[PATCH v1 2/2] dt-binding: iio: time: add capture-tiecap.yaml

[Julien Panis <jpanis@baylibre.com>]

This commit adds a YAML binding for TI ECAP used in capture operating mode.

Signed-off-by: Julien Panis <jpanis@baylibre.com>
---
 .../bindings/iio/time/capture-tiecap.yaml     | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml

diff --git a/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml b/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml
new file mode 100644
index 000000000000..4f08e49a8506
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/time/capture-tiecap.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/capture-tiecap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ecap0: capture@23100000 { /* eCAP in capture mode on am62x */
+        compatible = "ti,am62-ecap-capture";
+        reg = <0x00 0x23100000 0x00 0x100>;
+        interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+        clocks = <&k3_clks 51 0>;
+        clock-names = "fck";
+    };
-- 
2.25.1