From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Eli Cohen <elic@nvidia.com>,
Maor Dickman <maord@nvidia.com>, Mark Bloch <mbloch@nvidia.com>
Subject: [net 02/13] net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
Date: Mon, 22 Aug 2022 12:59:06 -0700 [thread overview]
Message-ID: <20220822195917.216025-3-saeed@kernel.org> (raw)
In-Reply-To: <20220822195917.216025-1-saeed@kernel.org>
From: Eli Cohen <elic@nvidia.com>
Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered.
Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and
ldev->pf[MLX5_LAG_P1].dev have valid pointers when
MLX5_LAG_FLAG_NDEVS_READY is set.
The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and
clearing it. Setting it is done wrongly when both
ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set;
clearing it is done right when either of ldev->pf[i].netdev is cleared.
Consider the following scenario:
1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer
2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and
ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in
MLX5_LAG_FLAG_NDEVS_READY is set.
3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev.
MLX5_LAG_FLAG_NDEVS_READY remains set.
Further execution of mlx5_do_bond() will result in null pointer
dereference when calling mlx5_lag_is_multipath()
This patch fixes the following call trace actually encountered:
[ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8
[ 1293.478756] #PF: supervisor read access in kernel mode
[ 1293.481320] #PF: error_code(0x0000) - not-present page
[ 1293.483686] PGD 0 P4D 0
[ 1293.484434] Oops: 0000 [#1] SMP PTI
[ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1
[ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
[ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core]
[ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8
[ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202
[ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000
[ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000
[ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c
[ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0
[ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858
[ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000
[ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0
[ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: 8a66e4585979 ("net/mlx5: Change ownership model for lag")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
index 0f34e3c80d1f..f67d29164962 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c
@@ -1234,7 +1234,7 @@ void mlx5_lag_add_netdev(struct mlx5_core_dev *dev,
mlx5_ldev_add_netdev(ldev, dev, netdev);
for (i = 0; i < ldev->ports; i++)
- if (!ldev->pf[i].dev)
+ if (!ldev->pf[i].netdev)
break;
if (i >= ldev->ports)
--
2.37.1
next prev parent reply other threads:[~2022-08-22 20:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-22 19:59 [pull request][net 00/13] mlx5 fixes 2022-08-22 Saeed Mahameed
2022-08-22 19:59 ` [net 01/13] net/mlx5e: Properly disable vlan strip on non-UL reps Saeed Mahameed
2022-08-24 1:00 ` patchwork-bot+netdevbpf
2022-08-22 19:59 ` Saeed Mahameed [this message]
2022-08-22 19:59 ` [net 03/13] net/mlx5: Eswitch, Fix forwarding decision to uplink Saeed Mahameed
2022-08-22 19:59 ` [net 04/13] net/mlx5: Disable irq when locking lag_lock Saeed Mahameed
2022-08-22 19:59 ` [net 05/13] net/mlx5: Fix cmd error logging for manage pages cmd Saeed Mahameed
2022-08-22 19:59 ` [net 06/13] net/mlx5: Avoid false positive lockdep warning by adding lock_class_key Saeed Mahameed
2022-08-22 19:59 ` [net 07/13] net/mlx5e: Fix wrong application of the LRO state Saeed Mahameed
2022-08-22 19:59 ` [net 08/13] net/mlx5e: TC, Add missing policer validation Saeed Mahameed
2022-08-22 19:59 ` [net 09/13] net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off Saeed Mahameed
2022-08-22 19:59 ` [net 10/13] net/mlx5: unlock on error path in esw_vfs_changed_event_handler() Saeed Mahameed
2022-08-22 19:59 ` [net 11/13] net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup() Saeed Mahameed
2022-08-22 19:59 ` [net 12/13] net/mlx5e: Fix use after free in mlx5e_fs_init() Saeed Mahameed
2022-08-22 19:59 ` [net 13/13] net/mlx5: Unlock on error in mlx5_sriov_enable() Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220822195917.216025-3-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=elic@nvidia.com \
--cc=kuba@kernel.org \
--cc=maord@nvidia.com \
--cc=mbloch@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.