All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-usb@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>, Chanwoo Choi <cw00.choi@samsung.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Yassine Oudjana <y.oudjana@protonmail.com>
Subject: [PATCH 1/2] extcon: usbc-tusb320: Factor out extcon into dedicated functions
Date: Sat, 30 Jul 2022 20:04:59 +0200	[thread overview]
Message-ID: <20220730180500.152004-1-marex@denx.de> (raw)

Move extcon code into separate functions in preparation for addition of
USB TYPE-C support. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
To: linux-usb@vger.kernel.org
---
 drivers/extcon/extcon-usbc-tusb320.c | 75 +++++++++++++++++-----------
 1 file changed, 46 insertions(+), 29 deletions(-)

diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 6ba3d89b106d0..aced4bbb455dc 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -184,19 +184,9 @@ static struct tusb320_ops tusb320l_ops = {
 	.get_revision = tusb320l_get_revision,
 };
 
-static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
 {
-	struct tusb320_priv *priv = dev_id;
 	int state, polarity;
-	unsigned reg;
-
-	if (regmap_read(priv->regmap, TUSB320_REG9, &reg)) {
-		dev_err(priv->dev, "error during i2c read!\n");
-		return IRQ_NONE;
-	}
-
-	if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
-		return IRQ_NONE;
 
 	state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
 		TUSB320_REG9_ATTACHED_STATE_MASK;
@@ -219,6 +209,22 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
 	extcon_sync(priv->edev, EXTCON_USB_HOST);
 
 	priv->state = state;
+}
+
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+	struct tusb320_priv *priv = dev_id;
+	unsigned int reg;
+
+	if (regmap_read(priv->regmap, TUSB320_REG9, &reg)) {
+		dev_err(priv->dev, "error during i2c read!\n");
+		return IRQ_NONE;
+	}
+
+	if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+		return IRQ_NONE;
+
+	tusb320_extcon_irq_handler(priv, reg);
 
 	regmap_write(priv->regmap, TUSB320_REG9, reg);
 
@@ -230,8 +236,32 @@ static const struct regmap_config tusb320_regmap_config = {
 	.val_bits = 8,
 };
 
-static int tusb320_extcon_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static int tusb320_extcon_probe(struct tusb320_priv *priv)
+{
+	int ret;
+
+	priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
+	if (IS_ERR(priv->edev)) {
+		dev_err(priv->dev, "failed to allocate extcon device\n");
+		return PTR_ERR(priv->edev);
+	}
+
+	ret = devm_extcon_dev_register(priv->dev, priv->edev);
+	if (ret < 0) {
+		dev_err(priv->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	extcon_set_property_capability(priv->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+
+	return 0;
+}
+
+static int tusb320_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
 	struct tusb320_priv *priv;
 	const void *match_data;
@@ -257,12 +287,6 @@ static int tusb320_extcon_probe(struct i2c_client *client,
 
 	priv->ops = (struct tusb320_ops*)match_data;
 
-	priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
-	if (IS_ERR(priv->edev)) {
-		dev_err(priv->dev, "failed to allocate extcon device\n");
-		return PTR_ERR(priv->edev);
-	}
-
 	if (priv->ops->get_revision) {
 		ret = priv->ops->get_revision(priv, &revision);
 		if (ret)
@@ -272,16 +296,9 @@ static int tusb320_extcon_probe(struct i2c_client *client,
 			dev_info(priv->dev, "chip revision %d\n", revision);
 	}
 
-	ret = devm_extcon_dev_register(priv->dev, priv->edev);
-	if (ret < 0) {
-		dev_err(priv->dev, "failed to register extcon device\n");
+	ret = tusb320_extcon_probe(priv);
+	if (ret)
 		return ret;
-	}
-
-	extcon_set_property_capability(priv->edev, EXTCON_USB,
-				       EXTCON_PROP_USB_TYPEC_POLARITY);
-	extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
-				       EXTCON_PROP_USB_TYPEC_POLARITY);
 
 	/* update initial state */
 	tusb320_irq_handler(client->irq, priv);
@@ -313,7 +330,7 @@ static const struct of_device_id tusb320_extcon_dt_match[] = {
 MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
 
 static struct i2c_driver tusb320_extcon_driver = {
-	.probe		= tusb320_extcon_probe,
+	.probe		= tusb320_probe,
 	.driver		= {
 		.name	= "extcon-tusb320",
 		.of_match_table = tusb320_extcon_dt_match,
-- 
2.35.1


             reply	other threads:[~2022-07-30 18:05 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-30 18:04 Marek Vasut [this message]
2022-07-30 18:05 ` [PATCH 2/2] extcon: usbc-tusb320: Add USB TYPE-C support Marek Vasut
2022-07-30 20:39   ` kernel test robot
2022-07-30 20:49   ` kernel test robot
2022-08-02  7:40   ` Heikki Krogerus
2022-08-23 10:40     ` Marek Vasut
2022-08-23  9:49   ` Alvin Šipraga
2022-08-23 10:39     ` Marek Vasut
2022-08-23 12:57       ` Alvin Šipraga
2022-08-23 14:07         ` Marek Vasut
2022-08-23 22:36   ` Chanwoo Choi
2022-08-02  7:39 ` [PATCH 1/2] extcon: usbc-tusb320: Factor out extcon into dedicated functions Heikki Krogerus
2022-08-23 22:26 ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220730180500.152004-1-marex@denx.de \
    --to=marex@denx.de \
    --cc=cw00.choi@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=y.oudjana@protonmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.