All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Niedermaier <cniedermaier@dh-electronics.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <festevam@gmail.com>, Marek Vasut <marex@denx.de>,
	NXP Linux Team <linux-imx@nxp.com>, <kernel@dh-electronics.com>
Subject: [PATCH V2] ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
Date: Tue, 16 Aug 2022 14:41:33 +0200	[thread overview]
Message-ID: <20220816124133.41023-1-cniedermaier@dh-electronics.com> (raw)

The SoM itself provides the display interface, see [1] page 20.
Those pins have to be used as the RGB/DPI interface or not used
at all. So rather than duplicate the pinmux settings in every
carrier board DT, better move them into the SoM DTSI.

[1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
---
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
---
V2: - Improve commit message
---
 arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi | 33 -------------------------------
 arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi  | 33 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
index fe72650295a5..6248b126b557 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -332,37 +332,4 @@
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
 		>;
 	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
index 5befbe13d1a3..eaa87b333164 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -667,6 +667,39 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-08-16 12:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-16 12:41 Christoph Niedermaier [this message]
2022-08-17  7:01 ` [PATCH V2] ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file Krzysztof Kozlowski
2022-08-22  2:37 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220816124133.41023-1-cniedermaier@dh-electronics.com \
    --to=cniedermaier@dh-electronics.com \
    --cc=festevam@gmail.com \
    --cc=kernel@dh-electronics.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.