_VGA);
+	drm_connector_helper_add(&con->base, &via_dac_connector_helper_funcs);
+	drm_connector_register(&con->base);
+
+	con->i2c_bus = dev_priv->dac_i2c_bus;
+	con->base.doublescan_allowed = false;
+	con->base.interlace_allowed = true;
+
+	/* Setup the encoders and attach them */
+	drm_encoder_init(dev, &enc->base, &via_dac_enc_funcs,
+						DRM_MODE_ENCODER_DAC, NULL);
+	drm_encoder_helper_add(&enc->base, &via_dac_enc_helper_funcs);
+
+	enc->base.possible_crtcs = BIT(1) | BIT(0);
+	enc->base.possible_clones = 0;
+	enc->di_port = VIA_DI_PORT_NONE;
+
+	drm_connector_attach_encoder(&con->base, &enc->base);
+}
--
2.35.1