From: Bjorn Helgaas <helgaas@kernel.org>
To: "David E. Box" <david.e.box@linux.intel.com>
Cc: nirmal.patel@linux.intel.com, jonathan.derrick@linux.dev,
lorenzo.pieralisi@arm.com, hch@infradead.org, kw@linux.com,
robh@kernel.org, bhelgaas@google.com,
michael.a.bottini@linux.intel.com, rafael@kernel.org,
me@adhityamohan.in, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V6 1/3] PCI/ASPM: Add pci_enable_default_link_state()
Date: Fri, 26 Aug 2022 12:01:30 -0500 [thread overview]
Message-ID: <20220826170130.GA2933762@bhelgaas> (raw)
In-Reply-To: <20220301041943.2935892-2-david.e.box@linux.intel.com>
On Mon, Feb 28, 2022 at 08:19:41PM -0800, David E. Box wrote:
> From: Michael Bottini <michael.a.bottini@linux.intel.com>
>
> Add pci_enable_default_link_state() to allow devices to change the default
> BIOS configured states. Clears the BIOS default settings then sets the new
> states and reconfigures the link under the semaphore. Also add
> PCIE_LINK_STATE_ALL macro for convenience for callers that want to enable
> all link states.
>
> Signed-off-by: Michael Bottini <michael.a.bottini@linux.intel.com>
> Signed-off-by: David E. Box <david.e.box@linux.intel.com>
With minor changes below,
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> + * pci_enable_default_link_state - Clears and sets the default device link state
> + * so that the link may be allowed to enter the specified states. Note that
> + * if the BIOS didn't grant ASPM control to the OS, this does nothing because
> + * we can't touch the LNKCTL register. Also note that this does not enable
> + * states disabled by pci_disable_link_state(). Returns 0 or a negative errno.
"Clear and set" to match imperative mood of similar comments.
Similarly "Return 0 or ...".
> + *
> + * @pdev: PCI device
> + * @state: Mask of ASPM link states to enable
> + */
> +int pci_enable_default_link_state(struct pci_dev *pdev, int state)
I think "pci_enable_link_state()" would be a better name since
"default" isn't relevant to the caller and it would be more parallel
with pci_disable_link_state().
> +{
> + struct pcie_link_state *link = pcie_aspm_get_link(pdev);
> +
> + if (!link)
> + return -EINVAL;
> + /*
> + * A driver requested that ASPM be enabled on this device, but
> + * if we don't have permission to manage ASPM (e.g., on ACPI
> + * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
> + * the _OSC method), we can't honor that request.
> + */
> + if (aspm_disabled) {
> + pci_warn(pdev, "can't override BIOS ASPM; OS doesn't have ASPM control\n");
> + return -EPERM;
> + }
> +
> + down_read(&pci_bus_sem);
> + mutex_lock(&aspm_lock);
> + link->aspm_default = 0;
> + if (state & PCIE_LINK_STATE_L0S)
> + link->aspm_default |= ASPM_STATE_L0S;
> + if (state & PCIE_LINK_STATE_L1)
> + /* L1 PM substates require L1 */
> + link->aspm_default |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
> + if (state & PCIE_LINK_STATE_L1_1)
> + link->aspm_default |= ASPM_STATE_L1_1;
> + if (state & PCIE_LINK_STATE_L1_2)
> + link->aspm_default |= ASPM_STATE_L1_2;
> + if (state & PCIE_LINK_STATE_L1_1_PCIPM)
> + link->aspm_default |= ASPM_STATE_L1_1_PCIPM;
> + if (state & PCIE_LINK_STATE_L1_2_PCIPM)
> + link->aspm_default |= ASPM_STATE_L1_2_PCIPM;
> + pcie_config_aspm_link(link, policy_to_aspm_state(link));
> +
> + link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0;
> + pcie_set_clkpm(link, policy_to_clkpm_state(link));
> + mutex_unlock(&aspm_lock);
> + up_read(&pci_bus_sem);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(pci_enable_default_link_state);
> +
> static int pcie_aspm_set_policy(const char *val,
> const struct kernel_param *kp)
> {
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 8253a5413d7c..fd710afe0209 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1641,10 +1641,15 @@ extern bool pcie_ports_native;
> #define PCIE_LINK_STATE_L1_2 BIT(4)
> #define PCIE_LINK_STATE_L1_1_PCIPM BIT(5)
> #define PCIE_LINK_STATE_L1_2_PCIPM BIT(6)
> +#define PCIE_LINK_STATE_ALL (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |\
> + PCIE_LINK_STATE_CLKPM | PCIE_LINK_STATE_L1_1 |\
> + PCIE_LINK_STATE_L1_2 | PCIE_LINK_STATE_L1_1_PCIPM |\
> + PCIE_LINK_STATE_L1_2_PCIPM)
>
> #ifdef CONFIG_PCIEASPM
> int pci_disable_link_state(struct pci_dev *pdev, int state);
> int pci_disable_link_state_locked(struct pci_dev *pdev, int state);
> +int pci_enable_default_link_state(struct pci_dev *pdev, int state);
> void pcie_no_aspm(void);
> bool pcie_aspm_support_enabled(void);
> bool pcie_aspm_enabled(struct pci_dev *pdev);
> @@ -1653,6 +1658,8 @@ static inline int pci_disable_link_state(struct pci_dev *pdev, int state)
> { return 0; }
> static inline int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
> { return 0; }
> +static inline int pci_enable_default_link_state(struct pci_dev *pdev, int state)
> +{ return 0; }
> static inline void pcie_no_aspm(void) { }
> static inline bool pcie_aspm_support_enabled(void) { return false; }
> static inline bool pcie_aspm_enabled(struct pci_dev *pdev) { return false; }
> --
> 2.25.1
>
next prev parent reply other threads:[~2022-08-26 17:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-01 4:19 [PATCH V6 0/3] PCI: vmd: Enable PCIe ASPM and LTR David E. Box
2022-03-01 4:19 ` [PATCH V6 1/3] PCI/ASPM: Add pci_enable_default_link_state() David E. Box
2022-03-01 8:13 ` Christoph Hellwig
2022-03-01 13:31 ` David E. Box
2022-03-01 13:38 ` Christoph Hellwig
2022-08-26 9:16 ` Lorenzo Pieralisi
2022-08-26 17:01 ` Bjorn Helgaas [this message]
2022-03-01 4:19 ` [PATCH V6 2/3] PCI: vmd: Add vmd_device_data David E. Box
2022-08-26 9:15 ` Lorenzo Pieralisi
2022-03-01 4:19 ` [PATCH V6 3/3] PCI: vmd: Configure PCIe ASPM and LTR David E. Box
2022-08-26 17:01 ` Bjorn Helgaas
2022-09-14 20:59 ` David E. Box
2022-03-01 19:19 ` [PATCH V6 0/3] PCI: vmd: Enable " Jonathan Derrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220826170130.GA2933762@bhelgaas \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=david.e.box@linux.intel.com \
--cc=hch@infradead.org \
--cc=jonathan.derrick@linux.dev \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=me@adhityamohan.in \
--cc=michael.a.bottini@linux.intel.com \
--cc=nirmal.patel@linux.intel.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.